DA9 Rear Camber Correction

[tez12]

hey guys,

just put a set of fat fives on my DA9 teg. tire size 195/50/15. i have installed an ingalls camber kit on the front but am having some camber issue on the rears.

Anyone try the washer trick found on the G2IC website?

http://www.g2ic.com/tegtips/brakesus/4.html

I have about -1.5 degrees of camber...any idea how much correcting this needs in mm? i realise i may need to source longer bolts. Just wanted to see if this was a good solution or if anyone has views against it.

Cheers

[gbpracing]

Best to have zero camber on the rears and zero toe angle for street. Might get away with -0.5 rears anymore than that will wear out the inside tire quick time. There adjusters that can be bought that allow you to adjust out or in what ever camber you desire. See JDMYARD he knows plenty.

[Jon_51]

There's no reason why the washer trick won't work. Just make sure you get longer bolts as the tip says.

[IZY-10]

yes i did. It worked quiet well. Tire wear became way more even

[tez12]

how far you did you space in mm? i have -1.5 camber on the backs...dont really know how much it would take to bring that back