buddyclub n+

[eight]

hello boys and girls

i need to replace the upper pillow mounts on my coilovers and was wondering if the standard dc2r top hats will fit as a replacement. if not, where can i purchase the bc upper mounts seperately?


thank you

[cymax]

try JDMyard mate. I don't think DC2R top hats will fit. Also, even though it is going to fit, it'll shift and create unnecessary noise. PM JDMYARD will be good

[eight]

thanks for the info!

anyone else with experiences?

[bennjamin]

hello boys and girls

i need to replace the upper pillow mounts on my coilovers and was wondering if the standard dc2r top hats will fit as a replacement. if not, where can i purchase the bc upper mounts seperately?


thank you

They will 100% fit the Buddyclub coilovers.

Any top hats off ED / EG / EK and DC will suit.

[wasabi]

i got N+ without the top mounts and i just use my stock EK top mounts and it works fine.

[RtN]

i got N+ without the top mounts and i just use my stock EK top mounts and it works fine.

exact same

[eight]

thanks for the help guys, might try fit the standard ones this weekend if i can find where they are in the garage!

also, wasabi and RtN - any issues with noise etc as mentioned above?

[ekdez]

dc2r top mounts on n+ works fine.
i had that set up on my old ek. :thumbsup:

in regards to noise.
there is no knocking or odd noises.
it was a very clean ride. only noise i got was from the road.
also i had my dampers set on +15 F and R for street driving.
and my car was approx 5 cm's off the road.

hope that answers your question. :thumbsup:

[RtN]

yeh no noises whatsoever. plus there's cushioning inside the top hat where it contacts the spring anyway.

[eight]

perfect! thanks fellas.