whiteline bush not fit! need new one!

[55EXX]

just after months of it sitting in my garage put my asr brace on the rear. the asr shits on the whiteline for quality! the thing that sucks is the whiteline bush i have now from the whiteline kit does not fit the oem d bracket. it is too small and moves. i need to get just the poly d bushes and am struggling so so badly to find out some one in australia and who it is i should call on monday to get some. do any traders on here sell them? the bar is 22mm

[riruiz_88]

im quite sure u need to use oem d bushes and d brackets for the ASR. honda sells the d bushes for roughly $9-$10 each, here is the part number for 22mm bush: 52315-ST7-Z01. i dont have the part number for d brackets, but just say you want d brackets for '01 DC2R. hope this helps man

[55EXX]

yeah i want poly not rubber tho

[90LAN]

go to super cheap
they have blue super pro bushes made of poly
mite have some luck there as i saw a few large d bushes there

[Limbo]

if the eg is anything like the ek you need to use the whiteline bracket, modify it slightly so you can run it with the asr. There was a pic of this before i can't rem where. I ended up doing it also.

Supercheap sells them for $20 or so i got a set also cos i was gonna do what your stating but ended up modifying the whiteline brackets to sit onto of the ASR brace

[55EXX]

asr brace went in a treat! fitted the back brackets and all! i was amazed at how much this kit was over engineered! the bar went back on perfectly the same but just the bushes arent the same and the bush moves around in the oem bracket.

i'll head into supercheap today and have a ask but am i able to call super pro or other companies and order it from them?

the white line kit modified to suit asr must only be in ek. i know my last ek whiteline bar had little bends near the bush mount the eg one is completely straight tho.

[55EXX]

frustrated as ****! no one has a f#cken clue about what i am trying to get! i was to say what model car i say integra dc2 type r they either say no listing or what year (i say its for a civic but i need a bush from a dc2 r with a 22mm bar) they then say none in stock might be a few weeks . super pro have a listing none anywhere need to be made.

anyone want to sell me what i need? please

[aaronng]

Measure the dimensions and get an equivalent. Doesn't need to be specifically for DC2R.

[riruiz_88]

part number for Nolathane 22mm d bush is: 42922. it is a poly bush. you will also need d bracket, oem WILL NOT fit this bush as i tried but didnt fit. i can get you the part number for the d bracket, except i need some measurements. measurement i need is the distance between mounting hole to other mounting hole.

or you can get whiteline 22mm d bush part number is: W0400-22.
whiteline d bracket to suit above is: KS6B (comes with mounting hardware).

[55EXX]

riruiz_88 thats the key "oem bracket will not fit"!

sorted it out now thanks guys. i got a pedders bracket to suit the whiteline bush. wish i knew this before i shelled out 60 for an oem bracket thinking thats what the asr needs when the pedders ones that do the job were 8 bucks each. fitted it on just then. worked a treat.

lesson learnt - should have bought my bush and asr down to pedders before asumming you need an oem bracket.

awesome just need some skunk 2 red anodised lca's to complete the bling.