can hi beam change low beam??

[EP3EVA]

im talking about HALOGEN BULBS h4's.

i want to change my hi beam light become my low beam...

reason is my hi/low beam is diff , low beam with stock yellow light and hi beam with 4000k pure white.


these are ultra white HALOGEN BULBS...


thanx in advance.

[shadou]

what ? you want normal headlight beam to be a yellow colour ? pretty sure that is illegal in VIC, but are you asking whether you can make the high beam filament become the low beam ? No, it's a stupid idea if so, just buy whatever aftermarket colour bulb instead ?

[EP3EVA]

what ? you want normal headlight beam to be a yellow colour ? pretty sure that is illegal in VIC, but are you asking whether you can make the high beam filament become the low beam ? No, it's a stupid idea if so, just buy whatever aftermarket colour bulb instead ?


sorry, my words didnt make it clear.


ok , 1st my low beam is not pure yellow, is these stock (OEM ) sunset dimmed style ,where you see most car have them,.

2nd, i have aftermarket Ultra white HALOGEN BULBS h4's already install them my car already.

3rd, and my low is still stock (OEM ) sunset dimmed like i havent install these Ultra white HALOGEN BULBS h4's, but i install it already,....

4th, but some how only my hi beam are Ultra white..


5th, ok i perfer stock (OEM ) sunset dimmed on Hi beam and Ultra white on low beam,...


my question is can it be done??


thanx in advance

[aaronng]

Your low beams have different bulbs. Just find out the size of the low beam bulbs. If they are H4 like your high beam, then you can swap them around. Otherwise you need to buy new bulbs of the correct size.

[EP3EVA]

Your low beams have different bulbs. Just find out the size of the low beam bulbs. If they are H4 like your high beam, then you can swap them around. Otherwise you need to buy new bulbs of the correct size.

thanx for reply guys..

never knew that you need 2 bulbs,one for HI and one for LOW.

dont normally one bulbs share HI/LOW?? like a just shot up/down?

[aaronng]

thanx for reply guys..

never knew that you need 2 bulbs,one for HI and one for LOW.

dont normally one bulbs share HI/LOW?? like a just shot up/down?
Depends on the car. The older civics had H4 bulbs with combined high and low beam. Current models tend to have 1 bulb for low and 1 for high, like in my Accord.

[EP3EVA]

Depends on the car. The older civics had H4 bulbs with combined high and low beam. Current models tend to have 1 bulb for low and 1 for high, like in my Accord.

thanx now i get it!!!

[02gzm]

H4 Globe

http://www.allworldautomotive.com/images/userphotos/12570_16265.jpg

H4's run a duel filament with one filament partially shielded by the reflector you can see at the top of the bulb. It runs separate power lines for each filament in the bulb and hence has 3 prongs at the bottom.

H1 Globe

http://ecx.images-amazon.com/images/I/41XQZZ81KPL._SL500_AA280_.jpg

HB4 Globe

http://www.a1motorstores.co.uk/prod_images/00/01/21/PhilipsBlueVisionHB4.jpg

I always thought EP civics still ran a H4 globe. Newer civics use HB4. If you've changed only your Hi-beam bulbs then you probably run aftermarket headlights with two H1 globes or possibly one H1 and one HB4. These will be set in different reflector housings as they are single filament.

There is 1 prong power connector and earthing through the body of the bulb in H1's and 2 smaller prongs in the plug of a HB4 for power and earth.

Hope that gives a better idea of what bulbs you're using.

[Bludger]

sorry, my words didnt make it clear.


ok , 1st my low beam is not pure yellow, is these stock (OEM ) sunset dimmed style ,where you see most car have them,.

2nd, i have aftermarket Ultra white HALOGEN BULBS h4's already install them my car already.

3rd, and my low is still stock (OEM ) sunset dimmed like i havent install these Ultra white HALOGEN BULBS h4's, but i install it already,....

4th, but some how only my hi beam are Ultra white..


5th, ok i perfer stock (OEM ) sunset dimmed on Hi beam and Ultra white on low beam,...


my question is can it be done??


thanx in advanceyes it can, use ultra white bulbs for low beams and normal bulbs for high beam.

my answer may seem stupid to you but all you have to do is use a bit of logic to solve your own question.