ITR extractors on B18A Integra

[tegboy]

Does anyone know if a 2000mdl set of ITR extractors will fit a B18A engine? I can get the extractors for a decent price, so would I be worth getting them, because I cannot find any other extractors, to fit my Teg.

Cheers,
Clint

[wynode]

B18A?

[booget]

B18A is the integra LS 1st gen motor

B18B us LS 2nd gen motor

108kw / 103kw

[stocky]

yes will fit, prob is u will have to modify the crossmember
it will hit

[tegboy]

B18A?

B18A was fitted to the 1989-1992 LS Integra. IE G2 Teg...

[wynode]

B18A?

B18A was fitted to the 1989-1992 LS Integra. IE G2 Teg...

Ahh cool......I always assumed it was the a D18 :)

[Chronos]

Only the first gen Integras ran D series engines. D16A1-3 IIRC.

[Dxs]

aussie spec only have d16a3's
a1's are yankee spec i think (basically the same but slightly detuned)

[fried]

will dc2 vtir header fit on a da9 (assuming its the b18a/b engine)?

[FR33K]

fried did you buy a da9 or something.. your reviving all the old threads lol !!
all B series headers are interchangeable
intake manifolds are not

[locote]

how much are you paying for the ITR header????
i wouldnt pay more than 100$$.
the difference you will feel is very minimal!!!!
i know i did that mod:)
save ur cash and get something better, why do you think ppl upgrade their ITR for???

[Da1nONLY]

how much are you paying for the ITR header????
i wouldnt pay more than 100$$.
the difference you will feel is very minimal!!!!
i know i did that mod:)
save ur cash and get something better, why do you think ppl upgrade their ITR for???

hmmmmz... the ITR headers are pretty good!!
ive heard instances where people lose power because they've changed their headers. Few friend has used the JAP Spec ITR headers and they could not feel any difference. I'm still running stock ITR headers...and they are going great!

[locote]

i gained 10hp goin to a mugen copie from ITR..
sound changed aswell.
and top end felt so much better!!!!

[fried]

my dc2 vtir ran 102kwatw with ausdm itr header + itr cat + itr muffler + some cold air piping to the stock filter. so i think the itr header isnt too bad.

i am just helping out a friend, and finding options for them, as their car is having some issues with exhaust and suspension. so i am finding out all options in regarding cheapest options to fix the problems, or slightly more expensive aftermarket options.

so i was thinking of giving him my vtir header + cat, and then possibly he can get a cheap cat back made up.

[Jon_51]

B18A was fitted to the 1989-1992 LS Integra. IE G2 Teg...

my ls was built in jun 93, I always thought it was a b18a, am I misinformed?

[FR33K]

G2 is 89-93
tegboy was wrong..

[FlavzzTEGRA]

if you look at the xforce catalogue of headers vtec and non vtec headers have different part numbers so i dont think they would be interchangable. Dont go by what the general mob tells you from what they have heard unless they have first hand experience. You should be able to get an X-force item to suit this app

[locote]

As I Stated Before I Have Fitted A Itr Header On My Gsi.
Yes It Fits

[SKREMN]

Here are my headders
they are 4 into 1
had to cut the front cross member and remove the front to back one

alot of modifications and had to be reinforced
http://i19.photobucket.com/albums/b164/skremnLS/skidplate2.jpg

http://i19.photobucket.com/albums/b164/skremnLS/Skidplate.jpg

If they are 4 into 1 headders they will sit about this low and you will have to cut the cross member

I made a skid plate to protect them coz its the lowest point of my car and hits absoultly everything
the skid plate saves me everyday

the cross member was cut and shut with metal plate and has a metal pipe inside it for extra reinforcment

[fried]

the cross member you are reffering to is just a re-enforcement plate that holds the 4 header "pipes" together right?

in this case, i would assume a vtir header would fit without modifications.

[SKREMN]

the cross member is the big black metal part of the car that hold the front end of the car together
its the thing that my skid plate bolts onto

[ACTI0NMAN-1]

Not all b series headers are inter-changeable a a b16a header wont clear the sump, as it is slightly shorter. But a b18 will fit a b16. The main problem with the b18 is that the block is either slightly higher or the sump is slightly bigger, I cant remember which one. I know from experience as I tried to fit a b16 4-2-1 onto my b18a and it couldn’t clear the sump..



I also had a set of 4-1 but honestly they are ridiculously low making lowering and speed humps impossible. I also found that they are useless for ant power under 5000rpm

[Jezda9]

You Can Get Xforce 4-2-1 Stainless Steel Extractors for about $450, They give quite a descent increase in HP and lookin Fn sweet as well.

[LO_N_SXC]

Sugesstion = Get some made up???

better than chopping into cross members and so on, many exhaust shops or performance shop should be able to make a pretty decent set up for you guys looking at getting extractors than forcing an DC2 extractors in a LS........

PS: I already have extrators so I wouldn't know what the difference would be between oem and aftermarket..............

Alex

[SKREMN]

i got these custome made for me and there is no possible way to fit 4-1 only 4-2-1 on an LS with major madifications

[integral90]

i bought some itr headers for the da9, so i will tell you all how that goes :D

[fried]

thanks for the info skremn. i guess even if i get x-force 4-2-1 header made for b18 from a gsi dc2, it wont fit without modification.

[SKREMN]

x force 4-2-1 will fit if your remove your front to back cross member

[fried]

still looking for answers.

does anyone know of any header that is specifically made for a da9 integra (91-93 integra with b18b) ???

[Jezda9]

if you try X force they might have some
i got mine from them but i have a DA9 with B18A1