Extractors

[danny_2132]

Is $640 for 4-2-1 xforce extractors and $670 for 4-1 xforce extractors a good deal? the price includes installation.

[aussiemale]

They are good for bucks mate !

[ksl]

try to search through the trader on here, properly they can do better price

[IZY-10]

for that price you can go 5zigen which are a middle class header. Xforce is usually on the lower part of the scale

[GSi_PSi]

get try-y headers.... some sellers on here selling for cheaper than that. xforce is apprently found to be worse than stock ITR headers

[locote]

In par with my Sir-G teg casty to be exact...

[danny_2132]

ok s o i can get the same xforce ones for $400 so the guys chargin me 270 to install them

how much would it cost to install extractors?

[VTECMACHINE]

$50-$100 from Touge Tune.

[CRXDEL501]

do a search before you buy.

[GSi_PSi]

its pretty staight forward, if u can do an oil change, you can change your extractors.

[danny_2132]

jdm = 950
xforce = 400
skunk2 = 440

installd
xforce = 650


wheres Touge Tune located at?

[danny_2132]

would these of ebay be any good?

http://cgi.ebay.com.au/94-95-96-97-01-HONDA-INTEGRA-B18-VTEC-HEADER-EXTRACTOR_W0QQitemZ370200200631QQcmdZViewItemQQptZ AU_Car_Parts_Accessories?hash=item370200200631&_trksid=p3911.c0.m14&_trkparms=66%3A4%7C65%3A1%7C39%3A1%7C240%3A1318%7C 301%3A1%7C293%3A1%7C294%3A200#ebayphotohosting

[ksl]

better go with good brand extractors,

[Neesmo31]

I havn't seen 5Zigen headers that cheap before, but thats a really good price. You say skunk2 headers are 400 am i correct? Thats would be an awesome price.

I have been looking at dumperking headers for my DC2R

http://www.dkne.com.au/honda-integra-stepup-extractors-p-417.html

But if i could go 5Zigen or skunk i would. Does anyone know where i could order these headers from?

Its also interesting that the xforce headers have been commented to be worse than stock.

Cheers.

[Neesmo31]

Nengun do 5zigen headers for round $600

http://www.nengun.com/5zigen/pro-racer-header

Something to think about.

[aaronng]

Nengun do 5zigen headers for round $600

http://www.nengun.com/5zigen/pro-racer-header

Something to think about.

No, $675 does not include shipping. When shipping is factored it, the price is $931 landed.

[Neesmo31]

Hmm good ol shipping - catches everyone out. Im pretty keen on those dumperking ones, they seem to be nicely fabricated, a bit of heat wrap and off you go.

[IZY-10]

save your money go toda mate. The most power gain you will gain from boltons for a dc2r are the headers

[chucks]

save your money go toda mate. The most power gain you will gain from boltons for a dc2r are the headers

I agree with IZY, save ur money and go toda, mate... the gains are well worth the price. (Recently saw a set of toda's on WAhonda for $1300, really good price).

Extractors IMO are really important on a NA engine. Those generic headers and copies out on ebay might not have a good fit and might hang low like mugen ones causing scrapes on a lowered ride. Toda on the other hand has excellent ground clearance and will not scrape, unless ur ride is really low, but i dun think it ever will (never heard of anyone scraping it yet). another plus about toda is that it is really lightweight compared to the JDM 4-1 header, which is another bang for the buck extractor.

Hope that helps

[Rehaan Khan]

for that price you can go 5zigen which are a middle class header. Xforce is usually on the lower part of the scale

yeh tru lol

[Wace]

save your money go toda mate. The most power gain you will gain from boltons for a dc2r are the headers

very true, got some on my dc2 noticed a big difference

[aaronrein]

I have a 94 teg vti-r. I've just been loookin into changing the header to a ITR header as i can get it reasonably cheap and i also have a magnaflow muffler to chuck on..
but im unsure n wanderin if anyone knows if itll cause problems to the balance of the system? and if not wat the gain would be like?
ppl have been tellin me both yes and no so im in a puzzle...
im mainly just after a deeper sound.

thanks