PDA

View Full Version : da9 fuses



Burley
24-04-2009, 07:37 PM
hey all. got the integra back from the mechanic today and the power windows wont wind down...even no sound from winder motor. could this be a fuse.? how do i even tell what fuse is wat...the fuse panel isnt even english

CRXer
24-04-2009, 09:01 PM
there should be a 20A fuse for each window in the under dash fusebox,if its like my '91 crx they will be in a seperate holder clipped to the side of the fusebox.

it would be a big coincidence for both fuses to blow,so that suggests it is more a power window relay problem,again going off the crx,the relay ics clipped to the back of the fuse box.

what did the mechanic work on,perhaps this could give a better idea of what happened & where to start tracing the fault?

Burley
24-04-2009, 09:27 PM
sorry but how do i get the the relay ics??? unscrew fuse box??

sorry should have explained...tie rod end was replaced, took them 2 weeks to do that and rego check....its still running like crap like revs going up and down...

CRXer
24-04-2009, 11:05 PM
like i said,im assuming the DA9 is similar to the ED CRX,so if u look at the back of the fusebox from underneath(no need to unscrew it),u will see 2 small black boxes clipped to the back of it.

1 is the sunroof relay(if u have one),the other is the window relay.
the window relay will have a black wire amongst the 4 wires the sunroof relay wont.

if u cant find the relay there,it will be close to the fusebox somewhere.if the 2 window fuses are clipped to the side of the fusebox,just trace the white wire coming from the fuses, back to the relay.

if mechanic was chasing idle issues he could have been working anywhere,sorry that doesnt help.

Burley
26-04-2009, 06:04 PM
sorry tried looking for the window fuses but my fuse cover is not english so i cant find wat fuse is wat. there is a plug where the a relay (black box) is clipped in above the fuse box. ( i cant see wire behind as it is part of the fuse box..i thought this was the main fuel relay so i tried to solder the diode??? back as it had come unsoldered..but it has come undone again as solder didnt like to melt it just a blob of solder...could this be the window relay???

CRXer
26-04-2009, 06:29 PM
dude,sounds like even if u did find the things u wouldnt be able to fix them anyway.

either take some pics of the fuse box(front & back) & post them up here,or take it to an auto elec,or take it back to the mechanic & ask him what they did wrong to your car.