Faulty Indicator

[wardman]

I own a '93 DC2 Integra Vti-R, and last night I noticed that when using my right-hand indicator it makes both indicators flash :confused:
The left-hand side works fine, and this arvo I replaced the fuse but it still flashes both indicators, like I've got my hazard lights on.
If anyone has experienced this before or knows what might be causing it, any information would be greatly appreciated.

[ECU-MAN]

some times with crappy alarm installs, the use diod's to split the indicator signal, so that is one posibility, or you could have a faulty indicator switch or faulty hazard light switch.

[its.not.ali]

mines playing up too now,

waht do u mean by faulty hazard light switch, whenever i turn the hazards on ... fuses blow lol wtf?

[IZY-10]

either pull apart the stalk and clean it or replace your relay your indicaters use

[its.not.ali]

when i indicate left, all is well
when i indicate right, fuse blows
when i turn the hazards on, fuses blow (both indicator and hazard fuses)

sounds like something on the right hand side of things.

can u link me with how to clean the stalk, and ive been told if the relay was faulty, both side wont wurk.. thanks for the help :)

[IZY-10]

[QUOTE=its.not.ali;999083 and ive been told if the relay was faulty, both side wont wurk.. thanks for the help :)[/QUOTE]

well i had the same problem on my relos car i pulled apart the stalk and just cleaned all the dust out. It worked for a while however, i replace the relay and it works fine now

[IZY-10]

talk about bringing up old threads:D

[its.not.ali]

lol usually someone has the same problem, didnt erally look at the date of the thread, all i know is that ecu-mans always on the ball lol

so how do i go about cleaning the stalk?

[air23box]

check ur wiring.....you may have lost wires around....that happen to me when I had my old car.....and that will stuff up ur relay and that thing is not cheap....hope that helps...

[its.not.ali]

love forums...

it ended up being a combo of shitty wiring leading to the hazard switch and shorting that out...

all better now :) thanks guys