PDA

View Full Version : YBOOST ALLMOTOR DC2 new PB @ WSID!



EG5
15-04-2009, 09:59 PM
Just wanna say congrats to Damian.
YBOOST ALLMOTOR DC2R with stock internals JDM K20A swap just ran a new PB.

12.32@108mph
1.79 60ft

Another JDMyard Built Represent.
We believe there is still abit more in it.
Stay tuned!


Video here :

http://www.youtube.com/watch?v=jPgN4719sYo

http://www.youtube.com/watch?v=kpmisc7bYzo


http://www.badgerphotography.com.au/2009/CA%20090315/All%20Motor/images/1503090159.jpg

http://www.badgerphotography.com.au/2009/CA%20090315/All%20Motor/images/1503091747.jpg
Pics from compak attak 09

Limbo
15-04-2009, 10:03 PM
nice work, i'd be happy with that type of run

zco
15-04-2009, 10:03 PM
w00 ! damo is the man !
damn you damo.. why you do this to me for haha

definately more in it

dupac->
15-04-2009, 10:06 PM
in a dc2?

damn?

whats consists of this setup?>

welldone!

G-Stick
15-04-2009, 10:06 PM
niceee any pics?

Dr.k20z1
15-04-2009, 10:08 PM
damnnn thats hella good :p

delsol9000rpms
15-04-2009, 10:14 PM
I saw him put down two 12.5 passes :thumbsup: definately a quick car!

fatboyz39
15-04-2009, 10:15 PM
Well done. Great driving and shifting.

grumpy rooster
15-04-2009, 10:26 PM
Well done.

Couldn't happen to a nicer guy. :thumbsup:

YBOOST
15-04-2009, 10:43 PM
thanks fellas! lovin the car!
dumped the clutch at 7000rpm, it gripped and my head got smashed into the seat!
thanks for the over the phone tutoring yonas LOL

IEVAQ8
15-04-2009, 10:50 PM
good work mate...............

EG5
15-04-2009, 10:52 PM
thanks fellas! lovin the car!
dumped the clutch at 7000rpm, it gripped and my head got smashed into the seat!
thanks for the over the phone tutoring yonas LOL

Phone tutoring ftw! LOL
Great driving :thumbsup:
Drop those 60ft to low 1.7 and you will see 12.3 sec pass.

zco
15-04-2009, 10:53 PM
thanks for the over the phone tutoring yonas LOL

HAHAHA i got this the first time i went out to WSID aswell. it was awesome rofl

90LAN
15-04-2009, 10:54 PM
nice no's mate
very nice to see

YBOOST
15-04-2009, 11:00 PM
vids hopefully tomorrow if i get time

xtercii
15-04-2009, 11:00 PM
HAHAHA i got this the first time i went out to WSID aswell. it was awesome rofl

hahaha likewise, my 60ft time instantly improved by more than 0.3 second, full hectic haha...

hisoka
15-04-2009, 11:02 PM
nice pass congrats.

is it 16s at the front and 15 at the back ?

EG5
15-04-2009, 11:03 PM
nice pass congrats.

is it 16s at the front and 15 at the back ?

Both 15 inch wheels
M&H slicks

hisoka
15-04-2009, 11:13 PM
ohh ok nice nice.

RR-04-RR
15-04-2009, 11:16 PM
should of push the side mirrors back.. :P

could of got a quicker time lol

congrads

INVSBL
16-04-2009, 12:03 AM
WOW!
wat a time,
love to read a spec sheet of the car.
congrats!

Behtec_JunKIE
16-04-2009, 01:43 AM
congrats broda !! NNNEeehehhe

EG5
16-04-2009, 10:05 AM
WOW!
wat a time,
love to read a spec sheet of the car.
congrats!

JDMyard intake manifold
75mm TB
DTR/SSR header
3 inch exhaust
3 puck race clutch
lightened flywheel
Hondata KPRO
Avid Racing Traction bar
Paul tuned ( Pulse Racing )
Lightweight driver :thumbsup:

beeza
16-04-2009, 10:21 AM
Fully striiped I'm sure.Great work guys,I love seeing the teamwork factor!

mr_vtec
16-04-2009, 10:33 AM
congrats damo..

um i told ya when u dump those tyres ur head is going st8 into the back of the seat lol..

those tyres did on myu car a 1.72 60ft so u can do that too i had no traction bars nothing lol.

congrats and u will keep going quicker from here..


hassy

EG CIVIC
16-04-2009, 01:13 PM
Nice new PB :thumbsup:

INVSBL
16-04-2009, 01:40 PM
JDMyard intake manifold
75mm TB
DTR/SSR header
3 inch exhaust
3 puck race clutch
lightened flywheel
Hondata KPRO
Avid Racing Traction bar
Paul tuned ( Pulse Racing )
Lightweight driver :thumbsup:

Thanks for that!

haha last question, has it been dynod?
or even a rough power and tourqe figure??

EG5
16-04-2009, 03:18 PM
Thanks for that!

haha last question, has it been dynod?
or even a rough power and tourqe figure??

155.8kw@wheels
Pulse Racing Dyno

INVSBL
16-04-2009, 05:10 PM
155.8kw@wheels
pulse racing dyno

thanks!!!!!!!

YBOOST
16-04-2009, 07:10 PM
Great work by the driver and the "Advisers". Is there any wheel hop with the traction bars installed? M&H FTW (see avatar)

a little bit of wheel hop off launch

YBOOST
16-04-2009, 07:15 PM
Fully striiped I'm sure.Great work guys,I love seeing the teamwork factor!

depends how you determine fully stripped.

i race with no passanger seats,no spare wheel and no rear interior plastics. have carbon hood on too .

Door trims, dash and centre console still intact.

without driver and 1/4 tank its 1018kg

Benson
16-04-2009, 08:31 PM
Congrats on the new PB...

NightRyder
16-04-2009, 08:45 PM
Well done mate. :)

YBOOST
17-04-2009, 04:08 PM
here's some vids...

http://www.youtube.com/watch?v=jPgN4719sYo

http://www.youtube.com/watch?v=kpmisc7bYzo

http://www.youtube.com/watch?v=kpmisc7bYzo

JDM-EGG
17-04-2009, 06:22 PM
farkign fast ...

INVSBL
17-04-2009, 06:36 PM
holy shit, ur right bout it just gripping.

well done again!

beeza
18-04-2009, 10:53 AM
depends how you determine fully stripped.

i race with no passanger seats,no spare wheel and no rear interior plastics. have carbon hood on too .

Door trims, dash and centre console still intact.

without driver and 1/4 tank its 1018kg

True true.That's a nice weight and Great burnouts/vids :thumbsup:

dupac->
18-04-2009, 11:18 AM
fark launching the itr at 7k is nuts.. especially with the GRIP u have that u didnt snap or fuk up the drive shaft.. seen it happen to afew dc2r's at wsid...


good stuff !

YBOOST
18-04-2009, 11:34 AM
fark launching the itr at 7k is nuts.. especially with the GRIP u have that u didnt snap or fuk up the drive shaft.. seen it happen to afew dc2r's at wsid...


good stuff !

its gona snap one day, just gotta hope for the best on every launch LOL
until then i'll enjoy the G-force!

dupac->
18-04-2009, 01:52 PM
hahaha just have a spare one with u.. and get yonas to give u a tutorial on how to put it back in on the spot

lol

EG5
18-04-2009, 01:59 PM
its gona snap one day, just gotta hope for the best on every launch LOL
until then i'll enjoy the G-force!

If you dont bog down off the line , no problem at all.

I wanna see you doin 1.6 60ft

EG5
01-07-2009, 09:24 PM
Just got a phone call from Damo @ WSID
YBOOST ran faster today .

12.32@108mph
1.79 60ft

Congrats ! One hella quick ALLMOTOR DC2!
This should be the fastest Allmotor DC2 in Australia!

JDM.Power
01-07-2009, 09:42 PM
nice top work!!

zco
01-07-2009, 09:45 PM
yonas, you forgot to say JDMYard Represent !! HAHA LOL

good work damian.. it all comes down to the driver knowing his car i reckon.. thats where the money's at.

beeza
01-07-2009, 10:58 PM
Makes total sense to me zco,forsure aye.

Congratulations mate,that must be mad fun at the 1/4.

denrie
01-07-2009, 11:29 PM
Congrats Damo! Everytime you go to WSID u always seem to beat your old time. Wilson messaged me telling me straight after your run! lol

YBOOST
02-07-2009, 04:31 PM
thanks guys! couldnt believe it myself! broke my old PB with a 12.49 and then smashed it with the 12.32! i'll try to get the vid up of the run soon.

YBOOST
02-07-2009, 04:33 PM
Phone tutoring ftw! LOL
Great driving :thumbsup:
Drop those 60ft to low 1.7 and you will see 12.3 sec pass.



you were right about the 60ft :thumbsup:

EG5
02-07-2009, 05:59 PM
you were right about the 60ft :thumbsup:

Will help up so you can run faster.

YBOOST
02-07-2009, 08:15 PM
heres the new PB...
http://www.youtube.com/watch?v=p2Sc5O-vhBg

INVSBL
02-07-2009, 08:19 PM
wow this is just purely amazing!!!!
congrats again!

ckool
02-07-2009, 08:33 PM
what a perfect run!! Good job!

YBOOST
02-07-2009, 08:56 PM
thanks mate. still dont know how the little beast pulled that number!

INVSBL
02-07-2009, 08:57 PM
1337 driving skills + awesome set up = results!

EG5
02-07-2009, 09:01 PM
heres the new PB...
http://www.youtube.com/watch?v=p2Sc5O-vhBg

:thumbsup::thumbsup:

Behtec_JunKIE
02-07-2009, 09:49 PM
thanks mate. still dont know how the little beast pulled that number!


haha must be the pubic hair around ur face bro given u good luck LOL

EG CIVIC
03-07-2009, 01:01 PM
Congrats on the new PB:thumbsup:

antO
03-07-2009, 01:43 PM
TOO FAST... Great job, hard work has surely paid off.

jords
03-07-2009, 01:46 PM
I was there at WSID on wedneday, nice smooth run. The gear changes were perfect. well done.

YBOOST
03-07-2009, 03:38 PM
haha must be the pubic hair around ur face bro given u good luck LOL

the beard is gettin pretty long hey! should shave it for weight reduction lol

SHW.70Y
04-07-2009, 01:04 AM
nice work !