PDA

View Full Version : ek1 help



muzukashi
27-07-2009, 07:44 PM
what is the stock ek1 exhaust piping/b pipe size?
tyty

muzukashi
29-07-2009, 05:32 PM
anyone know?

beeza
29-07-2009, 06:45 PM
It's 1 and 3/4 inch or 1 and 7/8 inch...not positive.

muzukashi
29-07-2009, 07:05 PM
i have a muffler with the axle which inlet's size about 2"
would this bolt directly onto the stock piping?

if not what would have to be done for it to be fitted on properly

beeza
29-07-2009, 07:08 PM
Bolting exhaust parts on is best as you can easily remove and/or replace them if need be.But I think with those 2 different sizes you will have to get it welded together.You can do that and it will be fine.

muzukashi
29-07-2009, 07:18 PM
can anything else be done to make it fit , dont really want too weld it on cause probably gona wanna repalce it sooner down the line

beeza
29-07-2009, 07:22 PM
Phone a friend!

Help,someone :)