PDA

View Full Version : ASR kits


Webby_roller
16-05-2009, 11:31 PM
Hey, I am currently investigating running an ASR reinforcement and 24mm kit.

I don't quite like the idea of running both 24mm front and rear, but the kit is quite cheap and is designed to work together, so it seems like it could be a good buy.

It is going to go on an integra vtir 97...

How will running both 24mm front and rear effect handling? Make it extremely oversteer happy?

The site: http://cgi.ebay.com/ebaymotors/ASR-REAR-BRACE-SWAYBAR-KIT-24MM-CIVIC-INTEGRA-SILVER_W0QQitemZ110387589556QQcmdZViewItemQQptZMot ors_Car_Truck_Parts_Accessories?hash=item19b39cf1b 4&_trksid=p4506.c0.m245&_trkparms=72%3A1205|65%3A12|39%3A1|240%3A1318 (http://cgi.ebay.com/ebaymotors/ASR-REAR-BRACE-SWAYBAR-KIT-24MM-CIVIC-INTEGRA-SILVER_W0QQitemZ110387589556QQcmdZViewItemQQptZMot ors_Car_Truck_Parts_Accessories?hash=item19b39cf1b 4&_trksid=p4506.c0.m245&_trkparms=72%3A1205|65%3A12|39%3A1|240%3A1318)

Cheers
T-onedc2
16-05-2009, 11:48 PM
It will be more oversteery but will only be a problem if you drive incorrectly imo.

To even it out you could find a 25mm or 26mm front bar, but then I really think you're overdoing it and it may begin to affect the suspension adversely as you would want stiff springs also, but most importantly very stiff shocks to control the movement.

That's US$379 + US$35 postage, I don't think it's a good price at all as you could get a combination you actually do want for less.
Webby_roller
17-05-2009, 11:19 AM
i was thinking i would need to upgrade the front swaybar aswell... I belive JDM ITR run a 25mm front sway.. (please correct if wrong)

I was going to see how hard it would be to source one of them and then see if the total price would be worth it or not...

Its that or get the 22mm white line swaybar and ASR brace and then go from there...
ZeForce
17-05-2009, 12:42 PM
Its that or get the 22mm white line swaybar and ASR brace and then go from there...

Becareful I had a 19mm rear whiteline swaybar and it didnt line up with the ASR mounting points, ending up using a CTR rear swaybar
Webby_roller
17-05-2009, 12:48 PM
^^^ really.... was there anyway to get them to align?

Or is it easier to try and source a 22/23mm ITR swarbar?
ZeForce
17-05-2009, 12:52 PM
^^^ really.... was there anyway to get them to align?

Or is it easier to try and source a 22/23mm ITR swarbar?

I couldnt get it to line up, there were bends where the mounting points were so I ended up selling it and buying a 22mm CTR swaybar which cost me twice as much but it lined up properly and used much better endlinks as well