View Full Version : EJ8 seats
VTECnique
18-08-2009, 09:15 PM
Is there a difference comfort, design & structure wise between an EK1 & EJ8 front seat??
henrygiang
18-08-2009, 09:47 PM
Is there a difference comfort, design & structure wise between an EK1 & EJ8 front seat??
it should be a different design since the ej8 is coupe and when you pull the side lever, the passenger side seat usually goes all the way forward to let passengers in. this is only applicable on the passenger side though.....drivers side it doesnt happen. dont this this happens in sedan but not exactly sure
MikeyG
18-08-2009, 10:12 PM
waste of money... if you difference and comfort and on a budget get ek4 seats mate
sw1fty
18-08-2009, 10:57 PM
it should be a different design since the ej8 is coupe and when you pull the side lever, the passenger side seat usually goes all the way forward to let passengers in. this is only applicable on the passenger side though.....drivers side it doesnt happen. dont this this happens in sedan but not exactly sure
sedans have 4 doors ;)
yeah they look pretty much the same apart from this sliding on the passenger side
EK1.6LCIV
19-08-2009, 07:01 AM
get EM1 or EK4 seats, as the oem EJ8 ones are the same as EK1 items in terms of build and comfort
least with the EK4 or EM1 seats you have adjustments that can be made :)
J_Phongsavan
27-08-2009, 08:56 AM
different trim look on the front seats between the EJ8 and EK1 but same structure. EK1 seat trim is a lil hard then the EJ8 because of the material.
EK4 front seats has the best material is like the same as the recaro centre trim in the middle, comfort and design esp the colour of the trim and the square headrest lol.
get EK4 seats mate, trust us...
VTECnique
27-08-2009, 04:44 PM
I am also looking into getting GSi DC2 front seats...
SiReal
27-08-2009, 04:45 PM
funny ryan. comparing my ek1 sedan seats with my ej8s, the ej8s seemed to over so much more support. the ek1 seats were just crap.
EK1.6LCIV
27-08-2009, 06:33 PM
lol both ek1 and ej8 seats are very unsupportive, good for long trips on highways to nsw or something but nothing else lol
J_Phongsavan
27-08-2009, 07:26 PM
if you're thinking of getting GSI integra front seats, you will have to change the rails as if only fit direct on EGs and yes other DC2s. you will need EK/EM/EJ rails. but GSI seats dont look as good, the whole material is thin and it looks plain.
VTECnique
27-08-2009, 08:45 PM
i only need to swap out the inner rails of the DC2 seats fir a 6th gen...
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.