How to remove rear mid panel on dc2r

[mnc]

How do i remove the rear mid panel on my dc2r. The panel thats hooked up to the key area to release the boot. I removed 6 bolts so far but it still hasnt budged.

[HoBoz]

Not sure if its the same as the vti-r but this is how i did it.
Theres 4 screws altogether, they are located right in the corner so you will have to remove the plastic cover inside the boot. I couldn't remove it properly so i just pulled it out and popped my hand in there along with a no. 8 or 10 socket can't remember. Just undo 2 screws on each side and pull it out.
http://i40.tinypic.com/969vma.jpg

[mnc]

I unscrewed the screws already. Thanks for your help :thumbsup: My one appears to be silicon'd in around the bolt areas, wont budge lols guess i'll have to hammer it out.