PDA

View Full Version : HID problem =O



ig3o
05-05-2009, 03:50 PM
when i turn on my lights.. the driver side HID blinks for about 5 seconds and stays off.. i've turned it on and off like 10 times and the problem keeps reoccuring.. i dont think the bulb is busted cause its still blinking.. i checked all the wires and they're still intacted.. any ideas?

turtle187
05-05-2009, 03:53 PM
when i turn on my lights.. the driver side HID blinks for about 5 seconds and stays off.. i've turned it on and off like 10 times and the problem keeps reoccuring.. i dont think the bulb is busted cause its still blinking.. i checked all the wires and they're still intacted.. any ideas?

if there aftermarket HIDS,
start your car,
dont just hav the reds on buh turn on the engine
then try turning ur hids on

ig3o
05-05-2009, 04:32 PM
if there aftermarket HIDS,
start your car,
dont just hav the reds on buh turn on the engine
then try turning ur hids on

yea ive tried that too.. still didnt work =(

power_of_dreams
05-05-2009, 04:36 PM
swap the ballasts and see if it changes anything

turtle187
05-05-2009, 04:39 PM
not too sure then mate,
best bet is to swap the ballast around like the dude above me suggested

ksl
05-05-2009, 08:57 PM
Actually there is a high chance of the bulb, it seems the bulb is start to dying.

Cause this happen to me, first, the bulb will need switch 2 times to get it on, and later, the bulb just on for few second. Take the bulb out, the middle of the hid tube, where there is a little ball, if it turning into black, the bulb is start to dying.

If you want to test is it the bulb or the ballast, just switch around, use the bulb on the other ballast, than you will know what cause it.

EK1.6LCIV
05-05-2009, 09:25 PM
yea my hid kit is starting to do the same problem, my driver headlight wont come on

ffs, going back to normal bulbs 2moro, hardly worth the effort for hids lol

VTECMACHINE
05-05-2009, 10:39 PM
I'm sure it's the ballast.

CRXDEL501
05-05-2009, 10:47 PM
with my first set i had similar problem. it was the ballast.
but of course if its not the ballast it would be the bulb.
change bulb, get new ballast, or a new set all together.

EK1.6LCIV
06-05-2009, 07:08 AM
yea not a chance Im wasting more time on the hid setup, just gong back to conventional halogen bulbs with trouble free operation :D

CRXDEL501
06-05-2009, 08:55 AM
where did you get your hids ryan? coz i havent had any troubles with my current ones.
dont go back to halogen bulbs haha.

EK1.6LCIV
06-05-2009, 09:50 AM
Im going back as of 5pm this arvo, lol

got bulbs on hold at the shop near work ready for pickup

made by phillips, absolute garbage, I reckon they have under rated something in the drivers ballast, something Im not going to look at as its a waste of time/more money

ig3o
07-05-2009, 01:43 AM
lol yea i think im gonna get a new set.. which would be a good and reliable? sumthing in bewtween $250 - $400

sleeper
07-05-2009, 01:58 AM
mtec or mu secret with that budget. or ebay and save some money.

CRXDEL501
07-05-2009, 09:26 AM
mtec or mu secret with that budget. or ebay and save some money.

Mine are from musecret and I'm happy with them

dtngo
07-05-2009, 11:01 AM
OP, switch the LHS and RHS bulbs around and see if the problem continues. If the LHS starts blinking then it'll be the globes.