Suggestion's to modify or sell. .Input Appreciatted!

[vtec_jet]

I currently still own my CK Vti-L Accord, and recently been contemplating selling it and picking up something new, however it is my pride and joy and it's just such a nice car.

So i'm thinking if i keep it, i really would like to convert to H22A or similiar just for more power and reliability. I have also considered Turbo conversion, however the transmission would probably not hold up.

Does anyone know if this has been done in this model of accord? or am i just wasting my time ?

Here are some pics just to update what my car is looking like at the moment.

Cheers guys :thumbsup:

http://img4.imageshack.us/img4/2136/28766853354675451993675.jpg (http://img4.imageshack.us/my.php?image=28766853354675451993675.jpg)

http://img11.imageshack.us/img11/165/28766853351175451993675.jpg (http://img11.imageshack.us/my.php?image=28766853351175451993675.jpg)

http://img9.imageshack.us/img9/7030/28766853352675451993675.jpg (http://img9.imageshack.us/my.php?image=28766853352675451993675.jpg)

http://img9.imageshack.us/img9/7758/47161204.jpg (http://img9.imageshack.us/my.php?image=47161204.jpg)

[skyflyer]

its not a waste of time. accord is a good base to start modding. however being in aus makes it a lil harder as parts are hard to come by... well at least not as much as in the US. and they're not all popular here...

if i were you, i'll sell it, and change it to cd5/cd6 accord. cheers.

[tmy]

It depends what your into mate. If you want to be an individual, modify your current car. Dealing with the fact that parts are harder to come by. That's the option I would take.

A turbod Ck would be very unique. Probable a lot of hassles and drama but in the end it would all be worth it.

Going by the posted pictures, your car is already beautiful!

[yiannixanthos]

agree with skyflyer!

[vtec_jet]

Yeah, coming across parts are so difficult, which is why it makes my decision even harder.

If i sell it, i might go to either an s2ooo or 7th Gen Accord, i've been having a look at some of the threads and there seems to be a few around, and the interior of the 7th Gen is mint! But ofcourse that's not easy as you need much more money for another car !

Turbo CK accord would definetly come with a few headaches which i would like to avoid.

I've done a bit of searching and i can't seem to find any traders/dealers/shops which stock anything for this model accord. If any has seen or heard something please feel free to mention it here.

Thanks for your input so far guys. .

[Jarkz]

http://www.raceinspired.com/

Sell quite a few items for you CK.

[vtec_jet]

Thanks Jarkz.

Is there anything in Australia at all guys ? And have anyone actually bought anything from this website before? Reliability and trust is imporatant when spending so much money these days.

I've noticed a few CG and CK owners around here, not sure how many actually modify.

[RiceMeister]

Hey Jet,
I've got a CK accord too, 2000 V6L in satin silver. cant tell from pics, but yours is the silver too?

your VTI-L looks really clean man, simple, sleek wheels and the car colour match really well, that's the way these accords look best i reckon, low and luxurious !

what size tyres/rims you running? stock springs or kings/coils?

I haven't done too much modifying yet, just added sub, amp, head-unit, CAI, exhaust tips and just yesterday added some new rims. staggered offset, 18x8 up front and 19x8 in the back. rolling my guards on wednesday too, scrub is not fun! apart from that i haven't modified much further. probably only going to add a new catback at the end of the year....there is quite a bit you can do on these though...

oh and back on topic...definitely keep and modify man. That's why i like the CK accords, they're a bit different as no one really modifies them that often like other models. Bit more unique and makes modifying them a bit more special, especially sourcing hard to find kit!

throw up some more pics man...

[vtec_jet]

hey bud,

thanks for the comments.

The current rims i have are 18x7.5 all round, car is quiet low on compressed King's + Koni Shocks. i can't have anything bigger unless i roll my guards.

A few other mods here and there, my car has been through a few different mods, im sure you will find some pics around the forums here.

I'll post some more pics and details soon.

Throw up some pics of your car, sounds interesting so far.

Are you looking at any other mods besides the cat? Where are you getting your parts from mate?

[RiceMeister]

yeah man, i've got the same issue. because i went for 18x8 and the 19s on the back ive got to roll my guards on the rear cause they scrub quite a bit, even in normal driving when I hit a bump...so thats an urgent fix for next week!

I'll throw some pics up this afternoon, going to take some shots of my new setup soon.

in terms of parts...i was looking at the magnaflow catback for my 6cyl off ebay or through the melbourne importers of magnaflow.

http://www.mvpautoparts.com/images/magnaflow/15640.jpg

from what I've read its a nice system, not over the top with volume, but pushes out a nice low tone. still getting it shipped here including taxes etc...is going to be around $1100.

in terms of other mods: im just going to do some small things i think, re-badging, new tint, front sway bar, clean the engine bay up with some new spark plugs and perhaps new shocks and springs as im currently running pedders lowered and they're getting a bit old...lost their stiffness a bit although the ride height is really good.

have you had any problems with your kings and konis man? in terms of scrub and so forth..?

[FAT VTI]

get rid of it, and get urself a cd5.
reason- Easier to get parts, easier conversion (h22a), better turbo potential if u stick with f22b1, looks better, built to last, cheaper to buy.

[Riviera]

very nice car i quite like em but all depends what your after...

if its turbo or supercharge app, id sell bro... before the gearbox dies anyways...
turboing would be kool but the gearbox is no stronger than a CD5 GB...
with that extra torque as it is, they fail...

if VIP/cruiser, keep it, or get the later model theyre awesome in VIP mode
plenty of inspirational pics out there too ;)

[CB7_OWNER]

Wow!! love the way your accord sits at the moment.. be one of few or first owners of your generation to do a h22a swap in aust =)

[vtec_jet]

Rice Meister - I havn't had any problems with my koni's or kings, however if i had a choice i would probably have spent a bit more and bought some coilovers, but at the time i didn't have the money, if i sell this set then i'll def get some coilovers.

FAT VTI - I've thought about it, but not really interested in Downgrading, and i'm not a huge fan of the CD5 shape or interior. The CK is much more comfortable and roomy inside as well. I would really be interested in doing something different that'll last. I don't seem to see anyone attempting to do anything major with the CK in Aus either.

Riviera - yeah i'm tempted to go later model, but i'm looking for black with low k's and leather .

[aaron182]

tidy rig mate, although its tough to be the CD5 as alot of people are saying, maybe im bias by owning one myself.

dont have any real suggestions, but please dont over do it if you do mod the exterior ahha, slean and simple i say

[RiceMeister]

Jet, here are some pics of my CK1.

Current Mods:
- CAI
- Alpine iPod Head Unit
- Clarion mono block and JBL sub
- Exhaust tips
- Advanti 19x8 Rims and Kumho tyres...

going for VIP style once i get more funds together for some more body parts and new exhaust.

pics...
http://photos-f.ak.fbcdn.net/hphotos-ak-snc1/hs007.snc1/2849_77540309149_637759149_1821437_3738828_n.jpg
http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs020.snc1/4242_82447529149_637759149_1885260_1438681_n.jpg
http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs020.snc1/4242_82447524149_637759149_1885259_3254001_n.jpg
http://photos-f.ak.fbcdn.net/hphotos-ak-snc1/hs020.snc1/4242_82447534149_637759149_1885261_3918418_n.jpg
http://photos-g.ak.fbcdn.net/photos-ak-snc1/v1143/108/80/637759149/n637759149_1214630_3752.jpg

there's a lot you can do to the CK's!

[vtec_jet]

haha, don't worry mate, i've already been through the whole "over modding"

If you squiz through the forums, you'll see in the past i've over done it, and i'm a big fan of clean and simple.

[vtec_jet]

woahh man. . nice and clean . .

Just needs a minor drop, its looking pretty good man.

[RiceMeister]

cheers man, currently got some scrub on the back 19's so getting guards rolled in 2 days to fix that up...once thats done im probably going to change the old pedders lowered springs to some kings and maybe some new shocks too later down the track.

just want it a little bit lower and it'll be poppin just how i want!

you got a stock exhaust on urs man? or you added aftermarket?

[vtec_jet]

there's is such a big gap and it still scrubs, damn..

Before you make any rash decision's, just really have a look around at suspension, you want the best product at the best price so dont rush it.

I've currently got a full 2.25 exhaust system. 4-2-1 header, high flow cat, nothing too extreme, just nice tone and simple system.

I'm looking to possibly upgrade the exhaust system if possible, i found a full turbo kit from a supplier in S.A, it's going to cost me around $4000 - $5000 just for the kit, plus much more which i don't think i want to go to if i know my transmission is going to die.

[vipaccord]

hey rice meister i have a cg with the same wheels and lowered on tein super street i have 1 finger gap front and rear and i had to even pull the front guards out and relocate the rear screw for the bumper and trip the bumper and inside the wheel well.

[vtec_jet]

Feel free to put up some pics vipaccord , would be interesting to see diffrent mods and styles.

i would really love a simple body kit or lip kit . . so hard to find !

[Jarkz]

i would really love a simple body kit or lip kit . . so hard to find !

+1

Lip kit & racey rims suits these just as well imo.

http://aycu16.webshots.com/image/48455/2002377203967256602_rs.jpg
http://aycu12.webshots.com/image/48691/2001015687001770880_rs.jpg

[RiceMeister]

damnn!!! thats dope.


whereabouts can we find lip kits like that?

clean, simple and ballin as f**k!

[Jarkz]

ebay US, for mugen above pic

http://cgi.ebay.com/ebaymotors/98-00-99-Accord-2-DR-COUPE-Mugen-front-Lip-ABS-PLASTIC_W0QQitemZ120421057729QQcmdZViewItemQQptZMo tors_Car_Truck_Parts_Accessories?hash=item1c09a784 c1&_trksid=p4506.c0.m245&_trkparms=72%3A1171|65%3A12|39%3A1|240%3A1318 (http://cgi.ebay.com/ebaymotors/98-00-99-Accord-2-DR-COUPE-Mugen-front-Lip-ABS-PLASTIC_W0QQitemZ120421057729QQcmdZViewItemQQptZMo tors_Car_Truck_Parts_Accessories?hash=item1c09a784 c1&_trksid=p4506.c0.m245&_trkparms=72%3A1171|65%3A12|39%3A1|240%3A1318)

and same with type r style.

http://cgi.ebay.com/ebaymotors/98-00-99-Accord-2dr-Type-R-Front-Lip-Kit-ABS-Plastic_W0QQitemZ380121996441QQcmdZViewItemQQptZMo tors_Car_Truck_Parts_Accessories?hash=item5881095c 99&_trksid=p4506.c0.m245&_trkparms=72%3A1171|65%3A12|39%3A1|240%3A1318

[RiceMeister]

Cheers Jarkz ;)

[vtec_jet]

Thats exactly what i've been looking for, but so difficult to obtain.

hrmm ebay huh. .

[SiReal]

sell it and buy something manual/tiptronic. I thought my accord was my pride and joy until it became the most boring thing to drive.

get a euro i suggest

no wait, keep it so u can buy my neuspeed springs hahaha

[Type R Positive]

Why not upgrade to an Accord Euro?
CL9 luxury's are cheap as chips now, and are a real bargain!

They are fully loaded with features, and frankly, they are a way better car to start with.

[vtec_jet]

Jeff - I'm always looking forward to you input ! haha . .

Type R - I've thought about a Euro for a while, but also the 7th Gen's are quiet hot.

Might have to compare the two !

[vipaccord]

hi heres pic of my car.i cant afford a euro because im building a new house.

http://img12.imageshack.us/img12/1246/dsc01119s.jpg
By hotrod79 (http://profile.imageshack.us/user/hotrod79), shot with DSC-W1 (http://profile.imageshack.us/camerabuy.php?model=DSC-W1&make=SONY) at 2009-05-29

[vtec_jet]

Hey very nice mate !!

Nice and tasteful!

Anymore pics of the front and interior?

What mods have you done ?

[vipaccord]

mods are
tein ss coilovers
,19 inch mags,
2 x twin tip mufflers,
injen cold air intake,
ultra white lowbeams,blue parkers,number place leds,blue interior door lights,ultra white led dome light
upgraded all the factory speakers,tv/dvd screen,reverse camera.
tinted windows
chrome trunk lip.
fog lights.

http://img23.imageshack.us/img23/6518/dsc01120s.jpg
By hotrod79 (http://profile.imageshack.us/user/hotrod79), shot with DSC-W1 (http://profile.imageshack.us/camerabuy.php?model=DSC-W1&make=SONY) at 2009-05-29

[vtec_jet]

Is that an aftermarket bumper or OEM ?

Any pics of the foglight installation?

[vipaccord]

its the original bumper.i dont have any pics of the install.you just cut a little of the factory bumper for the back of the fogs.

[98V6Accord]

nice cars guys, i got a CG1, no real plans to mod though jst mayb getting a pod filter off a mate, we tryed it out and sounded pretty good jst revving it in the garage, so ill get my own and see how it goes on the road. but i wouldn't turbo or supercharge, not with the gear box problems, but lowering, rims, exhaust, sound system, dvd head unit and all sounds good

[RiceMeister]

mods are
tein ss coilovers
,19 inch mags,
2 x twin tip mufflers,
injen cold air intake,
ultra white lowbeams,blue parkers,number place leds,blue interior door lights,ultra white led dome light
upgraded all the factory speakers,tv/dvd screen,reverse camera.
tinted windows
chrome trunk lip.
fog lights.

http://img23.imageshack.us/img23/6518/dsc01120s.jpg
By hotrod79 (http://profile.imageshack.us/user/hotrod79), shot with DSC-W1 (http://profile.imageshack.us/camerabuy.php?model=DSC-W1&make=SONY) at 2009-05-29

Mod list sounds great man! throw up some poor pics....I want to see how you managed with your 19's. Mine scrub on the rear a little with guards rolled...due mostly to too low profile sitting outside the guard. get some pics up with some side and interior shots! looking good from what I can see so far...fog light mod is clean.

good work :thumbsup:

[vipaccord]

what offset are your wheels? mine are +45.i also had the guards rolled plus i also cut into the rear bumper near the wheel well and cut there the screw for the bumper goes into the body and relocated that screw a little further away from the guard.also hammered inside the guard any metal that looks like sticking out.

[RiceMeister]

mine are +40 i believe man...

I've had the rears rolled, but tomorrow I'm going to cut the plastic tab joining the bumper and guard as thats the last remaining source of the problem...then going to relocate the screw..hope its not too much drama!

what did you use to remove the screw section and all that? just scissors since its plastic? or?....

[vipaccord]

i used a hack saw blade.i doubt scissors would work since is is pretty hard plastic.then all you have to so is drill a new hole for the bumper tappet screw part.hold the bumper to the panel where you want it to stay.drill though.good luck.

[Mixtapes]

get rid of it, and get urself a cd5.
reason- Easier to get parts, easier conversion (h22a), better turbo potential if u stick with f22b1, looks better, built to last, cheaper to buy.
+1 hard to get parts for your model

[vtec_jet]

i used a hack saw blade.i doubt scissors would work since is is pretty hard plastic.then all you have to so is drill a new hole for the bumper tappet screw part.hold the bumper to the panel where you want it to stay.drill though.good luck.

This is a great idea, i just inspected that little bit whee the screw sits and i'm about 1-2 mm away from the tyre, and i do want to drop the car a bit more. Do you have any photo's of this DIY ? or finished result?


+1 hard to get parts for your model

This is true, however i'm really not keen on downgrading.

I prefer to have a nice and modern interior, i think i would be spending more on the CD5 if i downgraded to make it up to the type of car i want.

Point taken though :thumbsup:

[vipaccord]

hi sorry i dont have any photos of diy and i cant take any photos of it now because a stupid truck reversed into it so its at the panel beaters.as for other people saying to get a cd5 some of us just want a nice cruiser.

[RiceMeister]

i used a hack saw blade.i doubt scissors would work since is is pretty hard plastic.then all you have to so is drill a new hole for the bumper tappet screw part.hold the bumper to the panel where you want it to stay.drill though.good luck.

cheers for the advice man, i'll be giving it a go tomorrow morning.

i've actually lost both screws as they've popped off while driving so i'll have to put together my own little nut and bolt combo...

[anthealth]

Hey guys!
I hardly ever see any 6th generation accord owners on this website that have done much to their car.
I just commented on a thread about vtec_jet wanting to fix the transmission. Something i want to do myself as well.
THat lip above is the mugen lip kit, you can get it off ebay. However, it might be not so much of a good fit.
Yes, getting parts for the 6th gen is very difficult, the result however means you just have a unique car.
Every car has their own weakness, ours is just the bloody transmission. Get that fixed up and it would be a fairly stable car.
Rice meister did you end up getting your exhaust?
Once i finish school i'm going to get rid of my accord and get myself a XR6 turbo or a SS commodore. I've always been into the bulkier meatier cars.
Here is my car by the way.
http://img9.imageshack.us/img9/731/front1phs.jpg
http://img15.imageshack.us/img15/2607/rear1s.jpg
http://img6.imageshack.us/img6/6668/sideysl.jpg

[Crapdaz]

your car is not low enuf! :p
needs some tuckage.

clean 6th gen though.

[anthealth]

thanks!
haha, yeah it's my daily driver. Clears kerbs :)

[RiceMeister]

nice ride!

what exhaust you running? quad tip?

also, what rear bumper lip is that? i couldn't agree more with your post...finding parts for our 6th gen's ain't easy! im sorting out my exhaust this week, got 2 3inch cannons im getting installed, should add a bit of grunt to the car.

[vtec_jet]

Nice Ride anthealth.

There's another 6th Gen the same colour as mine with same Euro rims as yours in Glen Waverly area.

Just an update, i've got a Mugen Front Lip and Euro-R Rear Lip to fit 6th Gen coming next week .

[anthealth]

wow.
Where did you get the rear lip? do they make euro r lips to fit the 6th gen?
p.s. Your ride looks good too.

[anthealth]

Rice meister. I've got no exhaust running.
They're only dual exhaust tips i got welded on.
Our accords aren't that fast, so i've never thought it was worth putting on an exhaust.
post up pics of your exhaust! it'd be great to see!

oh it's a modulo rear bumper for the 7th gen accord.
Someone on this forum didn't like it so i bought it off him.
It's not a direct fit about 10 cm off would you believe.
Our 6th gens have huge asses. Requires extending, metal work, fibre glass/bog.
what do you think? suits or doesnt suit the rest of the car?

I have the type r lip on the front and it goes with the factory sides. I needed something for the rear, most of the rear lips for our accords have some sort of holes in it. I don't really want my car to look racey, hence, i avoided the hole stuff.
I'm really interested in seeing how vtec_jet rear lip looks like, what the fitment will be like, and where he got it in aus. I wonder if you can get a full euro-r lip kit for our 6th gens.

Most lip kits for our accords have to imported and they're not that great of a fit neither, even the front type r lip for me was a hassle. Ill fitment.

[skyflyer]

yeah too bad we didnt get the real deal 6th generation japanese accord here in oz. in nz they did have it tho. our accord starting from 6th gen on was made in thailand except euro and except prior 6th gen. this one is the japanese euro r cl1 6th gen accord.

http://homepage2.nifty.com/yatti_/image/cl1/AUT_1454.JPG

http://i297.photobucket.com/albums/mm226/neoskyflyer/mugensir.jpg

[RiceMeister]

Nice Ride anthealth.

There's another 6th Gen the same colour as mine with same Euro rims as yours in Glen Waverly area.

Just an update, i've got a Mugen Front Lip and Euro-R Rear Lip to fit 6th Gen coming next week .

Solo!!

Details?

where did you get your euro-r rear lip? need a rear lip really bad! eBay? let us know how fitment goes...i'm keen for one.

[vtec_jet]

haha, looks like a sparked something in you guys !

Yes i sourced the Euro R Lip from e-Bay, Looked like a one off to me, since it was installed on an Accord before. I'll try get more details on the buyer, seemed to have plenty more items.

I'll Take some photos when i receive it, and also sus out the fitment, seems to fit fine from the photos, but you never know from e Bay.

I was hoping to get a full kit, but the side skirts and front lip would not fit on the Aus model 6th Gen. So i didn't want hassles.

I was going to purchase the Type R lip, but seeing as a couple of you 6th Gen Mad Dogs already have one (haha) i might go for something diffrent, so i chose the Mugen front lip.

So hopfully when its all installed i can give you guys a sneak peak and we can all go for a photo shoot as well, i'll be back in Melbourne soon enough and will be staying around Cheltenham area.

Anthony, your rear lip looks good IMO suits well, the only thing i would change is taking off the spoiler, thats just me.

Oh and just to mention there has been a lil custom work done to my car which i won't mention yet, just gona have to wait for the pics :p

[resneszz]

Hey there all,

didnt know there were a handful of 6th gen accord drivers here, haha
all ur rides look so nice, damn keen to see how that lip fits,
thought about getting off ebay so many times but herd of all the dodgy fitment, ahha

[vtec_jet]

Hey resneszz

You drive a 6th Gen? Post up some pics bud.

Yeh the dogdy fitment was always the talk of the town with eBay purchased lips, but with some grunting and mild modification, its all worth it in the end.

[CB7_OWNER]

Guys , dont mean to hijack the thread, but if you havent already join

ozaccord.com

We're trying to get that site up and running to represent accords!! =)

[vtec_jet]

i'm a member

Stop hijacking! . .bad CB7 OWNER. . badd!

[resneszz]

Hey resneszz

You drive a 6th Gen? Post up some pics bud.

Yeh the dogdy fitment was always the talk of the town with eBay purchased lips, but with some grunting and mild modification, its all worth it in the end.

ahha,

think these are a few pics taken recently haha just for fun,


http://i123.photobucket.com/albums/o298/resneszz/DSC00576.jpg
http://i123.photobucket.com/albums/o298/resneszz/DSC00575.jpg
http://i123.photobucket.com/albums/o298/resneszz/DSC00571_resize.jpg

ahha pretty much didnt do anything, parts really hard to come by >__<

[skyflyer]

Guys , dont mean to hijack the thread, but if you havent already join

ozaccord.com

We're trying to get that site up and running to represent accords!! =)

lol will join. hey do you know if that site the same as one we had last year?! i had an account on the one we had last year but probably was removed as i couldnt logon anymore...

[skyflyer]

ahha,

think these are a few pics taken recently haha just for fun,


ahha pretty much didnt do anything, parts really hard to come by >__<

my suggestion would be to replace the grille with the other oem style... the one with no middle bar... you know what i mean... if i have pic i'll post it up...

nice accord tho...

[CB7_OWNER]

lol will join. hey do you know if that site the same as one we had last year?! i had an account on the one we had last year but probably was removed as i couldnt logon anymore...

Same site, different admin this time around, we still waiting for the old mod to come back to the site haha.. soo all the old data was wiped clean, new forum, new slate, new people (i.e. me lol)

[RiceMeister]

hey resneszz nice 6th gen man. what size/offset are u sitting on? i agree parts arent easy to find, but thats something i like bout our cars.....makes one that is modded nicely something a bit special :)

looking forward to seeing the rear lip solo!

[vtec_jet]

Love the rims !

And Reps on the colour, haha. .

All it needs is lowering and some TLC and it'll b mint !

[vtec_jet]

Update : Sussing out B&M Trans Oil Cooler.

So i'll let you guys know when i get prices and fitment details, might be something i can organise for a group buy if most are interested.

[resneszz]

my suggestion would be to replace the grille with the other oem style... the one with no middle bar... you know what i mean... if i have pic i'll post it up...

nice accord tho...

ahah thank,

oh yea post up a pic interested to see what it looks like,

i was thinking about getting a lip, but dont think i can fit it, my car is too low haha, abt 5cm off the ground or so

just my tyres are too thin, looks like i got a mad wheel gap,

205/35/17 so thin =___= came with rims

[dc2dc2dc2]

sell it chief

its too old

time for an update.

[anthealth]

nice car resneszz! looks great

[vtec_jet]

my suggestion would be to replace the grille with the other oem style... the one with no middle bar... you know what i mean... if i have pic i'll post it up...

nice accord tho...


The grill of the Aus 6th Gen accord (98-00) is attached to the Bumper bar, it's all one piece.

You'd have to cut the grill and plastic weld all the holes and crap, too much work unless you own a later model 6th gen (01-02), which the grill can be seperated.

[skyflyer]

ahah thank,

oh yea post up a pic interested to see what it looks like,

i was thinking about getting a lip, but dont think i can fit it, my car is too low haha, abt 5cm off the ground or so

just my tyres are too thin, looks like i got a mad wheel gap,

205/35/17 so thin =___= came with rims

this is what i was talkin about. i think this is the best oem style 6th gen accord grille. in the country where i was from, they only had this type (malaysia accord):

http://img2.mudah.my/images/76/7607623611.jpg

cheers.

[vtec_jet]

Received my Euro - R Lip today, Its not an aftermarket Lip, its actually OEM, which surprised me !

I've left it at workshop to be sanded down, primed and resrpayed.

I trial fitted it however my muffler was in the way, so as soon as i have everything fixed and fitted i'll post up some pics !

[RiceMeister]

OEM!!:eek:

sounds killer man!

get some pics up once you've it on...

[Feverpitched]

Keep it and H22 it.

[vtec_jet]

+1

Lip kit & racey rims suits these just as well imo.

http://aycu16.webshots.com/image/48455/2002377203967256602_rs.jpg
http://aycu12.webshots.com/image/48691/2001015687001770880_rs.jpg


I'm pretty sure, thats the same lip i just bought !

Woo hoo . . haha

[resneszz]

nice car resneszz! looks great



thanks yo~ ahah

[resneszz]

Any updates?

hows the lip?

[RiceMeister]

solo?

got pics of rear lip on yet?

i found the seller you told me about, where you got yours and he has another...

i wanna see what fitment is like on yours before i pull the trigger...hope it doesnt make it hard for my exhaust to sit right!

[anthealth]

any updates on that front and rear lip?

[[ IV 23 VI ]]

oh it's a modulo rear bumper for the 7th gen accord.
Someone on this forum didn't like it so i bought it off him.
It's not a direct fit about 10 cm off would you believe.
Our 6th gens have huge asses. Requires extending, metal work, fibre glass/bog.


lol, Thats my old Modulo Rear skirt :wave:, I sold it to Anthony a while back, he is really amazing, he done all the work extending the rear lip aswell, and it came out mint! :thumbsup: