Beaks Swaybar Reinforcement kit ANY GOOD ??!!

[JDM-EGG]

hey guys .. i know that ASR is best product in the market for reinforcement kits, but then there's a cheaper alternative which is Beaks.

Anyone use this on EG's and have any torn out subframes ? i know that Ek's have a weaker subframe too.

was looking into buying a Beaks kit with ITR 22mm Sway bar for my eg.

neeeddd helppp whether it would be enough for daily driving , abit of National Park i guess , with stock shocks with aftermarket Springs.

cheers guys :)

[lil_foy]

Ive heard it's ok to use.
I was going to get one for my dc2 but I opted for another option.

Personally i'd prefer to be safe then sorry.

[Red_EG4]

Have look on the American forums and see what they say.
If you are only daily driving, the swaybar won't be used to its potential, and is unnecessary in my opinion. I took mine off.

[JDM-EGG]

anyone elsee ... can help me ?

[Limbo]

nope they hang too low and get hit alot especially on low cars.
Dupac (told ya so!) ripped his rear subframe when his beaks hit something on the road. ;)

ASR brace is the way to go, a subframe fix cost more than the buying an ASR

[JDM-EGG]

nope they hang too low and get hit alot especially on low cars.
Dupac (told ya so!) ripped his rear subframe when his beaks hit something on the road. ;)

ASR brace is the way to go, a subframe fix cost more than the buying an ASR


what if i just use the subframe reinforcement kit only without the beks tie bar?
or u need the tie bar to strengthen it more ?

cheers limbo for the info

[Red_EG4]

nope they hang too low and get hit alot especially on low cars.
Dupac (told ya so!) ripped his rear subframe when his beaks hit something on the road. ;)

ASR brace is the way to go, a subframe fix cost more than the buying an ASR

Technically the tiebar is not part of the Subframe Reinforcement Kit (SRK).

[JDM-EGG]

Technically the tiebar is not part of the Subframe Reinforcement Kit (SRK).

yes its not part of the kit but atleast it support the subframe too, not ur if should get it insead of the ASR ?!

anyone else uses this ??

cheers

[Red_EG4]

yes its not part of the kit but atleast it support the subframe too, not ur if should get it insead of the ASR ?!

anyone else uses this ??

cheers

yes, but just saying it isn't part of the kit, it isn't really a reason to discredit the SRK.

In this and your other thread, most people have suggested the ASR kit. You seem to disregard those suggestions and want to go with another option so now its up to you to lay out some cash.

[Sir_vtec]

Its fine. If you are thinking of buying that $40 kit from yonas... go for it. yonas ran this on his eg before with his swaybar...

Works a treat...

- Beaks kit is function.
- ASR is function and form

[Red_EG4]

This thread has some info in it.
I haven't looked through the whole thing.
http://www.ozhonda.com/forum/showthread.php?t=55786&highlight=WOE+me%2C+whiteline+swaybar+ripped+subfr ame

[JDM-EGG]

sounds like beaks sway kit is alrite to use .. will be getting it , and ill tell you guys how it is.

bang for buck i guess over the ASR ? :)

[Red_EG4]

are you getting the SRK and the Tiebar?

[T-onedc2]

sounds like beaks sway kit is alrite to use .. will be getting it , and ill tell you guys how it is.

bang for buck i guess over the ASR ? :)
I've had Beaks for a few years now with 23mm sway bar and no probs. I also have Tie bar fitted. DC has pretty much identical subframe to EG.

[JDM-EGG]

NAH not beaks tie bar, probaly gonna go some aftermarket one .. dun need bling :)

cheerrrs boys !!!

[NightKids]

How much you picking up the Beaks for? Link me up if you can... cheers

[JDM-EGG]

i got a second hand kit pretty cheap , if u want a new set, pm JDM yard.

his got them in stock.

cheers

[GIPONU]

so.... any1 tried the whiteline brace? or is that a totally different thing?

[Spoon SiRG]

Yes the Beaks swaybar kit is :thumbsup: It is good value for money on the EG/DC subframes. I would recommend running any aftermarket lower tie bar to stiffen the movement of the lower control arms with this application.

[EG5]

We ran them on our EG for circuit duty for a year or so
Never had problems.