Clutch help.

[RandyRhydah]

hey guys i just put my new engine in and filled the clutch fluid properly and bled it.. i did about 10 or so steps (pump clutch hold it in undo the bolt then do it back up) and there is plenty of pressure in the pedal but when the car is started it still isnt giving enough bite to change gears or stay stationary in gear with the clutch fuly in. what could be the problem? i will try bleeding it more but if that doesnt work im not sure what to do.


cheers

[OMG.JAI xD]

Checked for leaks?

Pop your head under your dash and see if you can see slight leaks near the top of your clutch pedal assemble.
If there is evident fluid.
Change your master cylinder.

[RandyRhydah]

no leaks.. tried bleeding it more but no difference

[aaronng]

Adjust the piston behind the clutch pedal that goes into the master cylinder.

[RandyRhydah]

ok thanks ill check it out