Suspension NOISE

[craigosrepz]

93 Eg Civic H/B B16A2 Turbo

Problem is I put some super low RsR springs an shocks in my civic an sits real low in the front an when driving in a straight line the CV or something in that area makes a grinding/squeeking noise on the drivers side only its like the drive shaft isn't all the way in properly.

Only in a straight line it makes that noise as soon as you turn either way the noise goes away.

It has got 330mm slotted rotors instead of the standard brakes if that makes any difference.

Ive put Low king springs in the front an the noise isn't there now but any suggestions or ideas on what the problem would be would be appreciated.....

[bennjamin]

possibly driveshafts are rubbing against brake lines....check

[outatime]

it could also be the rsr spring's coils rubbing against each other

[craigosrepz]

I've had a look an doesn't seen like anythings rubbing will check again..
Its quite loud too very noticable. Is it posible that the CV shaft is to short? in some way?

[Limbo]

wheel rubbing against the shock strut? i've seen it happen when they are dumped too low with wide tyres

[craigosrepz]

After all the head scratch an knuckle grinding its alot easier to leave the lows in with me an the missus in the front it sits just as low when the super lows without the noises so problem solved an apon closer inspection there was a few things rubbing.

Thanks for the suggestions