View Full Version : Intake Resonator -> High idle?
Scott.QQ
08-05-2009, 06:03 PM
Hi all.
I recently removed the intake resonator on my 00' EK . This is the one that guides unfiltered air to the filter.
After which, my car now idles 200 revs higher.
It has gone from 550 ± 50 when warm to 750 ± 50
Is there any need for concern? Might it be running lean?
Thanks in advance.
akusuma
08-05-2009, 06:09 PM
try resetting the ecu? disconnect and reconnect the battery
Scott.QQ
08-05-2009, 06:11 PM
ah, sorry. Forgot to mention
I tried resetting the ecu. I pulled two fuses out. The top 2 left hand corner ones 15 and 7.5. Left out for 5 mins. Then popped back in and let it idle for 10.
Ecu should be reset? I know I now need the code for my stock radio.
dudeling7
08-05-2009, 06:33 PM
it should idle at around 750 rpm when warm...i think 550 is a bit low to be idling.....the fuses you pull i think is called like radio backup or somethign....
fitvpower
08-05-2009, 06:41 PM
wat rpm should be the car idling? mine is at 1000rpm
dudeling7
08-05-2009, 06:51 PM
if you pop ur bonnet on the sticker it should tell you the ideal idle speed
MWAKU
08-05-2009, 06:53 PM
meh, mine idles around 750 aswell, when cold, it idles at like 1250 (so it warms up faster)...i don't think you should fear tho...
NSPYRE
08-05-2009, 07:03 PM
it should idle at around 750 rpm when warm...i think 550 is a bit low to be idling.....
wat he said :thumbsup:
Scott.QQ
08-05-2009, 07:21 PM
Thanks everyone :)
unity
09-05-2009, 03:58 PM
Get a friend or someone else that has a scan program and they can get an accurate idle for you. You will also be able to measure your air to fuel ratio.
Here are 2 screen shots I have taken with a new program I got last week. There are a numerous variables that you can test for.
http://i635.photobucket.com/albums/uu71/unity_aus/screen1.jpg
http://i635.photobucket.com/albums/uu71/unity_aus/screen2.jpg
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.