View Full Version : D16A8 Tappet Adjustment
buggo
01-07-2009, 07:54 PM
I have searched & searched but can not find the correct clearances for a EG D16A8 engine.
Also does anyone who has done an adjustment on these engines have any tips etc? I have read ECU-MANS DIY sticky.
Cheers
SINISTR
01-07-2009, 09:01 PM
http://www.spoonertuner.com/manuals
there is a manual there - have a look.
buggo
02-07-2009, 11:18 AM
http://www.spoonertuner.com/manuals
there is a manual there - have a look.
Thank you. But i am unable to download a 114mb torrent file at the moment. :(
SINISTR
02-07-2009, 11:34 AM
its good to have on file for future anyway. I'll see if I can dig some info up and post for you unless someone else beats me to it.
buggo
02-07-2009, 05:48 PM
its good to have on file for future anyway. I'll see if I can dig some info up and post for you unless someone else beats me to it.
After searching the net for a while i found the specs to be:
INTAKE 0.13MM - 0.17MM
EXHAUST 0.15MM - 0.19MM
Thank you for your help. I will be uploading the manual when i am able to. :thumbsup:
ECU-MAN
03-07-2009, 09:27 AM
http://b16a2.kicks-ass.net/automotive/honda/techguide/crx/1988-89_tech_guide.htm
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.