markCivicVti
16-04-2009, 08:24 PM
Firstly, the kit I have doesn't use the stalk, so it's not what honda australia uses, instead it uses a button, similarly to the accent lighting kit.
The front half is already done and the wiring is straight forward, but now I have a harness for the dash/fuse box that I just can't figure out and the Honda Australia install manual that I found isn't very useful as it covers the install for the stalk which uses a different harness.
This is the harness and the switch button:
http://a0.vox.com/6a00fad697b9e800040110163f3528860c-500pi
The black box lookin thing on the right appears to have a fuse inside.
This is the bottom half of the fuse box.
http://a1.vox.com/6a00fad697b9e800040110163f3859860c-500pi
This is the top half of the fuse box:
http://a2.vox.com/6a00fad697b9e80004011015fa6f8a860b-500pi
Has anyone installed a kit with the same (or similar) harness to the first picture? The gray plug goes into the back of the switch. The blue plug looks just like what my accent lighting (as installed pre-delivery) plug as seen on the second picture. And then there's a 1-pin brown plug which I'm guessing probably also needs a home. Obviously the metal ring is the ground..
I'm feeling pretty lost at the moment and hope someone here has done this before or has a good idea of how these things work...
Thanks for helping.
The front half is already done and the wiring is straight forward, but now I have a harness for the dash/fuse box that I just can't figure out and the Honda Australia install manual that I found isn't very useful as it covers the install for the stalk which uses a different harness.
This is the harness and the switch button:
http://a0.vox.com/6a00fad697b9e800040110163f3528860c-500pi
The black box lookin thing on the right appears to have a fuse inside.
This is the bottom half of the fuse box.
http://a1.vox.com/6a00fad697b9e800040110163f3859860c-500pi
This is the top half of the fuse box:
http://a2.vox.com/6a00fad697b9e80004011015fa6f8a860b-500pi
Has anyone installed a kit with the same (or similar) harness to the first picture? The gray plug goes into the back of the switch. The blue plug looks just like what my accent lighting (as installed pre-delivery) plug as seen on the second picture. And then there's a 1-pin brown plug which I'm guessing probably also needs a home. Obviously the metal ring is the ground..
I'm feeling pretty lost at the moment and hope someone here has done this before or has a good idea of how these things work...
Thanks for helping.