Dc2R clutch problem

[jetdc2R]

hey people

got a problem with my clutch

i bleed it all everythings fine clutch feels normal the, leaver on the front of the gearbox connected to the pressure plate moves all fine.

problem:
*wen car is on i get no gears in feels like the clutch is still engaged

wen car is off i get the gears in as with any car anyway

just give me suggestions on wat it could be?

do i need to pull my gearbox out and get new clutch kit??

cheers

[B18cEG]

could you make a little more sense please, maybe re-word

Thanks

[Mikecivic78]

Let me confirm something. Was the clutch fine before you bled it?

[OMG.JAI xD]

Its probably not moving enough mate.

Check under your dash for evident leaks from the master cylinder.
Or you might have internal failure of the slave.

Either one of those will give you loss of pedal.

And when you say "normal" Its probably because your foot adapted to it over time.
Change to another dc2r with perfect clutch and youll feel a difference.
Same thing when i had my civic and teggie.
Civic had a leaking master. No pedal. Had gears though, cause it wasnt as bad.

After you bled it, youre getting perfect clutch. But after testing etc etc, and by the time you started the car, you wouldve lost the pedal again due to sucking in air.


Im not too sure, cause youre description wasnt worded very well. But Im only taking an assumption. My mate had a teggie with leaking master. Crunched if shifting quick.
Leaking in system = less pressure = loss of pedal = less clutch travel.

Hoped it helped =]

[Wace]

yeh i would say its either the master or slave cylindr sins bleedin it didnt help, get em checked out, had something similar happen to me but mine just needed some bleeding n it was fine

[jetdc2R]

hey guys i found out the problem my clutch is fine but apparently my gears moved over some how and need to be alligned

weird