EG5 Boosted B16A Prep For The 1/4 Mile @ The Creek

[Lukezen27]

Hey Guys

Here's a few photos I've my newly de-body kited EG5 ready for the 19th

Removed
2 x 6" Rear speaks that didn't work anyway
All sound damping padding from behind both
Body kit front bumper
Body kit side skirts
Body kit down force rear wing

Before Shot
http://www.scruffie.com/luke/car/b16a/eg_new_wheels_sig.jpg

After Shot
http://www.scruffie.com/luke/car/b16a/creek_prep/b16a_back_to_stock_side.jpg

Done back shot
http://www.scruffie.com/luke/car/b16a/creek_prep/b16a_back_to_stock_back.jpg

The removal
http://www.scruffie.com/luke/car/b16a/creek_prep/b16a_back_to_stock_middle.jpg

To much work to do the front bump in one day with all the cutting needed for the FMIC and piping

Time I plan to smash :)
http://www.scruffie.com/luke/car/b16a/creek_prep/13.8sec_run2.jpg

[bennjamin]

next gotta raise that rear to the max mate :)

[beeza]

Nice one,but damn I'm a bit suprised you haven't stripped her as much as possible by now! :)

[SHOGUNOVDDRK]

Or dump the front lower....

[RR-04-RR]

Looking good luke...
going to be leaving the way it is from now on?

i'm prepping up too lol check out the pics in the event thread

[Lukezen27]

Looking good luke...
going to be leaving the way it is from now on?

i'm prepping up too lol check out the pics in the event thread


Not sure man

I still love that body kit.. :o

Once I paint the side skirts and the stupid black line on the bottom of the bumpers red I'll see

Plus add a Spoon style lip to the stock front bumper


Nice one,but damn I'm a bit suprised you haven't stripped her as much as possible by now! :)

Yeah but I'm lazy beeza


next gotta raise that rear to the max mate :)

We did Ben :)

You just got'a help me install the rear engine mount........

[beeza]

O,haha,Ok,me too,hehe :)

[RR-04-RR]

Not sure man

I still love that body kit.. :o

Once I paint the side skirts and the stupid black line on the bottom of the bumpers red I'll see

Plus add a Spoon style lip to the stock front bumper



Yeah but I'm lazy beeza

haha fair enough

yeah i like the bodykit on it too

my opinion would be to have the bodykit on.. but the stock bumpers gives it a stealth look

[Lukezen27]

haha fair enough

yeah i like the bodykit on it too

my opinion would be to have the bodykit on.. but the stock bumpers gives it a stealth look

Plus the stock bumpers are about half the weight man

If that kit came in plastic like that stocky I'll leave it on for sure

And I'm a bit on the old side for body kits hahah

[Nepolian]

Plus the stock bumpers are about half the weight man

If that kit came in plastic like that stocky I'll leave it on for sure

And I'm a bit on the old side for body kits hahah

Sh!t yeah, old man! I think ur older than me lol! Ditch the body kit and stop being a tryhard!

** :) **

[Lukezen27]

Sh!t yeah, old man! I think ur older than me lol! Ditch the body kit and stop being a tryhard!

** :) **

Sounds to me like someones scared George!!

[Nepolian]

Sounds to me like someones scared George!!

Never scared, I like a challenge!

[OMG.JAI xD]

Should move youre front license plate.

Covering your shiny metal thing behind it.

[Lukezen27]

Should move youre front license plate.

Covering your shiny metal thing behind it.

Dome

Missed that one :o

Cheers mate

[Lukezen27]

Fok it

Nearly out of light and I'm not finished with the front bumper :(

I started at 1:00 and assumed that would be long enough!!!!!!!!

[Nepolian]

Fok it

Nearly out of light and I'm not finished with the front bumper :(

I started at 1:00 and assumed that would be long enough!!!!!!!!

If you spend less time talkin and more time doin, you'd be done! :rolleyes:

[Lukezen27]

If you spend less time talkin and more time doin, you'd be done! :rolleyes:

Was already to late...

Mugen front bumper back on for now...

Some much foking round with the Front mount and piping

[Lukezen27]

Finally finished :eek:

Took all day as the intercooler piping needed moding

http://www.scruffie.com/luke/car/b16a/creek_prep/Stock_front_bumper.jpg


http://www.scruffie.com/luke/car/b16a/creek_prep/Stock_front_bumper2.jpg

http://www.scruffie.com/luke/car/b16a/creek_prep/Stock_front_bumper3.jpg

Clearly I'll need a Mugen/Spoon lip to hide the intercooler sticking out the bottom :p

[Nepolian]

Looks good mate! Need to paint that cooler black/grey for that sleeper look!

[Lukezen27]

Looks good mate! Need to paint that cooler black/grey for that sleeper look!

Its black on the other side man but I don't care for the sleeper look :p

Needs the lip big time and one for the back might been nice...

[mocchi]

isnt black painted intercooler function better? read it somewhere i forgot.

[Lukezen27]

isnt black painted intercooler function better? read it somewhere i forgot.

Nope worse man

If its painted that is..

I anodized ones are fine

[[ricer]]

i prefer your car with the bodykit

maybe will look good lower with a lip

[Lukezen27]

;2404738']i prefer your car with the bodykit

maybe will look good lower with a lip

Man I love that kit but its heavy as hell plus fiberglass brakes like every second day lol

Wish I could afford a real ABS Plastic body kit :p

[Limbo]

ur intercooler looks pretty low luke, also i'd opt for the black intercooler, less of a hoon look. Just a light coat of GMH black

[Lukezen27]

ur intercooler looks pretty low luke, also i'd opt for the black intercooler, less of a hoon look. Just a light coat of GMH black

Na man

Its already black on the other side Hao

Yup it low but that's where it has to go.. the lip should cover it ;)

[Limbo]

flip it around then!

[bennjamin]

i say black it , and fit another bumper without the middle cut out. should look just like stock = FTW

[Lukezen27]

i say black it , and fit another bumper without the middle cut out. should look just like stock = FTW

No chance in hell, Benny boy

I stared like that but kept cutting and testing till the whole front had to be removed

I like the look anyway once I have a nice little lip on there..

When can we do my mount Ben?

Last thing I need done...........

[bennjamin]

got job at 4pm-6pm today , or same again 2mrw. Pick your day boss :)do you have WED off again ?

[bennjamin]

No chance in hell, Benny boy


ps i got a spare bumper you can have for free in black dude. You just gotta respray for that oem look lol. But its in decent condition and has the original ribbing across the middle section too.

[Lukezen27]

got job at 4pm-6pm today , or same again 2mrw. Pick your day boss :)do you have WED off again ?

I can make it to your house round 5;45pm tomorrow Ben

nope don't have Wed off dam it

[lookingforboost]

looks good man :) but i reckon you should get some more racy style rims next :P

[Lukezen27]

looks good man :) but i reckon you should get some more racy style rims next :P

I just got those rims Ryan :o

Took me months to find 15" that fit ITR calipers lol

[lookingforboost]

I just got those rims Ryan :o

Took me months to find 15" that fit ITR calipers lol

ohh you have ITR calipers hmm makes it harder then :D sorry

[B16]

I really like it Luke :) smash that time bro, I'm chasing it on wednesday (fingers crossed)

[Lukezen27]

I really like it Luke :) smash that time bro, I'm chasing it on wednesday (fingers crossed)

Hell yeah Matt

Hoping for low 13s :thumbsup:

You should be able to smash your last time :p

[bennjamin]

lets get that rear mount done 2nite luke.....and any other shit we can take off for weight reduction lol

[Lukezen27]

lets get that rear mount done 2nite luke.....and any other shit we can take off for weight reduction lol

Sweet man

So wounder what RPM dump the excedy sports organic can handle?

[VTi_b0i]

sports organic? lol thats what i hav too... i duno how long itll last the way u drive man lmao

[VTi_b0i]

i say black it , and fit another bumper without the middle cut out. should look just like stock = FTW

like mine? :D i just picked up a new bumper aswell to tidy it up a little more as the mechanic hacked out a little too much lol

[Lukezen27]

sports organic? lol thats what i hav too... i duno how long itll last the way u drive man lmao

hahah what! who me...

Are you coming tomrrow night Christian?

[VTi_b0i]

nahh u cant man sorry. i work nights now :S i start at 1am and finish about 9-10am LOL so i go to bed about 8 and wake up at 12 lol
when ive been working there a while, and have my LSD ill arrange a nyt off dude

[Lukezen27]

Just a quick update!

Looks like the prep work has paid off :thumbsup:

13.685 @ 107.32MPH even with a crappy 2.303 60 footer :p
http://www.scruffie.com/luke/car/b16a/13.6sec_run2.jpg


Not sure I'll get much better with only 150kw

http://www.scruffie.com/luke/car/b16a/creek_prep/wsid_29th_08.jpg

[VTi_b0i]

well done luke :p i hope to get about 13 flat or a high 12 when i finally make an appearance haha

[RR-04-RR]

Not sure I'll get much better with only 150kw



Oh you will with your new addiction..

low 13s... here "we" come:) :p

[Lukezen27]

Oh you will with your new addiction..

low 13s... here "we" come:) :p

Hell yeah :thumbsup:

[SLOWEGG]

What RPM are you launching at? Try 5000rpm and ride it abit should lower the time heaps more.. bout a 13.0 or even high 12 is possible.

[Lukezen27]

What RPM are you launching at? Try 5000rpm and ride it abit should lower the time heaps more.. bout a 13.0 or even high 12 is possible.

Not really launching as anything over 3k I loss traction lol

[YBOOST]

EG with 150kwatw and slicks you should see 12s

[Lukezen27]

EG with 150kwatw and slicks you should see 12s

Not sure about that...

150kw na sure but boosted power hm

[SLOWEGG]

Not really launching as anything over 3k I loss traction lol

Just set your car up right and dont plant your foot straight away, pre load and ride it abit. I ran the same clutch on my car and it held up fine, 2.0 60fts on normal tyres!

[Fly-Rice]

What do you mean by Pre load?

[Lukezen27]

What do you mean by Pre load?

Have your peddle at the friction point while your hand brake holds you back as you rev