Bang for Buck 4-1 header

[ninzee]

hi everyone

just wondering what are the best bang for buck 4-1 headers for a b16a.

thanks Ninzee

[LowEk]

ide have to say JDM headers...

[ninzee]

lol yea but theres not that many around lol

[EGJOE]

I saw these el cheapo copies, cant complain for 200 bucks.....
http://cgi.ebay.com.au/HONDA-B16-B18C-INTEGRA-CIVIC-STAINLESS-STEEL-4-1-HEADER_W0QQitemZ200369776715QQcmdZViewItemQQptZAU_ Car_Parts_Accessories?hash=item2ea6f8284b&_trksid=p4634.m333.l1262

[OMG.JAI xD]

Go ebay. And type in integra type r obx.

4-1 Stainless steel lifetime warranty for just your price range at the current dollar.

Need custom fitment with the cat to fit an eg.

[ninzee]

Yea I think I might buy the obx iv been leaning towards them I got a diff cat so they should fit thanks for all the help just out of curiosity they say integra 97-01 would they still fit and hav good ground clearance thanks heaps

[OMG.JAI xD]

The obx headers 4-1 say it fits type r (hence the reason 97-01)
If it fits type rs, itll fit any b series or b series swapped car.

They list that only because type rs (some, if not all) come with a subframe brace, and some headers dont clear that brace.

So what im saying is, if the obx states that its direct bolt on, then itll clear that brace, so cars without that brace will definately fit.

If youre lowered past 2.5" then you should start worrying about ground clearance. 2" and higher, no need to worry.

[Cooker]

Xforce 4-1

[ninzee]

thanks for all the replys i ended up buyin tri y hytec replicas for 320 deliverd ill let you know how they go

[TYPE-ONE]

where did u buy them from for that price?

[hussLEr]

where did u buy them from for that price?

+1.

New or used?..

[EGJOE]

TIP...When you first get them on and take it for a test drive take it easy. First time we put tri y on forgot to check out ground clearance dent the bottom with in first 5 min lol.

[zco]

TIP...When you first get them on and take it for a test drive take it easy. First time we put tri y on forgot to check out ground clearance dent the bottom with in first 5 min lol.

LOL:thumbsup:

sorry joe., couldnt help it

[ninzee]

lol thanks joe ill keep that in mind:thumbsup:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=270440841774

heres the link ill let you know if there any good n how long they take to get here.
the sellers got heaps just look at the other items hes selling so if this one finishes dont worry lol

[EGJOE]

LOL:thumbsup:

sorry joe., couldnt help it

hehe:p


lol thanks joe ill keep that in mind:thumbsup:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=270440841774

heres the link ill let you know if there any good n how long they take to get here.
the sellers got heaps just look at the other items hes selling so if this one finishes dont worry lol

Look good in pics. You going to do before and after dyno?
would be interesting.:thumbsup:

[ninzee]

Look good in pics. You going to do before and after dyno?
would be interesting.:thumbsup:

yea i was gunna but im putting a full exhaust on with them so unless u want me to do that i know a bloke with a dyno so it wouldnt be too hard just we wouldnt know the gains from the extractors only

[JDM-EGG]

its long tube so u would need to modify b bipe ? fark i want it but cbf modifying b bipe.

[Limbo]

JDM 4-1 best bang for buck, also best OEM fitment on all b series

[ZeForce]

RMF narrow is by far the best bang for buck 4-1 header you can buy

[JDM-EGG]

how much longer is this header compared just mugen 4-1 replicas .. cause my ground clearance is farked up! =='

[ninzee]

umm im not too sure but iv been told i wouldnt be able to lower my car anymore that 2" from stock or it would be a hassle to get around

[jazzadc2r]

has anyone had much experience with those OBX headers? / OBX parts in general?