wut do i use 2 make the roof shiney agian?

[johnshakroo]

wuts the best shit 2 use 2 get the roof color bak 2 black?
and also how much does it cost 2 get the calipers sprayed red?

[KruZzN]

wuts the best shit 2 use 2 get the roof color bak 2 black?
and also how much does it cost 2 get the calipers sprayed red?

Just spray the calipers yourself with high temperature paint lol. or it might cost like 50 bucks a corner if you get pro shop to do it... really depends on if the shop is expensive or not.. they all vary!

with the roof... I HAVE NO IDEA!! lol :P goodluck!

[rokkuchan]

shoe shine haha...

[DNTBLO_S2k]

i think its aerospace or sumthing like that

[T-onedc2]

i think its aerospace or sumthing like that
303 Aerospace Protectant perhaps?

[vyets]

Yeap thats the good stuff
until it rains :) but then nothing is rain proof :(

[ludecrs]

Its canvas.... its inevitable.

[johnshakroo]

and where do i get this aerospace stuff from??
and kruzzn why does ur s2 look so fukn dumpd?
got myne lowerd from pedders, still not happy want it lower
is it an ugly drive? coz the bloke said he went as low as he could but 2 sitll have a comfortable drive

[ncmx5]

aerospace 303 - get from autobarn

dump it? get full coilovers with ride height adj.

[d15z1SUX]

pedders r teh gay?

[DNTBLO_S2k]

get some coilovers man, and yeh autobarn sell it, its around $ 30 only, and makes a big difference.

[JMSBND]

Yup 303 at Autobarn. Good stuff.

Coilovers to get it low, but too low and on the street you lose the "give" of sensible height and your coner speed goes down the toilet. Same with big rims. Dumped and big hoops look nice don't get me wrong but just figure out if you want the S2K for looks, or handling.

I run Eibach springs in mine, bit lower, handles good but I will go Tein Coilovers like my CRX when I need to replace the struts.

Even in my CRX track car, on 15" Buddy Clubs and Tein Coilovers dumped it looks sweet but the handling is really crap so I just pick a height that has good turn in response and lets the car absorb bumps especially mid corner.

Hope it helps.

[F20C]

john did pedders do a decent job though? im going to re-lower mine again sometime soon just havent gotten around to doing it and called up a couple places got some quotes.. a mate of mine said he would do it for 150 (cause i have the springs already) and peddars said 260 if i supply the springs.. I'm curious to know how good of a job they do though.