jdm b18cr

[ekfour97]

hi, just installed JDM b18cr into ek.will post up thread with details soon . I believe speed restrictor will be set at 180kmh.i plan on tracking car next year and will be doing i/h/exhaust, so what do people think will be the best / most economical way of removing the restrictions.thanks

[Chi]

Get aftermarket ECU or someone who knows how to remove the speed limiter on the ecu.

[DLO01]

Aye, get aftermarket Ecu and get it all tunned. Kill two birds with one stone.

[ekfour97]

thanks,been looking at hondata,neptune,motec ecus , very pricey..can the speed limiter be removed in my factory ecu can it?

[Mr_will]

why do you want the speed limiter removed?

[ekfour97]

bcoz the back straight at mallalla is a lot faster than 180

[MikeyG]

? a scooter goes faster thena b18cr should of bought that!

[ekfour97]

i certainly hope not...otherwise should have.could be fun...picn up car tom will see how it goes,went with seeker

[The Prodigy]

ye, dont forget to put the pics up when you get it tomorrow.

[burner42]

how much did it cost you? If you don't mind me asking.

[ekfour97]

will do a thread if all goes well

[ECU-MAN]

get an AUDM ECU. that will be your cheepest option


you cant remove the speed limmiter from the OBDIIa ECU unless you use an ad on device.

I know of a few people that have had a go at mallala and they didnt hit the limmiter on the straight in JDM type R powered cars

[ekfour97]

yeah thanks will have ago at mallalla very soon and see 1st of course.been there once had a ball..was sure i got over 180 but then again was only looking at road

[aussiemale]

The street limit is 100 km/h

[ECU-MAN]

The street limit is 100 km/h

Mallalla is a race track