brake questions again:) pic inside

[civicVI]

brake questions again
how to take out that thing in the middle:confused:
use air gun still cant take it out:(
http://i114.photobucket.com/albums/n244/civicVI/DSC00071-1.jpg

[civicVI]

may be the problem from there
http://i114.photobucket.com/albums/n244/civicVI/DSC000711.jpg

[shadou]

you must have a weak ass rattle gun, yea that is the main problem for weak ass rattle guns :p you need to get something in there to make that little indent straight for the rattle gun to be able to take it off properly, usually a hammer and a small flat head screw driver/chisel whatever you have around that fits in the flat headed.

[mocchi]

straighten out the indentation so the hub nut can spin, i undid mine with a screwdriver, then crack it up with a breaker bar, the long breaker bar.
it made a loud 'crack' sound. if you hear the crack sound it means you've loosen it up.

to torque it back up: 181nm/18.5kgfm/134lb-ft
and don;t forget to indent the tab again.

[civicVI]

ok guys i did get something in there to make that little indent straight then try to use air gun to take that thing out but still cant
whats wong with it?
do u guys think i need to use the long breaker bar loosen it?
because i really think air guy should be more powerful then the the long breaker bar

[Red_EG4]

ok guys i did get something in there to make that little indent straight then try to use air gun to take that thing out but still cant
whats wong with it?
do u guys think i need to use the long breaker bar loosen it?
because i really think air guy should be more powerful then the the long breaker bar

using a breaker bar is more effective for breaking the seal
the rattle gun just removes it faster