View Full Version : ek9 climate control into ek1
turtle187
24-05-2009, 02:23 AM
hey just wondering if u guys noe how i can get this fitted?
http://i57.photobucket.com/albums/g219/jdmconcept-com-au/oem%20honda/hondacivicek9carbonconsole9900.jpg
pic from jdm concept
im pretty sure this isnt plug and play into my ek1 so how would i fit this?
and what is needed to fit it would b heaps helpful too:thumbsup:
markoJEK1
24-05-2009, 07:23 AM
Im pretty sure that panel is the only plug and play item , you will need the ek9 climate controls, as well as the harness, Im not certain if that harness will plug into your ek1 one.
turtle187
24-05-2009, 05:07 PM
can any1 else help wit this?
Riviera
24-05-2009, 05:19 PM
wat marko said bro...
that panel will go directly into your EK1 but you will need the EK9 climate control
and possibly harness, being a EK1 you probly wont have electronic climate control
you will have manual sliders? which means more and more stuffs
turtle187
24-05-2009, 05:48 PM
ok fark i just tried fitting it but it doesnt go straight in
as the vents of the ek9 climate control is on the left hand side FOOK
but the ek1 vents are in the centre
FAILED!
Raztaz
24-05-2009, 11:54 PM
cause the EK9 has dial controls for the climate control, where we have the slider at the btoom in the middle.
step 1, actualy GET the climate control unit lol
MikeyG
25-05-2009, 12:02 AM
if u want that to fit.... u basiclly need the whole dash from the ek9 including wiring for the hot and cold air wont work wif au spec
Raztaz
25-05-2009, 12:37 AM
this is what you sohuld of got
http://cgi.ebay.com/ebaymotors/JDM-Honda-Civic-EK9-CTR-A-C-Center-Console-B16-VTEC-SIR_W0QQcmdZViewItemQQ_trksidZp3286Q2em63Q2el1177Q QhashZitem2ea577c420QQitemZ200344585248QQptZMotors Q5fCarQ5fTruckQ5fPartsQ5fAccessories
neo_phase
25-05-2009, 07:29 AM
Will the 97 climate control fit his car if it's a facelift model?
EK1.6LCIV
25-05-2009, 07:53 AM
there's a thread on honda-tech somewhere
had pics of how to convert the 96-98 to 99-00 spec :)
alot to do for a novice imho, lol, I hate electrical stuff tho so maybe you'll like doing the task lol :)
also xposed in his em1 build thread did the swap, think there's info in there as well
you could just buy that panel, get the switches off ebay and just have a dummy non working setup, as alot of ppl remove a/c during their builds anyhow, just a thought :)
turtle187
25-05-2009, 09:45 AM
thanks for the replies,
nah ryan i fink i like my aircon LOL so ill part from it
looks like so much work,
maybe ill do it one day
got the link by any chance ryan
Raztaz
25-05-2009, 10:54 AM
Will the 97 climate control fit his car if it's a facelift model?
yea, AUDM never got the interior facelift, all we got was the front of car/grill pretty much lol. A lot of JDM and USDM models got climate control with the facelift
turtle187
25-05-2009, 09:55 PM
hmm im gona try n do this but not now, later down the track
will let u guys noe
EK1.6LCIV
26-05-2009, 08:12 AM
http://www.civicland.com/forum/6th-gen-interior-diys/2370-96-98-99-00-climate-control-swap.html
full thing is on honda-tech, but since I cant view that site at work, this will do ya for now :)
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.