Melbourne ep3 owner roll call

[ep3_ctr]

guys, there are too many NSW owners out there :p If your a melbourne owner list your car and mods below so we can get too know each other: Ill start

name: brad
2002 civic ep3 championship white

mugen airbox
mugen twinloop
hondata kpro
toda headers
j's racing rear sway + stabilizer
front strut bar
innovative engine mounts
energy motor mount inserts

interior
- JVC head unit
- carrozeria tweets
- carbon inserts

[EP3EVA]

Nice to meet you brad!! see you around. well done on the set up

name: Jack
2002 civic ep3 championship white C package


Exhaust system: Tri y 4-2-2 hearders

100cpsi metal cat

skunk2 mega power R (70mm)

Intake: FUJITA CAI


Engine: Spoon engine damper


interior: some Jap 2x din tv,cd player

[ep3_ctr]

Nice to meet you brad!! see you around. well done on the set up

name: Jack
2002 civic ep3 championship white C package


Exhaust system: Tri y 4-2-2 hearders

100cpsi metal cat

skunk2 mega power R (70mm)

Intake: FUJITA CAI


Engine: Spoon engine damper


interior: some Jap 2x din tv,cd player

hey, you notice anything different with the high flow cat?

[EP3EVA]

hey, you notice anything different with the high flow cat?

before that i had skunk2 catback just last week install the header and metal cat, yeh so dont really know who gain what,....and to me is louder and sound a bit diff..

[mtonep3]

name: Milton
2002 civic ep3 championship white C package


Everything is stock.. except
Intake: mugen air box


interior: Carrozeria speakers, head unit.

exterior: FL projector head lights.

WE should organise a melb EP3 meet :)

[ITRDC2]

name: Milton
2002 civic ep3 championship white C package


Everything is stock.. except
Intake: mugen air box


interior: Carrozeria speakers, head unit.

exterior: FL projector head lights.

WE should organise a melb EP3 meet :)

hey are you the one who go service @ chasers?

[mtonep3]

Na I don't go chasers.. Never been there. Could be previous owner because he goes chasers alot for his other car.

[ITRDC2]

oh so is ur ep3 with a mugen grille?if so im sure i saw ur car :)

[ep3_ctr]

name: Milton
2002 civic ep3 championship white C package


Everything is stock.. except
Intake: mugen air box


interior: Carrozeria speakers, head unit.

exterior: FL projector head lights.

WE should organise a melb EP3 meet :)

yeh a meet would be good? So how many melb ep3s we got? Just 3 lol? there must be few more.

[ITRDC2]

should have Kaze86 and me as well

[KaZe86]

yo names steven


2001 Honda Civic Type R EP3

Engine Mods:
Toda Headers
Injen Cai
5zigen Exhaust Catback
J's Racing Engine Torque Damper
Spoon Socks

Driveline & Suspension:
J's Racing Front Strut Brace
Cusco Rear Strut Brace

Wheels & Tyres:
Te37
17x8.5 +30 fronts
17x7.5 +40 rears

Interior:
Razo Racing pedals

Sound:
Stock

Exterior:
Stock HID's
T10 Front Parkers
T10 Rear Number Plates Parkers
S2000 Antenna
Benen Black Rear Tow Hook


btw brad where did you get your kpro from? and tuned also? thanks

[mtonep3]

oh so is ur ep3 with a mugen grille?if so im sure i saw ur car :)

No I don't have mugen grille, I wish though, mines stock except for the fl projector head lights! You can help me fix my high beams right? Because the wiring is not right. I had a look at your diagram and I don't really know how to do it....

[mtonep3]

Steven I have a friend who works with you at nab. He drives an em1 and he told me you might be selling your 5zigen cat back.

[ep3_ctr]

guys im going to be at winton on the 21st, anyone else up for it?

[bbds]

02 Ep3

My name is David

Car is completely stock standard =)

[KaZe86]

Steven I have a friend who works with you at nab. He drives an em1 and he told me you might be selling your 5zigen cat back.

oh yeah his name is jack? yeah im going to sell the 5zigen soon once i find another exhaust you interested?


guys im going to be at winton on the 21st, anyone else up for it?

i would but i have work cant really afford to take days off kinda saving for coils and stuff before i hit the track hope you do well! :thumbsup:


02 Ep3

My name is David

Car is completely stock standard =)


lies!! :D

[ITRDC2]

No I don't have mugen grille, I wish though, mines stock except for the fl projector head lights! You can help me fix my high beams right? Because the wiring is not right. I had a look at your diagram and I don't really know how to do it....

hey that diagram is not mine, i just found from the web, im sure my mechanics can sort out for you, pm me if you interest trying my mechanics and probably i need to have a look at you head lights as well cuz i think i need to sort the right rubber cover for the projector lights end!cheers

[ITRDC2]

oh yeah his name is jack? yeah im going to sell the 5zigen soon once i find another exhaust you interested?



i would but i have work cant really afford to take days off kinda saving for coils and stuff before i hit the track hope you do well! :thumbsup:




lies!! :D


:thumbsup::thumbsup::thumbsup::thumbsup:
working at nab!!! good money ey!

[KaZe86]

:thumbsup::thumbsup::thumbsup::thumbsup:
working at nab!!! good money ey!

no chance! broke as! :(

[blk_shadow]

no chance! Broke as! :(

lies!!!!

[veecee]

I'm actually ex-Sydney now in Melbourne.
Name: Vinny
2002 EP3 CW
Mod: Fujita CAI

Brad, the Winton track day sounds interesting. Keep us posted on how it goes. I did Oran Park a few months ago before I moved down. Unfortunately my tranny drain plug decided to do a runner during my 1st run... It was terrific fun while it lasted!

[ep3_ctr]

I'm actually ex-Sydney now in Melbourne.
Name: Vinny
2002 EP3 CW
Mod: Fujita CAI

Brad, the Winton track day sounds interesting. Keep us posted on how it goes. I did Oran Park a few months ago before I moved down. Unfortunately my tranny drain plug decided to do a runner during my 1st run... It was terrific fun while it lasted!

yeh should be good. I've got some new oil + brakes, just trying to source some slicks now. A friend is trying to get me some federal 215 45 17 for $130 each brand new which i though was pretty good. I'll be taping and taking some pics so ill keep u guys updated :thumbsup:

[bbds]

hi guys, just thought i'd share a clip with you =)

http://www.youtube.com/watch?v=8EtJS85VH30

[EP3EVA]

hey nice vid, is the other eg?

[bbds]

hey nice vid, is the other eg?

yeah its an EG

[EP3EVA]

yeah its an EG

should make a vid, you and some turbo car,..


or the eg has k20?

[bbds]

should make a vid, you and some turbo car,..


or the eg has k20?


i would prefer to stay away from eg k20's lol.
my mate had one and that thing is fast

[veecee]

Where do you guys go to get your EP3's serviced in Melbourne?

[ITRDC2]

dont matter, just use the right oils.

[blk_shadow]

Where do you guys go to get your EP3's serviced in Melbourne?

Me and my mates go to Cosmic Racing.

Good job,good price :D

[mtonep3]

imo melb EP3 meet, with a photo shoot....
anyway, heres a pic of my car, recently taken...

http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs157.snc1/5880_117619092020_520927020_2718110_2356601_n.jpg

[KaZe86]

chinaaaa townnn lols is this the car i saw at the car wash last time?

[mtonep3]

Lol which car wash?? I never seen another ep3 while I wash my car..
I love the chinatown back ground lighting. When I left my car there to park that night, I saw some mainland Chinese taking photos of my car .. :D

[veecee]

Me and my mates go to Cosmic Racing.

Good job,good price :D
Thanks mate. Can you give me their contact details?

[KaZe86]

it was in footscray at wash me it was a facelift cw one also i saw a black ep3 there also a few days ago

Just noticed your car isnt a fl model just headlights

[mtonep3]

Yeah it's a pre fl, but with the fl projector hid head lights. So you from around the west side??

[nnnone]

north side of melb
02 cw ep3

sup !

[EP3EVA]

KaZe86...i think i saw your car at this workshop name Speed GT or something, in box hills?.

[KaZe86]

Yeah it's a pre fl, but with the fl projector hid head lights. So you from around the west side??

ohh ic yeah im from the westside



KaZe86...i think i saw your car at this workshop name Speed GT or something, in box hills?.

nope must be a different one havent been to boxhill with my car

[mtonep3]

KaZe86...i think i saw your car at this workshop name Speed GT or something, in box hills?.

where abouts was the work shop?? could be me..

[EP3EVA]

where abouts was the work shop?? Could be me..

box hills ,

[ep3_ctr]

some winton footage, first track day :D

http://www.youtube.com/watch?v=OcE4UjD0MPY

[mtonep3]

What was the best time you end up getting??

[ep3_ctr]

What was the best time you end up getting??

like 1.59, it was wet sliding everywhere

[veecee]

Nice work mate! How many people were there and how much track time did you get?

[Jibz]

Hey, I'm Julian

2003 EP3R

Engine Mods:
Gruppe M intake

Driveline & Suspension:
Mugen Sport Suspension
Mugen Type S brake pads

Wheels & Tyres:
Stock rims, RE001.

Interior:
Head unit from previous owner with G-Sensor (it cuts out during hard cornering, possibly giving passengers epileptic seizures as it flashes on and off.)

Sound:
Stock

Exterior:
Stock HID's
LED Front Parkers
LED Rear Number Plates lights

Getting money together to do clutch and flywheel as well as exhaust. Would very much like a meet so that we can all get to know one another!

[KaZe86]

welcome julian

where you from btw?

i think i saw you once driving cant be exact lols

to be honest since i got my ep3 ive seen so many now o_O lols but when i was looking it was so god damn hard

[EGBOY]

Hey, I'm Ian

2001 EP3R
Championship white ( of course )

Engine Mods:
Eagle rods
Cp pistons
ross rings
cometic headgasket
port and polished head
buddyclub N+ cams
buddyclub valves,valvesprings and retainer
buddyclub Adj cam gears
80mm throttle body
full mirror polished inlet manifold
hondata thermal gasket
1000cc RC injectors with clips
high flow fuel rail
turbosmart fuel reg with gauge
custom candy blue rocker cover
turbosmart raceport BOV
custom twin end tank cooler painted black
2.5" cooler piping
sidewinder stainless manifold
Tial 44 gate
garrett gt35/40 turbo
3" exhaust, turbo back with a custom muffler, black dump style tip
kpro....

Driveline & Suspension:
tein flex all round with uprated pillowballs
j's racing roll centres

Wheels & Tyres:
stock wheels with shite tyres
also powrdercoated 16" dc5 wheels with re55s
need new wheels....

Interior:
stock...
but half cage getting built at the mo...

Sound:
Stock but getting rid of stereo

Exterior:
12000k HID's
extended nuts

maybe there is more... cant think of it at the mo...:P

not finished as yet... needs a fuel pump then its tune time..:P

[ITRDC2]

that sick as.....

[denrie]

Hey, I'm Ian

2001 EP3R
Championship white ( of course )

Engine Mods:
Eagle rods
Cp pistons
ross rings
cometic headgasket
port and polished head
buddyclub N+ cams
buddyclub valves,valvesprings and retainer
buddyclub Adj cam gears
80mm throttle body
full mirror polished inlet manifold
hondata thermal gasket
1000cc RC injectors with clips
high flow fuel rail
turbosmart fuel reg with gauge
custom candy blue rocker cover
turbosmart raceport BOV
custom twin end tank cooler painted black
2.5" cooler piping
sidewinder stainless manifold
Tial 44 gate
garrett gt35/40 turbo
3" exhaust, turbo back with a custom muffler, black dump style tip
kpro....

Driveline & Suspension:
tein flex all round with uprated pillowballs
j's racing roll centres

Wheels & Tyres:
stock wheels with shite tyres
also powrdercoated 16" dc5 wheels with re55s
need new wheels....

Interior:
stock...
but half cage getting built at the mo...

Sound:
Stock but getting rid of stereo

Exterior:
12000k HID's
extended nuts

maybe there is more... cant think of it at the mo...:P

not finished as yet... needs a fuel pump then its tune time..:P

Nice! :) Any video's of car or pics of engine bay? :)

[KaZe86]

lmao fkn IAN!! no wonder you been so hush hush lately lols will see you at the next meet with the beast i hope :thumbsup:

[EGBOY]

lol steve...yeah, been a busy boy! heheh that and gettin the k24 clubman on the road...
oh ps: seen your corolla down in anglesea about 3weeks back.. :P


Nice! :) Any video's of car or pics of engine bay? :)

will post a few pics up soon...

[blk_shadow]

farrrkk....

thats hectic....u r a dedicated owner LOL

[iLlusion10]

woah you've been getting busy lately Ian haha, how much you expect to make atw

[KaZe86]

lol steve...yeah, been a busy boy! heheh that and gettin the k24 clubman on the road...
oh ps: seen your corolla down in anglesea about 3weeks back.. :P



will post a few pics up soon...

lols yeah seen the clubman fark me that thing is beast aswell ahahaha damn i havent seen the rolla since i sold it =( oh wells better things to come man ahahaha

[ep3_ctr]

Hey, I'm Ian

2001 EP3R
Championship white ( of course )

Engine Mods:
Eagle rods
Cp pistons
ross rings
cometic headgasket
port and polished head
buddyclub N+ cams
buddyclub valves,valvesprings and retainer
buddyclub Adj cam gears
80mm throttle body
full mirror polished inlet manifold
hondata thermal gasket
1000cc RC injectors with clips
high flow fuel rail
turbosmart fuel reg with gauge
custom candy blue rocker cover
turbosmart raceport BOV
custom twin end tank cooler painted black
2.5" cooler piping
sidewinder stainless manifold
Tial 44 gate
garrett gt35/40 turbo
3" exhaust, turbo back with a custom muffler, black dump style tip
kpro....

Driveline & Suspension:
tein flex all round with uprated pillowballs
j's racing roll centres

Wheels & Tyres:
stock wheels with shite tyres
also powrdercoated 16" dc5 wheels with re55s
need new wheels....

Interior:
stock...
but half cage getting built at the mo...

Sound:
Stock but getting rid of stereo

Exterior:
12000k HID's
extended nuts

maybe there is more... cant think of it at the mo...:P

not finished as yet... needs a fuel pump then its tune time..:P

**** lol

[EGBOY]

woah you've been getting busy lately Ian haha, how much you expect to make atw

unsure how much it will make.... 50 - 60kw to the treads lol
just depends on how hard the tune is pushed.... will find out on the day its tuned hehehhe prob about a month away.. will let ya know then..


farrrkk....

thats hectic....u r a dedicated owner LOL

and to think i was going to sell it ...lol

[EP3EVA]

selling my car now......22-23k

[bbds]

why u selling? sell and buy mine =)

[blk_shadow]

wooww.....ppl starting to sell their EP3's....

[bbds]

wooww.....ppl starting to sell their EP3's....

if i can sell i will, atm im just waiting on a price for a built k24 bottom end with turbo kit from A.R.T =)

[mtonep3]

i randomly met a chinese guy today, who has an 05' EP3R
damn looks alot different!

[blk_shadow]

i randomly met a chinese guy today, who has an 05' EP3R
damn looks alot different!

wow, another facelift in melb. where at??

[EP3EVA]

why u selling? sell and buy mine =)

nah, some shit come up so must sell,.......never tho i will sell that fast.

[mtonep3]

wow, another facelift in melb. where at??

his mate was buying my previous car (is200) oem stuff. and we met up in kew.. his ep3 had a few mods on it... just intake and rims. i thnik his from clayton

[bbds]

damn another ep3 in clayton =-(

[blk_shadow]

his mate was buying my previous car (is200) oem stuff. and we met up in kew.. his ep3 had a few mods on it... just intake and rims. i thnik his from clayton

oooo....personalised plate?

so many in clayton, and i only have met Julian so far..lol

[mtonep3]

Yeah...personalised plate... LL-7788.... somthing along those lines....

Any EP3R owners live near kew?

[ITRDC2]

Doncaster

[Jibz]

I'm in Caulfield, I travel to BH and the Glen alot. I will probably be going to Mt Dandenong tonight if anyone wants to join me and some friends. Will most likely start after 11 at some point.

[twing]

Envy all the EP3 owner :thumbsup:

Where do you guys get EP3 imported?

[mtonep3]

Jibz I keep seeing a ep3 around glen and bh...maybe it's you...
Mt dandy.. Damn I got work till late! :(

[subzero]

hey guys sorry to hijack this thread but is anyone looking to get rid of their wheels? lol im after a set in white in melb. pm me if u hav anything.

p.s love the rides

[intk20A]

Jesse

Bought written off ep3r from auctions

38000k's

awesome hahahaha
motor good box good yay

[EGBOY]

^^ any panels left? undamaged? interested if so

[Philip Lee]

Envy all the EP3 owner :thumbsup:

Where do you guys get EP3 imported?

carsales? IMG??

[Philip Lee]

wooww.....ppl starting to sell their EP3's....

yeah i'm thinking too.......:(

[mtonep3]

anyone here in melbourne have an ep3 with the number plate [JDMEP3]??

[blk_shadow]

yeah i'm thinking too.......:(

whhhyyy...???

[ITRDC2]

anyone here in melbourne have an ep3 with the number plate [JDMEP3]??

lol, this is the one i used to want to order, but now i have a nicer one in my mind :)

[Philip Lee]

whhhyyy...???

good question haha i have stopped thinking about it now lol

[blk_shadow]

who here got the number plate of 'SPOOND'? on the way to the city on sat night spotted at Bay street lol

[mtonep3]

egboy.......!?!

[EGBOY]

yeah that was me..... :P
prob the last week those plates will be on the car!

[blk_shadow]

are u selling the plate?

[EGBOY]

are u selling the plate?
make an offer, if its good enough i'll sell it :P otherwise prob just keep it

[ep3_ctr]

http://cgi.ebay.com/ebaymotors/XTD-STAGE-4-CLUTCH-KIT-02-06-RSX-TYPE-S-K20-6spd_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQh ashZitem2ea7a8bbacQQitemZ200381348780QQptZMotorsQ5 fCarQ5fTruckQ5fPartsQ5fAccessories

guys would this be okay for an ep3?

[bbds]

anyone with Ep3 Sth east area melbourne? nice to see you on the road :thumbsup:

[blk_shadow]

anyone with Ep3 Sth east area melbourne? nice to see you on the road :thumbsup:

did u meet Julian?

I'm from the area too LOL

[bbds]

did u meet Julian?

I'm from the area too LOL

lolz yeah i met Julian, his a hoon =)

[blk_shadow]

lolz yeah i met Julian, his a hoon =)

HAhahahahaha...!!! :thumbsup:

[KaZe86]

:confused: lmao what are you talking about man?

[blk_shadow]

not worth the conversion.

and going thru all those Vicroads thing.....I'm over it already from my EK.

[bbds]

yo steve, hows your car going? any new goodies?

[bbds]

does anyone know if its hard to install a CF boot onto the ep? I was planning on getting one to match the hood

[KaZe86]

yo steve, hows your car going? any new goodies?

its going good man! nothing new kinda broke atm lols


does anyone know if its hard to install a CF boot onto the ep? I was planning on getting one to match the hood

so ur the one that bought it grats
its not diy'able unless u know how to remove/install rear hatch glass

[bbds]

hahaha yeah, looks nice gotta get something to match.

Picking up the gramlights as well. Hope it looks sweet =)

[bbds]

new update got my rims put on today as well as the semis, here are some photos =)

http://i60.photobucket.com/albums/h18/shu84/21092009154.jpg

http://i60.photobucket.com/albums/h18/shu84/21092009155.jpg

[blk_shadow]

looks nice, man :)

I saw an EU on saturday on Princess Hwy with bodykit and 'waza' sticker at the front and rear bar, passing me, I thought it was u for a minute LOL

[bbds]

looks nice, man :)

I saw an EU on saturday on Princess Hwy with bodykit and 'waza' sticker at the front and rear bar, passing me, I thought it was u for a minute LOL


thanks man
oh thats my brother lolz!

im waiting on mugen spoiler now =)

[blk_shadow]

thanks man
oh thats my brother lolz!

im waiting on mugen spoiler now =)

o really?? LOL
not a bad looking EU. what bodykit is that? looks wide as

wow, you baller!!
I'm waiting for my J's goodies to arrive LOL

[bbds]

o really?? LOL
not a bad looking EU. what bodykit is that? looks wide as

wow, you baller!!
I'm waiting for my J's goodies to arrive LOL


lolz ummz znot sure what kit is it, i think its stock.

What parts u getting from j's?

[ITRDC2]

thanks man
oh thats my brother lolz!

im waiting on mugen spoiler now =)

copy or genuine?if copy,how much shipped?

[blk_shadow]

lolz ummz znot sure what kit is it, i think its stock.

What parts u getting from j's?

is it stock? hmm..or is it because of the wheels and its low as well....but it looks wide. LOL

white EU right?

not much yet, just J's oil cap, rocker cover, intake, and torque damper

[bbds]

is it stock? hmm..or is it because of the wheels and its low as well....but it looks wide. LOL

white EU right?

not much yet, just J's oil cap, rocker cover, intake, and torque damper


umzzz yeah his just got 18s on , does look a lil fat

yeah its white

I want a torque damper as well, but i was looking at ingalls or spoon, i wonder if any difference at all

[ITRDC2]

is it stock? hmm..or is it because of the wheels and its low as well....but it looks wide. LOL

white EU right?

not much yet, just J's oil cap, rocker cover, intake, and torque damper

Omgosh j's intake......$$$$

[blk_shadow]

umzzz yeah his just got 18s on , does look a lil fat

yeah its white

I want a torque damper as well, but i was looking at ingalls or spoon, i wonder if any difference at all

yeah, prolly thats why hahaha..

I think most torque damper does the same thing, just brand preference. the differences will be minor.



Omgosh j's intake......$$$$

hahaha..yeah, I love it but. and its rare. mine one had to be made, that's why it took a month be4 I received mine.

[bbds]

yeah, prolly thats why hahaha..

I think most torque damper does the same thing, just brand preference. the differences will be minor.




hahaha..yeah, I love it but. and its rare. mine one had to be made, that's why it took a month be4 I received mine.

what is a j's racing intake? ive never even heard of it before. Do you have a pic?

[blk_shadow]

what is a j's racing intake? ive never even heard of it before. Do you have a pic?

have a look at www.jsracing.co.jp under EP civic. or simply just google it.

my comp is too slow to load up pics LOL

[SHU-ES1]

i wish my car was the ep :P

[mtonep3]

by any chance anyone selling rays lug nuts with lock nuts? or any other branded lug nuts?

[ITRDC2]

u changed rims already???

[KaZe86]

nice rims david! i was going to get those of envoili aswell i see u got many things off him lols white and bronze ftw yo! :thumbsup: hrmm few nice ep's in melb maybe a photoshoot... ;)

[ITRDC2]

i want a shoot but i have nothing lol

[SHU-ES1]

o really?? LOL
not a bad looking EU. what bodykit is that? looks wide as

wow, you baller!!
I'm waiting for my J's goodies to arrive LOL

hey blk! that was me! were you in the ep3? i'm pretty sure i would've seen it cos i love them! hehe. what time of the day was it? i was heading back home from dave's place that day. im waiting to see a black ep3 these days, all the ones i've seen are CW. love em!

[mtonep3]

u changed rims already???

Nag I haven't changed yet. I got re01 on my stickies and don't want to waste the treads... But I have a set of te37s that came off my old is200. But these rims are 16", :( so don't know if I should put them on or sell them..And buy newish ones.. Confuzzled...
Wtb melb ep3 meet :)

[ITRDC2]

Just sell ur old rims....and yeah waiting kaze to orgainse a meet lol

[KaZe86]

yeah 16 is too small for ep3s i reackon but yeah sell them off and get new ones why u want me to organise a meet/ shoot? Lols

[ITRDC2]

Cuz ur billion boy

[mtonep3]

Just organize one... :)

[bbds]

by any chance anyone selling rays lug nuts with lock nuts? or any other branded lug nuts?



im selling rays long black nuts! let me know

[bbds]

nice rims david! i was going to get those of envoili aswell i see u got many things off him lols white and bronze ftw yo! :thumbsup: hrmm few nice ep's in melb maybe a photoshoot... ;)


hahahah thanks man, yeah definately looks much better, Mugen wing will top it off, that'll be it for the exterior for now =)

[bbds]

yeah 16 is too small for ep3s i reackon but yeah sell them off and get new ones why u want me to organise a meet/ shoot? Lols

Photoshoot for sure let me know

[blk_shadow]

hey blk! that was me! were you in the ep3? i'm pretty sure i would've seen it cos i love them! hehe. what time of the day was it? i was heading back home from dave's place that day. im waiting to see a black ep3 these days, all the ones i've seen are CW. love em!

ohh..hey how u going? LOL

It was around 11ish, I was on burke road about to exit to Princess Hwy (waiting for traffic), and you were passing by LOL. near Monash caulfield that is.

tried to chase u, but traffic held me up badly.

[KaZe86]

lols yeah mugen wing sounds interesting... hehehehe :angel:

anyways yeah ill see how we go about a meet got few things on lately

[ITRDC2]

hahahah thanks man, yeah definately looks much better, Mugen wing will top it off, that'll be it for the exterior for now =)

hey dude,u didnt answer my question before, i was asking whether urs copy or genuine, if the copy one, did u grab it from ebay?and how much thx

[SHU-ES1]

ohh..hey how u going? LOL

It was around 11ish, I was on burke road about to exit to Princess Hwy (waiting for traffic), and you were passing by LOL. near Monash caulfield that is.

tried to chase u, but traffic held me up badly.

ahh damn! i was hoping i'd be able to see another modded ep3 on the road other than my brothers. lol! you live around the area? i'll probably see you again on the road, i usually head down that way once or twice a week.


im selling rays long black nuts! let me know

oops, too late. he's sold them to me! :P


Just sell ur old rims....and yeah waiting kaze to orgainse a meet lol

if this happens, i'm coming to watch and take some photos of my own!! that would be sick!!!

[ctones]

Jesse

Bought written off ep3r from auctions

38000k's

awesome hahahaha
motor good box good yay

Hey dude... are the wiper blades still in good condition? do you need them?

[KaZe86]

Hey dude... are the wiper blades still in good condition? do you need them?

hey ctones i saw u a couple times at the car wash and around highpoint area nice clean car and its good to see a girl clean her car with passion and use a chamois! lols i was in the white ep3 with custom plates aswell :thumbsup: sorry i didint say hi... :o

[ctones]

it was actually my misses u saw cleaning my car... she use to drive my car around while i was at work... i would ask her to clean it for me normally after a rainy day...lol
yea ive seen u around...
thought i was the only one in the west... but at least im still the only black one in the west... catch ya around...

[bbds]

hey dude,u didnt answer my question before, i was asking whether urs copy or genuine, if the copy one, did u grab it from ebay?and how much thx

im getting them off a guy on here, saw his rep one. Fit perfectly no holes needed. Exactly like the real thing. I wouldnt pay 1k for a spoiler lolz

[blk_shadow]

ahh damn! i was hoping i'd be able to see another modded ep3 on the road other than my brothers. lol! you live around the area? i'll probably see you again on the road, i usually head down that way once or twice a week.


hahahhaa..

I live in Hawthorn. I usually go to clayton on saturday, so yeah. only the weekends I hit Princess HWY. :)

[mtonep3]

lol, i went to princess highway twice in a row, the past two weeks, first week there was no police around, 2nd week there was non stop cop cars...hahaha

oh blk shadow u live in hawthorn? i live in kew.... never seen your car around but..!

[mtonep3]

bbds did u get my PM?

[bbds]

bbds did u get my PM?

hey champ yeah i did but my brother wants them, if he doesnt u'll be next =)

[ITRDC2]

im getting them off a guy on here, saw his rep one. Fit perfectly no holes needed. Exactly like the real thing. I wouldnt pay 1k for a spoiler lolz

Lol,I get quoted for rep one on eBay is something 7xx shipped

[bbds]

Lol,I get quoted for rep one on eBay is something 7xx shipped

damn thats exp, im getting it for around $300 =)

[KaZe86]

it was actually my misses u saw cleaning my car... she use to drive my car around while i was at work... i would ask her to clean it for me normally after a rainy day...lol
yea ive seen u around...
thought i was the only one in the west... but at least im still the only black one in the west... catch ya around...

lmao man the guy at the car wash is like shes here 3 times a week holy fk man thats animal make her clean your car heaps anyways like i said hot car man reminds me of my black stivo!! yeah apparantly theres a gunmetal ep3 in the west side aswell yet to see it around though


im getting them off a guy on here, saw his rep one. Fit perfectly no holes needed. Exactly like the real thing. I wouldnt pay 1k for a spoiler lolz


damn thats exp, im getting it for around $300 =)

who you getting it off david? ill buy it xD i dont think it will suit your car! :p

[blk_shadow]

oh blk shadow u live in hawthorn? i live in kew.... never seen your car around but..!

I drive my car like mostly only in the weekends LOL.

was it you, like 2 weeks ago on Friday night went to Victoria gardens (IKEA)?

[bbds]

lmao man the guy at the car wash is like shes here 3 times a week holy fk man thats animal make her clean your car heaps anyways like i said hot car man reminds me of my black stivo!! yeah apparantly theres a gunmetal ep3 in the west side aswell yet to see it around though





who you getting it off david? ill buy it xD i dont think it will suit your car! :p

hahahahaha.. ill let uno soon as i get an exact price. should be very soon, then we'll get one each =)

Man my rims look almost the same as urs.. i think i need to spray them

[blk_shadow]

TAKATA Green on a CW EP3 = Hotness!!

do it people!!!

[bbds]

TAKATA Green on a CW EP3 = Hotness!!

do it people!!!

yeah thats what i was thinking hahahaa.

what do u think of dark purple? lol

any of u's think i should get CF doors and boot?

[KaZe86]

TAKATA Green on a CW EP3 = Hotness!!

do it people!!!

yeah i would love to but kinda hard to match takata greens exact colour and looking for stickers atm also


yeah thats what i was thinking hahahaa.

what do u think of dark purple? lol

any of u's think i should get CF doors and boot?

dark purples cool

cf doors and boot would be beast :thumbsup:

let me know when were how much for wing im interested aswell is it a seibon one or like replica white? plastic w/e

[bbds]

yeah i would love to but kinda hard to match takata greens exact colour and looking for stickers atm also



dark purples cool

cf doors and boot would be beast :thumbsup:

let me know when were how much for wing im interested aswell is it a seibon one or like replica white? plastic w/e


seibon is gay u'll need to drill holes to make them fit, this one will come in primer
and spray it cw, it will be pretty much perfect fit, ive seen it in person and it looks awesome

Yeah im thinking of getting CF doors and boot, would be defect straight away?

[blk_shadow]

yeah thats what i was thinking hahahaa.

what do u think of dark purple? lol

any of u's think i should get CF doors and boot?

yeah, just get cf hood and boot. doors look abit akward.


yeah i would love to but kinda hard to match takata greens exact colour and looking for stickers atm also


mix one that looks similar LOL.

the stickers are the one that puts me off. them stickers are not cheap at all...

[bbds]

yeah, just get cf hood and boot. doors look abit akward.



mix one that looks similar LOL.

the stickers are the one that puts me off. them stickers are not cheap at all...



Yeah boot is my first choice, but i wouldnt have a clue how to take the window n stuff off lol. im a bit of a noob

[KaZe86]

seibon is gay u'll need to drill holes to make them fit, this one will come in primer
and spray it cw, it will be pretty much perfect fit, ive seen it in person and it looks awesome

Yeah im thinking of getting CF doors and boot, would be defect straight away?

but seibon one is sex man!! holes are holes no big deal well let me know either way man im down!

i think cf doors would be defect not sure about boot but should be ok for boot

[blk_shadow]

Yeah boot is my first choice, but i wouldnt have a clue how to take the window n stuff off lol. im a bit of a noob

I think the easier option is to change ur rear glass with an FAL glass. lighter as well

[bbds]

I think the easier option is to change ur rear glass with an FAL glass. lighter as well

do uno where i can get it done?

[blk_shadow]

do uno where i can get it done?

I think those windscreen joint, but u'll need to order the glass from FAL, I think its from US

[mtonep3]

hahahahaha.. ill let uno soon as i get an exact price. should be very soon, then we'll get one each =)

Man my rims look almost the same as urs.. i think i need to spray them

Hook us up with one too man.....hahaha

and blk shadow...that wasnt me on friday night.... but two fridays ago when i was at princess, i spotted 3 different EP3s, one of the guy i randomly met few weeks ago driving the 'other' face lift ep3....

[bbds]

but seibon one is sex man!! holes are holes no big deal well let me know either way man im down!

i think cf doors would be defect not sure about boot but should be ok for boot

yeah holes are holes but not on the boot lid itself lolz

[KaZe86]

yeah holes are holes but not on the boot lid itself lolz

not sure where your coming from? what holes needed to fit a seibon spoiler?

[mtonep3]

Cool another eastsider :). Where abouts on the east??

I goto aj car care in Clayton. Top place :)

[mtonep3]

ohh nice...shud see you around BH soon then..yeh?
AJ automative actually....(not car care)

[ITRDC2]

hey did u hoon with a nissan(not sure) @ doncaster road last night?

[mtonep3]

nissan pulsar SSS?
yeah i think so...hahahaha, i was i had just came off the free way...

[ITRDC2]

lol,i was just about to turn into high street from fwy lol.

[mtonep3]

lol what a conincidence...were u like behind me or somthing??? i was going to drop by PP for abit before i went to my GFs house which is near high st.

[ITRDC2]

nope not behind...u and the other white car was dragging to pp direction, and i turned into high street

[bbds]

u guys are hoons =)

[mtonep3]

im sure were all hoons...sometimes :)

[SHU-ES1]

anyone have a black ep3 here?

[KaZe86]

anyone have a black ep3 here?

ctones is the only one i know of which is around the highpoint area

rest is cw lols

[mtonep3]

anyone selling their aftermarket exhaust, or want to sell their aftermarket exhaust??? :)

[bbds]

anyone selling their aftermarket exhaust, or want to sell their aftermarket exhaust??? :)

did u want Fuji RM01a

[mtonep3]

that is one i was originally interested in, if you selling it, PM ME :)

[jt2k]

Test drove an EP3 today at a dealership, and im very happy with it,
If i decide to get one, ill be joining you buys, :)

[ITRDC2]

where ?ssv?

[ctones]

got all rear badged last nite... yay!! in front of my house too... oh well thats what you get for living in the west and parking your car outside every night.. lasted about 6 months without anything happening..

tossing up if i should replace all of them.. type r, civic n uk badge or just replace the rear red H alone... sigh... thought badging was old... damn kids! lol

any recommendations on removing all the sticky stuff left over from the badges?

[KaZe86]

got all rear badged last nite... yay!! in front of my house too... oh well thats what you get for living in the west and parking your car outside every night.. lasted about 6 months without anything happening..

tossing up if i should replace all of them.. type r, civic n uk badge or just replace the rear red H alone... sigh... thought badging was old... damn kids! lol

any recommendations on removing all the sticky stuff left over from the badges?

holy shit!! that sucks damn i thought people stop badging these days... i reckon replace them gives it that better look or even just the type r badge dw about civic and uk flag

to get the sticky stuff off use metho or terps and your a cloth to rubb it off

i live in the west side but always garaged!! dont trust it outside tbh!!

[ctones]

thanks man... yeah i use to keep it garaged... but then we got a baby in the house to i had give up my car spot for the family car with the baby seat in it.. lol

i emailed honda for the rear red honda H... said its $90.95...

that's oddly expensive? i assumed it was about $50... thats how much the rear red dc5 H cost for my mate who got it from honda...

[SHU-ES1]

you can find original ep3 red H on ebay, i bought front and back for about $100 shipped to melbourne. when i stuck them back on, i used epoxy glue on it so that its harder to take off but if they did, i think they would do some damage to the paint job for sure. bad luck on the badging :( good luck buying some new ones!

[ctones]

man.... i just checked out ebay... only the front ones are available... =( DENIED!

anyone got any recommended websites that you've purchased from?

[KaZe86]

thanks man... yeah i use to keep it garaged... but then we got a baby in the house to i had give up my car spot for the family car with the baby seat in it.. lol

i emailed honda for the rear red honda H... said its $90.95...

that's oddly expensive? i assumed it was about $50... thats how much the rear red dc5 H cost for my mate who got it from honda...

yeah man i know how u feel lols when my sister comes over and im not home she parks in the garage and im like WTH?!?! but yeah have to cuz theres a baby aswell lols dont want the baby to get sick do we... lols

anyways yeah honda AU is expensive as!! try ebay heaps of badges and stuff still expensive but not as much

[mtonep3]

The badges come on and off on eBay. Spend some time lookking and waiting you'll find some! My type r badge got debadged the first week I got my car, and I live in suburb with one of the lowest crime rates in melb. I know how you feel, good luck though! :)

[ITRDC2]

man.... i just checked out ebay... only the front ones are available... =( DENIED!

anyone got any recommended websites that you've purchased from?

only if u can search more detail:)

http://cgi.ebay.com/ebaymotors/SPOON-JDM-GENUINE-REAR-RED-H-Emblem-Civic-Si-EP3-02-03_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhas hZitem588387feffQQitemZ380163849983QQptZMotorsQ5fC arQ5fTruckQ5fPartsQ5fAccessories

[bbds]

hi, sorry to hijack but does anyone know if 235's will fit on 7.5 wheels?

[ctones]

only if u can search more detail:)

http://cgi.ebay.com/ebaymotors/SPOON-JDM-GENUINE-REAR-RED-H-Emblem-Civic-Si-EP3-02-03_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhas hZitem588387feffQQitemZ380163849983QQptZMotorsQ5fC arQ5fTruckQ5fPartsQ5fAccessories

sorry man.. thanks for finding it for me...

cheers dude!

[Jibz]

i ordered all my badges from super gt. they were really helpful, i had to order the front, side and rear type r badges/stickers and the civic and uk flag badges. the previous owner removed all of those, leaving only the red H on there. all up for the 6 badges it was 250 incl shipping

[pair08]

Hi guys,

This is for you boys that have the Injen CAI, is it possible someone provide me with the part number of the CAI. Wondering if the US Spec Si CAI would fit into our JDM EP3's.

Cheers :)

[KaZe86]

Hi guys,

This is for you boys that have the Injen CAI, is it possible someone provide me with the part number of the CAI. Wondering if the US Spec Si CAI would fit into our JDM EP3's.

Cheers :)

cant find the box but yeah im pretty sure that the us spec si fits our ep3 becuase the injen cai is made in the us so therefore it should fit lols i hope... ahahaha :thumbsup:

[pair08]

cant find the box but yeah im pretty sure that the us spec si fits our ep3 becuase the injen cai is made in the us so therefore it should fit lols i hope... ahahaha :thumbsup:

thanks mate

it's just coz i emailed a couple of the ebay sellers and their like yeah yeah it fits. then i emailed injen directly and they said we need the euro version (wtf?)

but at 350 its fair bit cheaper then anything offered in aus :(

decisions decisions...haha

[bbds]

thanks mate

it's just coz i emailed a couple of the ebay sellers and their like yeah yeah it fits. then i emailed injen directly and they said we need the euro version (wtf?)

but at 350 its fair bit cheaper then anything offered in aus :(

decisions decisions...haha


make an offer on this one do 235, cause i did and they accept it =)


http://cgi.ebay.com/ebaymotors/02-05-Honda-Civic-Si-Injen-Cold-Air-Intake-SP1576P-EP3_W0QQcmdZViewItemQQhashZitem48342a2f61QQitemZ31 0112825185QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAcce ssories

[pair08]

haha seems like your the man for everything :P

did you have any issues with fitment etc?

[EGBOY]

hey guys, if you know any1 wanting to buy an ep3 send them my way!!!! going to get rid of it :S

[toneemee]

really not much ep3 in melb, just got one, wonder where i could find some good parts locally other than order from jap... any advise guys?

[mtonep3]

I find it easiest to message some traders and they could help you get it from japan. Other than that don't think there's much local shops that have ep3 stuff in stock.

[Philip Lee]

some of the DC5 stuff fits our car but traders are the main supplier i guess.

what parts do u want?

[ep3_ctr]

guys the aus spec dc5 clutches, are they fine with our cars?

[denrie]

guys the aus spec dc5 clutches, are they fine with our cars?

Yeah they fit EP3R's.

[mtonep3]

any melbourne ep3rs interested in for a meet??

[bbds]

any melbourne ep3rs interested in for a meet??

yups i dont mind

[blk_shadow]

yeah, sounds good too.

at least we can know each other better :D

[mtonep3]

Where would be a good place to have one?? Any suggestions ??
It's pretty good weather now.. I think it's an awesome time before it gets too fricken hot!!

[pair08]

nooo... wait till i get my car. its arriving in brissy on the 9th should be ready early Dec :P

exams are such a bitch lol

[blk_shadow]

bloody weather is starting to really warm up. getting 30 and up starting saturday.....NOOOOOOOO...!!!!

[pair08]

what insurance you boys running?

JCI?

[mtonep3]

yep just cars....
$1500 premium
$2300 excess fml.

[veecee]

Anybody else with info on insurance in Melb? Thx.

[ITRDC2]

with jci for 999 comprehensive

btw can anyone tell me whether ur gonna tell ur insurance that about your mods?

[mtonep3]

I will tell my insurance about mods I have done. Don't wana get fkd over and let them give any excuses to not repair, if/when I claim somthing..

[mtonep3]

Btw melb meet @ end of this month? I'm thinking bout a meet in eastern suburbs because I know a most of us are around the east.. What u guys think???

[pair08]

doubt i'll make it, car arrived in brissy today so compliance and what not won't be done until at least 1x Dec T_T

[mtonep3]

How come u purchased your car from brissy?? How much if u don't mind me asking..

[pair08]

lol, na its being imported from japan but its getting off the boat in Brissy and getting carted down to Melbourne coz it was faster lol then waiting for a boat to Melb.

[veecee]

Thanks for the info on insurance. I stayed with JCI but premium came down from about $1350 to a tickle under $1k - just from moving from Sydney to Melb. Nice...

[blk_shadow]

if so, lets make the meet on the 5th of December or smthg. I prefer weekend...:D

[mtonep3]

LOL dont we all prefer weekends !!!
but how many EP3Rs in melb actually active here?

[ep3_ctr]

i am :D

[blk_shadow]

So lets make it the 5th of dec? I think,it doesnt matter how many ppl r active,i guess we just meet with the active ones first lol

[pair08]

car will still be in shop :(

it's okay i'll just advocate a Jan meet too loll

[mtonep3]

Yeh blkshadow sounds good. What's the location?
I reakon evening meet will probably be the best, spesh in this weather

[blk_shadow]

location is tricky....try to find a big open space area...
any idea?

[mtonep3]

No idea.. Where do people usually have meets anyway?? Glenwaverly seems like the most common pllace ><

[blk_shadow]

Glen waverley is full of cops and hoons tho lol. What about the multi storey carpark at ikea? Just in case it rains as well. Prolly start the roll call?

[mtonep3]

Which multi level car park ikea??
Roll call :)
1. Mtonep3

[blk_shadow]

The Victoria Garden's IKEA at Richmond

Roll call :)
1. Mtonep3
2. Blk_Shadow

hmm...not sure if we should create a separate thread, since not many users are visiting this thread anymore by the looks of it? LOL

[mtonep3]

lets make it december 12th or 13th evening...
it will give us some more time to notify people..what u think about date?

[pair08]

if you can hold it one more week i might be able to make it. car went into compliance today woot!

as for meet ideas. what about donny pp

[typeRr]

should come to highpoint or something, ill come if its there :)

[mtonep3]

Lol high point.. Prob get harassed by ssome lebz haha
Donny pp is ok, spesh for small group, we can prob go there then go shoppingyown car park for photos or somthing..

[blk_shadow]

Yeah,i dont want this meet to attract any unwanted attention. Donny pp is ok,or even boxhill underground carpark.
Yep,i'm ok with the date.even the week after the 19th or smthg :-)

[pair08]

19th ftw!

get to finally see my car on thursday in the metal...

what a wait lol

who's going to see misa campo on thursday ^_^

[mtonep3]

Lol misa campo. Saw her last time I think one or twoo years ago at billboards. Nothing special but she does look nice irl.. But nah, no clubbing for me these days.. Stay home save money to mod the car:D hahah...
Hey adwin, you know someone with blue evo7, called sam?? I think you met him awhile ago at otr..

[blk_shadow]

Lol misa campo. Saw her last time I think one or twoo years ago at billboards. Nothing special but she does look nice irl.. But nah, no clubbing for me these days.. Stay home save money to mod the car:D hahah...
Hey adwin, you know someone with blue evo7, called sam?? I think you met him awhile ago at otr..

Lol yeah,i dont go clubbing as well to b able to mod the car.
Oh,r u sam's friend? We're trying to meet up since,but always got smthg on lol.

Cant wait to c melb's ep3 :-)

[pair08]

OMG @%#@

I finally drove the car today. Compliance shop have been tops.

Getting new tyres tomorrow should be on the road in time for the meet ^_^ (if its on the 19th :P)

[mtonep3]

Haha yeah I'm also excited lol.

Sams good mate of mine, I wash car with him all the time. I'll tellhim to buzz u next time ey.

Btw saw another fl ep3 today in Richmond. With top one sticker on the front window..

[mtonep3]

OMG @%#@

I finally drove the car today. Compliance shop have been tops.

Getting new tyres tomorrow should be on the road in time for the meet ^_^ (if its on the 19th :P)

Hahaha how was seeing ur car in the flesh? cream ur pants much?? haha

[pair08]

Hahaha how was seeing ur car in the flesh? cream ur pants much?? haha

pretty much lol

one negative but, it's got a aftermarket lsd and the thing is so fkn clunky you can hear it from a street away.

apparantly its normal. gotta get it checked out.

other then was pure porn ;)

[mtonep3]

What other stuff came with car??

[pair08]

lsd, cr-kais, coilovers

[itzdoe]

hi guys! im new comer. just got my ep3 three weeks ago.

name: Aldo
cars: 2002 EP3 Civic Type-R in Championship White (yeah!!)

Totally Stock. lol.

planning to get some upgrades and tuning, anyone knows? i'm looking for some hondata kpro?

[itzdoe]

any melbourne ep3rs interested in for a meet??

lets meet up guys!

[ITRDC2]

is ur car with re01r?if so i think i saw ur car passing by china town?

[mtonep3]

alot of fresh ep3s come over with re01rs

[blk_shadow]

OMG @%#@

I finally drove the car today. Compliance shop have been tops.

Getting new tyres tomorrow should be on the road in time for the meet ^_^ (if its on the 19th :P)

hahahaha..:thumbsup: nothing beats driving a new car for the first time :D


Haha yeah I'm also excited lol.

Sams good mate of mine, I wash car with him all the time. I'll tellhim to buzz u next time ey.

Btw saw another fl ep3 today in Richmond. With top one sticker on the front window..

yeah bro, call me. usually I wash at Spencer st just before Dynon road up there. :D


hi guys! im new comer. just got my ep3 three weeks ago.

name: Aldo
cars: 2002 EP3 Civic Type-R in Championship White (yeah!!)

Totally Stock. lol.

planning to get some upgrades and tuning, anyone knows? i'm looking for some hondata kpro?

Welcome bro, more and more EP3's now in Melbourne....should be a good meet!:cool:

[mtonep3]

cool :D
now we confirm date...
19th is good?
how about location... i reakon ikea VG is a good idea, its quite central for most ppl. good parking lot to take pics. :)

[itzdoe]

is ur car with re01r?if so i think i saw ur car passing by china town?

nah, mine is totally stock, lol. im saving up to buy some new rims and tyres, hopefully next year. looking for Enkei RPF-1 or Rays RE30 with some Advan AD08 or Falken FK452 rubber on it. Anyone knows where i can get it? better if someone has a seconhand rims, lol. as long as it still in a good condition tho..

[pair08]

cool :D
now we confirm date...
19th is good?
how about location... i reakon ikea VG is a good idea, its quite central for most ppl. good parking lot to take pics. :)

Roll call
1. Mtonep3
2. Blk_Shadow
3. pair08 (provided i have my car :P)

VG is fine for me too. Unless everyone coming is on th east loll

[mtonep3]

I think there's someone sell rpf1 on parts for sale thread, have a search..

[typeRr]

highpoint aint that far, everyone would be froffing nuts. comon boys and girlss, ill come if its at hp. BTW what mods you guys got on your car?

[mtonep3]

highpoint aint that far, everyone would be froffing nuts. comon boys and girlss, ill come if its at hp. BTW what mods you guys got on your car?

hey Richmond Vic gardens like centre of everyone :)

[blk_shadow]

I had a bad experience in my ek at highpoint. So its kinda hard for me to go back there,unless if i have to.

[KaZe86]

I had a bad experience in my ek at highpoint. So its kinda hard for me to go back there,unless if i have to.

weak ads!? what happen lmao?

[itzdoe]

Roll call
1. Mtonep3
2. Blk_Shadow
3. pair08 (provided i have my car :P)

VG is fine for me too. Unless everyone coming is on th east loll

roll call.
4. itzdoe

[mtonep3]

Sick let's make this happen!!!

[typeRr]

alright cool. have a great day guys

[blk_shadow]

weak ads!? what happen lmao?

I parked my car there for an hour in the afternoon at 12pm. and got back to see a nice 'S' shape keyed mark thats deep and long enough for me to unable to buff it away and for people to easily notice it from afar. :thumbdwn:

plus my EK was black. so yeah....you can tell how unhappy I am and gonna kill the f*cker if I ever found him. even tho I've sold my ek now LOL

[pair08]

I parked my car there for an hour in the afternoon at 12pm. and got back to see a nice 'S' shape keyed mark thats deep and long enough for me to unable to buff it away and for people to easily notice it from afar. :thumbdwn:

plus my EK was black. so yeah....you can tell how unhappy I am and gonna kill the f*cker if I ever found him. even tho I've sold my ek now LOL

unlucky mate.

my current daily (CRV) has a nice long line bout 1m, copped it at knox T_T