DIY: Adjusting your headlights

[turtle187]

Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!


Aim:adjusting your headlights so it doesnt blind other drivers
Required:Phillips screwdriver
NOTE: if you want this dont quickly use a drill =D and have ur car lights pointed at the wall approximately 10metres
quick and easy to do

Found this DIY and thought it would be helpful for any1 who doesnt know how to adjust the HIDS or standard lights to avoid blinding other drivers

http://www.honda-tech.com/showthread.php?t=2086368

Here are the directions for the 1996 to 2000 Civics.http://img134.imageshack.us/img134/5324/headlight1.jpg
http://img118.imageshack.us/img118/2477/headlight2.jpg
http://img134.imageshack.us/img134/1424/headlight3.jpg

[beeza]

Yeah,nice one.It's a simple thing but most often neglected to the expense of the driver being blinded in front.Very annoying.

[turtle187]

yeap correct, usually happens when ppl install HIDS on there ek's or em's
thats y got this one up

[eeKayFouR]

hey have you done this to your car yet turtle? Now I'm keen for some HID's :p

[turtle187]

hey have you done this to your car yet turtle? Now I'm keen for some HID's :p


HI eekay four
yeah i have done this to my car but did it at night with a drill that has a phillips head =)
alot faster that way and u can see the major difference of where u lights are pointing
lights are still pretty bright but they dont point at other drivers in there mirrors,
this is great for ppl that have consideration for other drivers :thumbsup: