A Little Help :) Camber Kits

[NDU19E]

im about to buy the camber kit... as i have NO idea what im lookin at... a lil help would be great guys thanks

http://www.heeltoeauto.com/Ingalls-C...-pr-50000.html

http://www.heeltoeauto.com/product.php?productid=50002

[Crapdaz]

im not too sure about the front but assume because of the ball joint you can adjust it in either X(horizontal = toe) or Y(vertical = camber) axis.

The rear camberkit has 2 arms (1 shorter arm for camber, 1 longer arm for toe).

In regards to both those links. You will need 2x each one to have it fully adjustable cause the price is only for 1side.

Note: With the suspension geometry there is no need to get the front camber kit cause the only thing that gets stuffed when lowering for the front is the toe. Which still can get fixed when it's stock.

Hope this helps.
Daz

[[ IV 23 VI ]]

so expensive mate since its for each not a pair,

I have a brand new front camber kit the same style as that for sale alot cheaper than that, pm me if your interested.

Cheers

[NDU19E]

thanks guys great help :)

[doosra]

For the rear, if daz is correct and you need 2.. it's pretty cheap anyway.. cause it's only costing $230 all up at the moment..

Yo NDU19E, Dupac only purchased one of them and it seems he needs two.... and it's going to cost him more if he purchases another set and pays for postage again.. so you can possibly bundle his purchase into urs to save him the extra postage.. obviously he'll pay the difference..

For 2 x rear camber kit - $232
For an extra one bundled with shipping - $336, so he'll pay extra $104 to you..

just a suggestion..

[doosra]

im not too sure about the front but assume because of the ball joint you can adjust it in either X(horizontal = toe) or Y(vertical = camber) axis.

The rear camberkit has 2 arms (1 shorter arm for camber, 1 longer arm for toe).

In regards to both those links. You will need 2x each one to have it fully adjustable cause the price is only for 1side.

Note: With the suspension geometry there is no need to get the front camber kit cause the only thing that gets stuffed when lowering for the front is the toe. Which still can get fixed when it's stock.

Hope this helps.
Daz

Hey Daz,

With this: http://www.heeltoeauto.com/product.php?productid=50002

Is this enough to adjust the camber and not worry about the toe.. ? i was told by a tyre place that euro's already have toe adjustment and u don't need to purchase this.

[NDU19E]

oh u serious man... far... sorry dude.. i already purchased them.

If i knew earlier i would of done it, all up it cost me 232.93 with shipping and its payed for.. I can email them and arrange for the shipment through mine??

dupac....i dont mind.. i just need the order number ffrom u?

[Crapdaz]

Hey Daz,

With this: http://www.heeltoeauto.com/product.php?productid=50002

Is this enough to adjust the camber and not worry about the toe.. ? i was told by a tyre place that euro's already have toe adjustment and u don't need to purchase this.
If you buy 1 kit it will come with the toe arm, stock only has a very limited adjustment.

After lowering a bit more i was running like +8mm toe in.

So you might as well install them both while your at it and makes it easier for tyre places to adjust. Also i went to bob jane and they refused to adjust mine cause they didn't have the tools to fit into there cause the subframe blocks it.

I did mine with 2 crescent spanners. (adjustable spanners)

Doosra - the lower your car is the more toe in you will have. Best bet to get both arms installed at the same time.

More Toe = more tyre wear;
More camber = more tyre wear.

[NDU19E]

If you buy 1 kit it will come with the toe arm, stock only has a very limited adjustment.

After lowering a bit more i was running like +8mm toe in.

So you might as well install them both while your at it and makes it easier for tyre places to adjust. Also i went to bob jane and they refused to adjust mine cause they didn't have the tools to fit into there cause the subframe blocks it.

I did mine with 2 crescent spanners. (adjustable spanners)

Doosra - the lower your car is the more toe in you will have. Best bet to get both arms installed at the same time.

More Toe = more tyre wear;
More camber = more tyre wear.

Crapdaz - u keen on a photoshoot aswell lmao lol :thumbsup: we need to think of a a place?

[Crapdaz]

Sorry bud, i am parting/tearing my car apart this coming week so won't be able to make any meets.
hmmm..... where outback steakhouse is in north strathfield or something. That carpark called "bakehouse quarters" only 2hr parking.
I'm sure .QD will come with you guys.

[NDU19E]

haha fair enuf.. :) i doubt it will be anytime soon, i was thinking p6 at homebush but thats been fenced off last time i was there lmao lol

i guess when we are all ready, well do a mass photoshoot.. the more euros the better..

even with any honda - would be great fun...

[Crapdaz]

haha fair enuf.. :) i doubt it will be anytime soon, i was thinking p6 at homebush but thats been fenced off last time i was there lmao lol

i guess when we are all ready, well do a mass photoshoot.. the more euros the better..

even with any honda - would be great fun...

Hopefully i have a euro still.
yeh i posted it up months ago before mentioning P6 was fenced off and the fact they are adding boomgates/ticket machinese similiar to P1-5.
So no more meets there unless you grab a ticket.

Yeh i remember the epic euro meet where 26 euros came from the initial 13euro comfirmation so epic but too bad weather was crap.
Anyhows goodluck with planning it mate.

[NDU19E]

hahahaha stuff that... i aint payin to park.. and i bet if we did and we tried to get in, they would still bugger us off and call the security dudes with there flashing lights lol

ill make a thread and well see who has the best idea for a awesome photoshoot :)

[aaronng]

Hey Daz,

With this: http://www.heeltoeauto.com/product.php?productid=50002

Is this enough to adjust the camber and not worry about the toe.. ? i was told by a tyre place that euro's already have toe adjustment and u don't need to purchase this.

If you buy 2 sets of these (one for each side), then it will adjust camber and toe. The built in toe adjustment at the rear is very crude.

[aaronng]

If you buy 1 kit it will come with the toe arm, stock only has a very limited adjustment.
[/B]

You need 2 kits, because 1 kit will come with 2 arms of different lengths and bushing widths. You can't use one on the left and one on the right to save money.

[NDU19E]

hehe cool mate :) thanks anyways...

[Crapdaz]

You need 2 kits, because 1 kit will come with 2 arms of different lengths and bushing widths. You can't use one on the left and one on the right to save money.
Rofl thats what i meant i left the other arm out.
damn you aaron again.

[doosra]

i think ur right daz, cause i noticed on the description that it says "ONE SIDE" ..

[Crapdaz]

sorry i didn't read description.

but when i bought mine i was in the same dilemma.
so from looking @ price i know it's single sided. :p

glad i could help you DoosRAAAAAAAAAAAAAAAAAAAAAA!!

[JN7]

hey ndu19e, how did your purchase go? how long did it take to arrive? im about to purchase rear camber kit also from heeltoeauto.

[NDU19E]

DONT!!!! LOL

I got mine after nearly 2 and half months i think... was the worst...

i got them now... hopefully installing them soon

[JN7]

oh snap. lol do you know why it took so long? maybe they were out of stock

[NDU19E]

they were mate . I dont think they are ever in stock but...

they order when ordered mate..

[JN7]

oh man thats a shame. their prices on the kits are cheap. a trader here has them for 345 but not sure how fast he can get them out

[NDU19E]

yeh thats the price u pay man... cheap but its couriered by snails lol

[aaronng]

oh man thats a shame. their prices on the kits are cheap. a trader here has them for 345 but not sure how fast he can get them out

If it is not in stock, expect it to take a while to get in by sea.

If you want it fast, get it from here: http://cgi.ebay.com/ebaymotors/03-07-HONDA-ACCORD-ACURA-TL-TSX-INGALLS-REAR-CAMBER-KIT_W0QQcmdZViewItemQQ_trkparmsZ240Q3a1318Q7c301Q3 a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2em63Q2el11 77QQhashZitem3a4eac3ee6QQitemZ250428014310QQptZMot orsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

I bought mine from this seller and got it within 6 business days (was in stock).

[JN7]

hey aaron, thanks for the link. im guessing that its 159 us dollars + postage for both sides? and also it states that it has two available so i guess the have it in stock. i will send them an email.

[NDU19E]

make sure u ask mate lol

btw.. MINE ARE INSTALLED!! FINALLYYY! Thanks to Dupac.. thanks man

[Crapdaz]

make sure u ask mate lol

btw.. MINE ARE INSTALLED!! FINALLYYY! Thanks to Dupac.. thanks man
about time baller, just as baller as du right?

[JN7]

gonna bite the bullet and go with heeltoeauto. they emailed me back saying it is in stock so fingers crossed!
hey boys, is it 232 AUD?

[racerwannabe]

gonna bite the bullet and go with heeltoeauto. they emailed me back saying it is in stock so fingers crossed!
hey boys, is it 232 AUD?

Is that including shipping? If it is then it's a good price. Autocom or something on ebay charges ~$70USD for shipping + $159USD for the kit which comes to ~$280AUD..depending on the exchange rate.

[JN7]

Is that including shipping? If it is then it's a good price. Autocom or something on ebay charges ~$70USD for shipping + $159USD for the kit which comes to ~$280AUD..depending on the exchange rate.

i think heeltoeauto is 232 US dollars mate. because in brackets after it states (~$290)

[aaronng]

hey aaron, thanks for the link. im guessing that its 159 us dollars + postage for both sides? and also it states that it has two available so i guess the have it in stock. i will send them an email.

You can ask them for piece of mind. When I bought mine from that seller in early 2007, I bought 1 set and they sent me the kit for both sides, which totalled 4 pieces. Make sure you message them for a quote on shipping costs so you don't get a surprised. I can't exactly remember how much I paid, but it was about $230-250 landed.

[dupac->]

all good dean.. Thanks for ordering my other side of the camber kit :)
I wish baller darren i wouldnt be driving a euro. Haha

[JN7]

You can ask them for piece of mind. When I bought mine from that seller in early 2007, I bought 1 set and they sent me the kit for both sides, which totalled 4 pieces. Make sure you message them for a quote on shipping costs so you don't get a surprised. I can't exactly remember how much I paid, but it was about $230-250 landed.

Yep. i asked them and its a set for both sides. everything will cost me 300. Thanks again

[felixd]

u know u can get pedders camber kit :)

[JN7]

prefer ingalls. where do you get your suspension installed felix?

[felixd]

I got mine installed at my house :) inc ingalls too. I say if u wanna get them just wait for AUD getting better not worth it yet

[JN7]

who did it for you? i already ordered it

[felixd]

oh ahaha i did it myself LOL :) its not hard just time consuming and i only have normal tools.

[JN7]

oh ahaha i did it myself LOL :) its not hard just time consuming and i only have normal tools.

Come do mine! please

[felixd]

woot u want me to install the ingalls ?

[JN7]

yeah. Who did your coils?

[dupac->]

everythings pretty easy to install JN7.

coils are abit more tricky having to take off the parcel shelf at the back.

the camber kit you only need 17mm and 14mm socket with ratchet or even better a breaker bar.

and a 14mm and 17mm spanner
4 bolts each side

bam and its on dude.

lol

[JN7]

:( i am very poor at diys. very.

[dupac->]

lol thats what i used to say
learn from ur mistakes bro
aahha

[JN7]

lol, haha i think im incapable of doing diys such as coils + camber kit.

bloody ended up paying 310 AUD for it off that ebay link

[Jonno5454]

lol, haha i think im incapable of doing diys such as coils + camber kit.

bloody ended up paying 310 AUD for it off that ebay link


how long did you have to wait for it ??

[JN7]

how long did you have to wait for it ??

well my cousin is doing paypal for me (i had to transfer money and it takes 3-4 days to clear into her paypal account) but if you minus that.. it should take around 5 working days.

i'll let ya know how long it takes once it's been cleared and received

[Crapdaz]

ebay = to receive product
7-10days for a fast shipment
11-20days for a normal shipment
20+ = slowass...

NOTE: Working days.

[NDU19E]

there working days is when they wanna work, its considered as a working day lol ...

[JN7]

anyone in melb wanna help me install my camber kit? shout you dinner/lunch :)

[NDU19E]

lol are you trying to find a soulmate? :P

its not hard.. after watching du.. just need patience... give it a go, just two bolts on either end.. :)

[JN7]

lol maybe. haha im like very very tempted to go get my coils installed professionally and just get a backyard job on the camber kit. got any instructions?
and whats the go with adjusting the kit? i am a lost cause at this stuff

[NDU19E]

best thing to do mate is to youtube it.. youll fidn anything on there.

when it comes to the camber kit, best to install it yourself and then just have the pro's set up the camber and degree..

when installing the coils, it will take alittle more so its better to get sombody to instal them... which means you might aswell pay sombody to do it professionaly lol

[JN7]

i just got quoted 330 for coils install.
with camber kit, i might just get my friend whose done his own one on his euro and just get it adjusted from a shop like you said. have you adjusted yours? how much did you pay?

[NDU19E]

i had mine adjusted. I did the lowering first and they dialed the camber.

cost me 70 bucks with front and rear alignment

[JN7]

that looks tops. im thinking of putting back on my stocks on my 06.
ill call places tomorrow for installation

[aaronng]

lol maybe. haha im like very very tempted to go get my coils installed professionally and just get a backyard job on the camber kit. got any instructions?
and whats the go with adjusting the kit? i am a lost cause at this stuff

If they are installing coils for you, ask them to install the camber kit at the same time. Shouldn't cost much more since the car is already on the hoist.

[JN7]

yeah but i havent got the camber kit yet. i might just wait it out. Paypal still hasnt cleared my transfer yet.

[Crapdaz]

yeh wait it out and do them at the same time.

[JN7]

:( hate having the coils here staring at me.
the money still hasnt even cleared yet! boo

[racerwannabe]

:( hate having the coils here staring at me.
the money still hasnt even cleared yet! boo

thats strange. i paid for mine yesterday and it's been sent already.

[aaronng]

Did you make sure that you had enough money in your bank account and that it was verified?

[JN7]

its gone through. now the wait continues. would i have a lot of camber lowered on 19s?

[Crapdaz]

paypal takes around 3days to clear...

19" depends on how low you would set it.
My 18" dropped 2" gave me around -3 to -4 deg camber and toe was out by almost 8mm each side.

[JN7]

im not gonna have it too low. got a screwed up driveway.

[Crapdaz]

im not gonna have it too low. got a screwed up driveway.
do you have oem kit? or stock nothing?
lipkit + lowered = fail too even if you don't lower too much.

[JN7]

lip kit. me and my old man measured how clearance is for the car driving up the driveway, seems okay

[Crapdaz]

lip kit. me and my old man measured how clearance is for the car driving up the driveway, seems okay
what's the clearance (lowest point) on your driveway?

NOTE: sorry guys for being a bit off topic.

[felixd]

hmm look buddyclub n+ on the lowest setting with modullo front kit with 18" measured to be abt 5cm off the ground :0

[JN7]

i dont understand your question daz

[Crapdaz]

okay if your driveway is stuffed.
the driveway might concave up or down if not flat.

when you reach the point of where the driveway points down and elevates back onto the gutter that would be your worst point of contact to your lipkit.

With me trying to go straight(reversing) onto my driveway i start scrapping once my rear wheels start going up the driveway.

Assuming you don't set the coilovers too low i would assume you'd be able to get into the driveway at a suitable height without doing ANGLE (might not have a neighbours driveway next door)!


hmm look buddyclub n+ on the lowest setting with modullo front kit with 18" measured to be abt 5cm off the ground :0
yeh sounds about right, but what i am asking is the lowest height NOW when he enters and exits the driveway (from ground to lip clearance).

[racerwannabe]

i would highly recommend purchasing this kit from import auto. i paid on tuesday and received it today!! man thats de fastest shipping ever.