EG Speedo not working?

[ejc_installations]

Hey all,

Another problem with my ride.

The cars speedo sits well under the needle...... I thought it was becouse i changed the battery but can find any fuses blown or plugs out.

When i put ignition on it moves to right under the needle but goes nowhere after.

Any ideas...

Cheers!

[Bludger]

very vague description of your problem.

I recommend you take your car to an auto electrician.

[CRXer]

your needle is loose by the sounds of it & has popped over the zero stop pin,
just pull the cluster out & gently lift the end of the needle over the pin till it rests ontop of it,then make sure your needle is pushed snuggly onto the centre.
hopefully nothing is damaged & its still in calibration....

[ejc_installations]

i thought so... give that a try tomorrow...

cheers guys