Eletrical problem with my keys ??? [Archive]

View Full Version : Eletrical problem with my keys ???

kustom-konsoles

25-05-2009, 02:49 PM

hi all...
i have been having trouble with my accord recently 95 CD5..

The problem is most definitely Eletrical..

Once i was driving on the freeway and i realized that my Speed o Meter and Rev meter just died, like the needles fell straight to zero really fast....the engine might have turned off but i did not realize that because i have a manual.
everything on my Dash turned OFF CD player and clock was running fine music was uninterrupted...all this happened probably for a max of 3 secs then everything came back...

NOW the car in on my drive way and i know what the problem is but dont know how to fix it...

The problem is the Place you put the key when you go to start the car,
The key has 4 positions.OFF, ACC, ON, CRANK..

When i twist the key in the ACC everything is working like radios et, But when i put the key to the ON position nothing happens, it feels like it is still on ACC but it is not...

When i turn the Key half WAY between ON and CRACK then all the Dash lights come on fuel pumps working etc like it was in the on position.

Then i Crank the car and start it it starts but as soon as i let go of the key it springs back to the on position and everything turns of engine turns off no lights on dash etc cd still working though...

Now what i have noticed is that after starting the engine i let the key spring back half way between ON position and Crank everything continues to run etc just like normal ...

so the problem is that the ON position of the key is not working...

any help is greatly appreciated..

Jarkz

25-05-2009, 05:36 PM

Try getting a new key cut, or new barrel sounds like the fix.

aaronng

25-05-2009, 05:41 PM

The contacts on the ignition barrel have some corrosion. If you can remove it to clean the contacts, you won't need a new barrel/keys.

BUN-135

25-05-2009, 05:56 PM

kustom-konsoles

25-05-2009, 07:49 PM

i have tried my other keys they do the same thing...

so is there any reference on how to clean the contacts ?

CraterTycho

25-05-2009, 09:15 PM

Its the ignition switch, a very common defect for cd5 accords which cause poor contact between the ignition switch contacts which may lead to arcing causing burning of the contacts and increased electrial resistance. As a result, this may interrupt the ignition switch circuit and cause the engine to stall. Additionally, heat generated due to increased resistance may melt solder within the switch and may fall into the drivers footwell.

2nd that. i had the exact same problem and get a brand new ignition switch from honda dealer for approx $80 bucks and now its all good. better get it inspected before u get a new ignition switch, might be just some poor contact point or something. mine was melted so i get a new 1.

kustom-konsoles

26-05-2009, 03:34 PM

ok so i took the ignition switch out and had a look.
there was arcing which caused poor contact,
Everything else was fin not melted etc...

so i cleaned it and it was good to goo.
here are some Pics for future reference in case someone wants to fix theirs..

http://img43.imageshack.us/img43/3126/imag0235.jpg
http://img41.imageshack.us/img41/2323/imag0236p.jpg
http://img40.imageshack.us/img40/4072/imag0237n.jpg
http://img38.imageshack.us/img38/7016/imag0238h.jpg
http://img37.imageshack.us/img37/6317/imag0239.jpg
http://img20.imageshack.us/img20/4109/imag0240.jpg
http://img43.imageshack.us/img43/4600/imag0241.jpg
http://img41.imageshack.us/img41/9103/imag0242.jpg

FAT VTI

27-05-2009, 06:11 PM

for what its worth u can probably just buy a new one and get it fitted.
I had it done for $50 installed.
then u can recondition ur old one and try and sell it to make up the costs.

kustom-konsoles

27-05-2009, 07:04 PM

it only took me 40 mins to get it out clean it and put it back....
so i cant be bothered getting a quote leaving my car there for like a few hours etc...