Hytec Replica Headers compatible

[RR-04-RR]

Hey guys

Quick question about the hytec replica headers.. cant seem to find anything

Are these headers compatible with a/c and p/s?

Anyone who has experienced with these.. please let me know..

Cheers

[xtat1k]

Yes they are. and i have them on my car atm.

[RtN]

well hold up on that answer.. thats only true if you're on small tube tri-y. If you're on big tube tri-y, A/C is not compatible I think.

[RR-04-RR]

Yes they are. and i have them on my car atm.


well hold up on that answer.. thats only true if you're on small tube tri-y. If you're on big tube tri-y, A/C is not compatible I think.

ok thanks for the replies guys

xtat1k - if you can take a photo of your engine bay.. that'll be great.. or do you know if yours is the large tube or small?

[OMG.JAI xD]

As Rtn said.
Big tube dont fit.

I got custom hytech replicas. (workshop made).

And my one just clears the sump. And touches the ac compressor.

[xtat1k]

mines the small tube.
im only running i/h/e.
no point for running big tube.
and i can tell you now they sit damn low!

[RR-04-RR]

haha if you can take some photos of how long we're talking.. that'll be great... my cars low enough.. i'm assuming.. i'll have to be more careful lol

[OMG.JAI xD]

The front of my headers are probably 75mm of the ground.
The middle is abit lower cause im not running an exhaust bracket. Sits around about 60-50mm.

And my car is probably dropped as much as xtatiks car. Maybe even less. (judging by his "car for sale" pictures.)

Tri-y aint the best ground clearance headers on the market.

EDIT: My cars dropped 2.5" from stock vti-r height. So i sit just above 100mm without a front lip.

[RR-04-RR]

The front of my headers are probably 75mm of the ground.
The middle is abit lower cause im not running an exhaust bracket. Sits around about 60-50mm.

And my car is probably dropped as much as xtatiks car. Maybe even less. (judging by his "car for sale" pictures.)

Tri-y aint the best ground clearance headers on the market.

EDIT: My cars dropped 2.5" from stock vti-r height. So i sit just above 100mm without a front lip.

Cheers for the reply

Cars dropped just as much yours.. (poss a tad higher.) not too fussed on clearance.. i'll see how it goes once its installed :D

[OMG.JAI xD]

Cheers for the reply

Cars dropped just as much yours.. (poss a tad higher.) not too fussed on clearance.. i'll see how it goes once its installed :D

You will be fussed about clearance when you hear a big bang going over a high spot at night.

=]

According to toda. Their supersprint car lost 5 kw at the topend with small dings. My ones are 10 times worst. I probably lost an easy 5kw from my headers being banged up.

Drive safe bud =]

[RR-04-RR]

You will be fussed about clearance when you hear a big bang going over a high spot at night.

=]

According to toda. Their supersprint car lost 5 kw at the topend with small dings. My ones are 10 times worst. I probably lost an easy 5kw from my headers being banged up.

Drive safe bud =]

haha cheers man.. i barely go over anything high and barely scrape unless i have to, so i should be alright.. i hope lol

[xtat1k]

i drive normally down the road and it scrapes.
trust me, once you hear it you'll hate it!

[xtat1k]

http://img.photobucket.com/albums/v55/namzie/turtleguy/_MG_0438.jpg