Sub and Amp advice

[Gq_]

I'm looking at buying this Phoenix Gold RSDc 102 /104 10" Competition Sub.

Click link below to look at specs
http://www.rodinaudio.com/pgMobile/pdf/radialSD/subwoofers.pdf

I'm more concerned with the impedance coz the:
RSdC 102 is 2/2 ohms
and the
RSdC 104 model is 4/4 ohms

I currently have a Soundstream 2 channel Mono Class A Amp with the following specs:

2 x 25W @ 4 ohms
2 x 100W @ 2 ohms
2 x 250W @ 1 ohm
2 x 500W @ ½ ohm
2 x 500W @ ¼ ohm

1 x 200W @ 4 ohms bridged
1 x 500W @ 2 ohms bridged
1 x 1000W @ 1 ohm bridged
1 x 1000W @ ½ ohm bridged
Fuse: 80A Maxi-Fuse

Which sub model, the 102 or 104, would be more suitable with my current amp?

Your help would be appreciated.

[arverson]

id go the dvc 4ohm (104) assuming this is for a daily setup and you only plan one running one single sub. wire it in parallel and run it at 2ohms.

[Gq_]

id go the dvc 4ohm (104) assuming this is for a daily setup and you only plan one running one single sub. wire it in parallel and run it at 2ohms.

Yeah I'm going to be running 1 sub and its gonna be a daily set up.
Will I need a capacitor and 4ga wires as well? Or will 8ga wires be fine?

[arverson]

no need for a cap. 8awg will be fine in your case.

[reedyek4]

if money isnt an issue and you can arrange a good setup include these:

Alpine:

- 6.5" 2-way components all round (type-X) incredible!
- 10" type-X sub
- Pdx 1000.1 for sub
- Pdx multichannel amps for speakers.

should be sounding good :p