View Full Version : CU2 Lux boot dimension measurements
PNR888
31-07-2009, 01:01 AM
Hi, Could any CU2 Lux owner please measure the width, depth, and height of their boot for me? many thanks.
For width, please measure both the wider section (toward outside) and narrower part (toward midway in)
For depth, it is the booth floor length from back of rearseat to boot gate.
For height, from floor to rubber seal of rear windscreen.
Went to my local dealer, there were heaps of standards but no lux. unable to get the measurement. Thanks.
denot
31-07-2009, 03:50 PM
Hi, Could any CU2 Lux owner please measure the width, depth, and height of their boot for me? many thanks.
For width, please measure both the wider section (toward outside) and narrower part (toward midway in)
For depth, it is the booth floor length from back of rearseat to boot gate.
For height, from floor to rubber seal of rear windscreen.
Went to my local dealer, there were heaps of standards but no lux. unable to get the measurement. Thanks.
Strangely enough, STD and LUX boot's capacity are the same: 467L
http://euro.honda.com.au/range-pricing.aspx#dimensions-weights-capacities
PNR888
31-07-2009, 11:36 PM
I think Honda just didn't bother to do a separate measurement for either Lux or STD.
Even a novice can tell the difference in boot size.
I hope the Lux has a few more litres on top of 467L.
and not STD has a few litres short of 467L
aussiebuddha
10-04-2011, 05:26 PM
sorry to revive thread, but does anyone has the actual measurements?
I have one and could measure but if someone knows already it would save me some work.
Cheers
Fredoops
10-04-2011, 06:38 PM
sorry to revive thread, but does anyone has the actual measurements?
I have one and could measure but if someone knows already it would save me some work.
Cheers
Go ahead and measure it and post it here please. :-)
I remember it was small, when I first saw the CU2 I was like:"WTF wheres all the room gone lol"
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.