OZHONDA official 1/4 time slip thread LOOK POST

[bennjamin]

Here is Ozhondas official 1/4 mile database.

Browse through here for all the official recorded 1/4 runs of our fastest cars thru to daily bish bashers :) (HONDA's ONLY)

You must use this template , copy and paste and fill out to the best of your ability. You must also attach an image/scan of your time slip or your post WILL be removed.

Note that we mean attach by using the Ozhonda forum attachments feature by clicking the "Manage Attachments" button when making a post. Do not display the full time slip image as it clutters up the thread. Only allow the thumbnail to be shown!



Car:
Vehicle weight W/O driver:
Engine/setup/modifications:
Driven tyre type:
-------------------------
R/T
60ft
E/T
MPH/KMh
*Insert timeslip image as an attachment thumbnail ONLY*



All unrelated chit chat will be treated as spam , repeat offenders will be infracted and ultimately banned so keep this thread clean.

IF you have any queries , ideas or improvements RE this thread , please PM MYSELF and do not reply in this thread.

[bennjamin]

first example

car
93 honda civic
vehicle weight W/O driver
980kg
engine/setup/modifications
STD b18c7 , STD ecu , engine , intake STD exhaust JDM 4-1 header
driven tyres type
bridgestone RE001 @20psi

-------------------------

R/T .527
60ft 2.180
E/T 13.851
MPH/KMh 102.08mph / 164.29kmh




video of said run
http://www.youtube.com/watch?v=G52PXx7xHNM

[Rai-C]

car
02 EP3 Civic Type R
vehicle weight W/O driver
?? didn't get weighed, but about 1200-something?
engine/setup/modifications
Stock K20A, no modifications
driven tyres type
Kumho Ecsta SPT @ 15psi

-------------------------

R/T 1.166
60ft 2.316
E/T 14.666
MPH/KMh 96.09 mph / 154.64 kmh

http://i28.tinypic.com/rjfb6s.jpg

[rayb3na_]

car
EG5

vehicle weight W/O driver
960kg's

engine/setup/modifications
unopened k20z/rbc/68mmTB/3inch exhaust/drag intake with stack

driven tyres type
195/50/15 bridgestone re001

-------------------------
R/T 0.469
60ft 2.043
E/T 13.027
MPH/KMH 107.19

http://i188.photobucket.com/albums/z256/rayb3na/SNC00160.jpg

[zco]

car EK4
vehicle weight W/O driver
stock - minus rear seats + passenger seat
engine/setup/modifications
stock/intake/coilovers
driven tyres type
some el cheapo firestone tyres 195/55/R15 on 22psi
-------------------------
this was my first time at WSID

R/T: 1.165
60ft: 2.301
E/T: 14.790
MPH/KMh: 91.17 mph

http://img237.imageshack.us/img237/3393/0412040007iy0.jpg

[RR-04-RR]

Car
2001 Honda Integra Type R (DC2)
Vehicle weight W/O driver
1050kg
Engine/setup/modifications
B18C7 - Custom CAI, Tri Y Headers, Hi-Flow Cat, Standard Exhaust
Driven tyres type
205/50/15 Toyo R888 Semi Slicks at 18psi

-------------------------

R/T 0.368
60ft 2.078
E/T 14.065
MPH/KMh 96.40/155.14

http://img43.imageshack.us/img43/2175/dsc0121bzy.jpg

[Lukezen27]

Car:
1993 Honda Civic EG5 Hatchback
Vehicle weight W/O driver
1060kg
Engine:
Unopened JDM B16A SiR 2
Setup: TEIN SS Coilovers
Modifications: Custom Turbo Kit
Driven tyres type:
Bridgestone RE001 @20psi

-------------------------

R/T .824
60ft 2.117
E/T 13.287
MPH/KMh 106.65MPH / 171.63KPH
Time Slip (http://luke.scruffie.com/13.28sec_run.jpg)

Power Dyno @ 9psi
Dyno Slip (http://luke.scruffie.com/161.4kw_psi.jpg)


http://www.youtube.com/watch?v=NZc1_i_NzrA

[A.C.S DRAG]

Ccar
89 Honda Crx

vehicle weight W/O driver
900kg

Engine

D16 turbo

Engine/setup/modifications
28psi Boost.

Tyres
Mickey T slicks

Slip

R/T .430
60ft 2.139
E/T 11.966
MPH 128.3

http://www.crxaustralia.com/Jons/slip.jpg

[EG5]

car
92 Honda Civic EG hatch ( EGK24A )

vehicle weight W/O driver
858 kg

engine /setup/ modifications
k24a3 motor , k20a type R gearbox , JDMyard IM , 80mm TB , JDMyard header , Buddyclub n+ cams package , Hondata KPRO , Open header with megaphone , 200mm velocity stack.

driven tyres type
24.5x8x13 Mickey Thompson ( 7.5 to 8 psi )


60ft 1.646

ET 11.739

MPH 113.17

Video : http://www.youtube.com/watch?v=B8HiKXdcEPQ


http://i278.photobucket.com/albums/kk99/egk24/DSC00035.jpg

[2002 TeGgY]

car
03' DC5R
vehicle weight W/O driver
1140kg
engine/setup/modifications
fully built k20/24
driven tyres type
M&H Slicks @13psi

-------------------------

R/T .580
60ft 1.766
E/T 12.489
MPH/KMh 108.63mph / 174.83kmh


http://i277.photobucket.com/albums/kk46/fbarso01/DSC_0542.jpg

[B16]

Car: 1989 Honda CRX siR
Vehicle weight W/O driver: 980Kg
Engine/setup/modifications: Stock B16, custom turbo setup, 8psi
Driven tyre type: Falken RT-615's
-------------------------
R/T : .981
60ft : 2.269
E/T : 13.798
MPH/KMh : 105.14 / 169.20

[delsol9000rpms]

Car: Honda eg5 Vti
Vehicle weight : 950kg w/o driver, 1040kg with driver (Big Boy)
Engine/setup/modifications: b18c7 I/H/E+Tune
Driven tyre type: Mickey Thompson street radials (Street Tyres)

It is this car:

http://www.ozhonda.com/forum/showpost.php?p=2268488&postcount=362

-------------------------
13.4@101.5 mph

It was the drivers first time ever to the drags so he did pretty well however theres still at least a 13.2 with a bit more practise launching to get those sixty feets into the 1.** zone


Heres the time slip

http://img25.imageshack.us/img25/3916/scan0013dq.jpg (http://img25.imageshack.us/i/scan0013dq.jpg/)

[89lude]

car EK4
vehicle weight W/O driver
stock - minus rear seats + passenger seat
engine/setup/modifications
stock/intake/coilovers
driven tyres type
some el cheapo firestone tyres 195/55/R15 on 22psi
-------------------------
this was my first time at WSID

R/T: 1.165
60ft: 2.301
E/T: 14.790
MPH/KMh: 91.17 mph

http://img237.imageshack.us/img237/3393/0412040007iy0.jpg

Not sure if this is seen as chit chat...but it is related so yeah - Do 'stock' ek4's with intake run high 14's? Just wondering, so i know what time i should be aiming for...I was going to aim to break into 15's! So yeah i guess i will aim to break into 14's then! Or did i miss something?

[EK1.6LCIV]

I had a lil crack at the Willowbank track out the back of Ipswich before I went on holidays, was a blast, got wasted by alot of cars pulling everything from a 7.4-13s, everyone on that night was running low 13s apart from us lol

I'm hoping for a better run come my new suspension bushings, playing with suspension dampening and tyre pressure :) If anyone wants to come down with us in the near future hit us up :) I'm also hoping to take the car to Sydney's track as well next time I visit some friends

http://i224.photobucket.com/albums/dd127/kwelrap/scan0002.jpg

[cdpfxz]

Not sure if this is seen as chit chat...but it is related so yeah - Do 'stock' ek4's with intake run high 14's? Just wondering, so i know what time i should be aiming for...I was going to aim to break into 15's! So yeah i guess i will aim to break into 14's then! Or did i miss something?

I guess there's a slip there to prove it, but I find that hard to believe... Anyone else with stock ek4's pulling similar times?

[SHW.70Y]

I guess there's a slip there to prove it, but I find that hard to believe... Anyone else with stock ek4's pulling similar times?

my mates stock one went 15.3 with a 2.4 sixty foot and mc rooted rear mount.

[YBOOST]

Car: DC2R

Vehicle weight W/O driver: 1018kg

Engine/setup/modifications: JDM K20a, KPRO, JDMyard IM, 75mm TB, DTR 4-2-1 header, 3" custom exhaust
Driven tyre type: M&H 23x8.5x15
-------------------------
R/T: .201
60ft: 1.795
E/T: 12.32
MPH : 108.21

12325

[JDM.Power]

I guess there's a slip there to prove it, but I find that hard to believe... Anyone else with stock ek4's pulling similar times?

if you know how to drive properly easy to run high 14s with them similar mods.

[cdpfxz]

if you know how to drive properly easy to run high 14s with them similar mods.

cool, well that's a good thing for me seeing as though I own an ek4! I expected them to run a little slower that's all..

Nic

[denrie]

Car: EG5 vti
Vehicle weight W/O driver: 1086
Engine/setup/modifications:Stock B18c2 all motor,RMF replica headers, custom cat back, stock box, 4.7 lsd type r box
Driven tyre type:nankang street tyres 30% thread left
-------------------------
R/T: .730
60ft: 2.208
E/T: 14.245
MPH/KMh: 157.08

[RandyRhydah]

Car: eg4
Vehicle weight W/O driver: stock minus back seats and spare tyre
Engine/setup/modifications: stock b18c sir-g with ebay cold air intake sotck headers 2.5 inch cat back
Driven tyre type: bob jane all rounder 185 60(i think) 14
-------------------------
R/T .524
60ft 2.3
E/T 14.752
MPH/KMh 95.01

http://c1.ac-images.myspacecdn.com/images02/151/l_c93d45e8de6f41b3af0f38473a998664.jpg

[Behtec_JunKIE]

Car: crx gen 2
Vehicle weight W/O driver: stripped 885kgs
Engine/setup/modifications: stock b18c7 blox intake, toda headers, 2.5 inch exhaust power fc tunned
Driven tyre type: M&H 23.8 5/15
-------------------------
R/T .467
60ft 1.763
E/T 12.688
MPH/KMh 104

http://i217.photobucket.com/albums/cc235/12rpm/slip.jpg

[delsol9000rpms]

What a rocket!!!^^ well done man very quick for an un-opened motor!!

[Behtec_JunKIE]

What a rocket!!!^^ well done man very quick for an un-opened motor!!

thanks man im hoping to do better sum day soon

[anjin]

Car: Gen1 crx
Vehicle weight W/O driver: 853 kg
Engine/setup/modifications:B18C, toda spec B, blox im, generic extractors, type R ecu and vafc, Y1 box with lsd, track suspension
Driven tyre type:toyo 881, very worn, 205.50 R15
-------------------------
R/T 0.160
60ft 2.366
E/T 14.460
MPH/KMh 157.60

http://www.redpepperracing.com/gallery/d/257548-1/14+460+run.jpg

[Lukezen27]

Car: Gen1 crx
Vehicle weight W/O driver: 853 kg
Engine/setup/modifications:B18C, toda spec B, blox im, generic extractors, type R ecu and vafc, Y1 box with lsd, track suspension
Driven tyre type:toyo 881, very worn, 205.50 R15
-------------------------
R/T 0.160
60ft 2.366
E/T 14.460
MPH/KMh 157.60



First time yeah? fun hey :)

You net better times the more you go and learn to drive

With that setup sub 14’s won’t be a problem IMO

[I VTEC U]

Car: 93 Civic EG5
Vehicle weight W/O driver: 950kg (1045kg with driver)
Engine/setup/modifications: Stock 98 Spec B18CR, 98 Spec headers, 96 Spec box (4.4)
Driven tyre type: Dunlop Direzza's 205/50/R15
-------------------------
R/T: .275
60ft: 2.37
E/T: 14.27
MPH/KMh: 158.35

http://i437.photobucket.com/albums/qq93/IVTECU/EG5/Image171.jpg

[RandyRhydah]

Car: 1994 eg4
Vehicle weight W/O driver: stock minus back seats / spare tyre
Engine/setup/modifications: Stock b18c sir-g cold air intake stock headers 2.5 inch exhaust
Driven tyre type: bob jane all rounder 185 50 14 at 30 psi
-------------------------
R/T: .524
60ft: 2.300
E/T: 14.752
MPH/KMh: 95.01 / 152.9

http://c1.ac-images.myspacecdn.com/images02/151/l_c93d45e8de6f41b3af0f38473a998664.jpg

[dc2r-0636]

Car: Honda Integra Type R DC2
Vehicle weight W/O driver: 1080
Engine/setup/modifications: Stock/bmc intake/stock
Driven tyre type: TOYO PROXES R1R @23psi
-------------------------
R/T- 1.3
60ft - 2.14
E/T - 14.68
MPH/KMh - 90mph
http://www.flickr.com/photos/51132352@N06/?saved=1
*first time at the drags*

http://www.flickr.com/photos/51132352@N06/?saved=1

[Spoon SiRG]

Car: 99' DC2 VTiR
Vehicle weight W/O driver: 1092 kg
Engine/setup/modifications: stock B18C2, stock S80 VTiR Gearbox, Mugen Intake, ITR 62mm TB, Skunk2 IM, B16B Cams, DC Sports JDM 4-1 Header, stock JDM ITR Catback, Apexi Power FC tuned by Adrian (TODA AU) ;)
Driven tyre type: Bridgestone Potenza GIII 205/20/15 @ 23 psi
-------------------------
R/T- .579
60FT- 2.2
E/T- 14.3
MPH/KMH- 96/155

http://i248.photobucket.com/albums/gg167/Spoon_SiRG/DC2002-1.jpg

[cyryl07]

nice one! hope to do better next time man!

[Spoon SiRG]

Thanks dude, will run again to try & do better 60-ft time, will edit post if achieved.

[cyryl07]

Car: 88 civic ed6
Vehicle weight W/O driver: didnt get the chance to weigh the car
Engine/setup/modifications: d16y1, skunk2 IM, 2 1/4 4-2-1 headers, stock replacement clutch, stock intake and P28 computer
Driven tyre type: komet 195/60/14 @ 25 psi
-------------------------
R/T- 1.915
60FT- 2.3
E/T- 14.728
MPH/KMH- 95/153


http://i228.photobucket.com/albums/ee309/cycris/DSC06779.jpg

[Spoon SiRG]

Go SOHC VTEC!!!

That's fantastic man! Was that with the Skunk2 Chip?

[cyryl07]

thanks man. yeh thats with the Skunk2.

[hitoriko]

thanks man. yeh thats with the Skunk2.

stock internals? how many kms?

[cyryl07]

yeh stock internals. the motor itself, probably done over 100 000 to 150 000 kms

[zco]

Thread bump lol

Car: EK Hatch
Vehicle weight W/O driver: 990kgs
Engine/setup/modifications: K20A , DTR Header, 3" Exhaust, Stock PRC Manifold, stock K20A TB, AEM Hybrid Intake, KPRO
Driven tyre type: Yokohama Advan AD08 205/50R15
-------------------------
R/T 1.636
60ft 2.063
E/T 12.949
MPH 107.71mph

http://www.cacklingpipesphotography.com/110831_sd_streetmeet/sdstreetmeet310811_038.JPG

http://img710.imageshack.us/img710/7009/67061614.jpg

[Spoon SiRG]

Car: 97' EG2 CRX del Sol
Vehicle weight W/O driver: 1100kg
Engine/setup/modifications: Stock B16A2, OEM DC2 Airbox, OEM JDM ITR 4-1 Header & B-Pipe, OEM 2 Inch Muffler, Tuned Apexi VAFC2
Driven tyre type: Dunlop Direzza DZ101 205/50/15 @ 24psi
-------------------------
R/T .958
60ft 2.2
E/T 14.8
MPH/KMH 92/148


http://i248.photobucket.com/albums/gg167/Spoon_SiRG/DSCF0624.jpg

[Benson]

Car: BYP Honda Civic Drag Car
Vehicle weight W/O driver: 750kg
Engine/setup/modifications: BYP K20/K24/RRC/70mm/ ASP headers/ 70mm Titanium Muffler/ Martini Racing E85/ Hondata Kpro/ ~185kw at the wheels
Driven tyre type: MH 24.5x9x13
http://i4.photobucket.com/albums/y138/fatboyz39/IMGP1987.jpg

[JDM DC2R]

Car: Dc2R
Vehicle weight W/O driver: 1065kg
Engine/setup/modifications: Stock b18c7, I,H,E, high flowcat converter,hasport mounts,Tuned Apexi Neo
Driven tyre type: Ku36 front at 25PSI rear at 36 psi

14.166 at 102.09 MPH

[dc2r-0636]

Good time, u have time sheet ? Wana see 60ft

[JDM DC2R]

Good time, u have time sheet ? Wana see 60ft

Yep crap 60ft time

http://www.youtube.com/watch?v=6ALLa0Top9o&feature=player_embedded

[JDM DC2R]

Car: Dc2R
Vehicle weight W/O driver: 1065kg
Engine/setup/modifications: Stock b18c7, I,H,E, high flowcat converter,hasport mounts,Tuned Apexi Neo
Driven tyre type: Ku36 front at 25PSI rear at 36 psi

13.875 @ 100.26 MPH


http://www.youtube.com/watch?v=pzwCImHHIig&feature=youtu.be

[dougie_504]

Very nice time!

[JDM DC2R]

Thanks. Funny thing is that was my best time. But i ran it twice

http://www.youtube.com/watch?v=MXHQ6MQs_AI&feature=plcp

[GSi_PSi]

nice time man, was out there watching

[JDM DC2R]

Really. Should have come over for a chat. Was quite a warm night. My MPH was lower then last time, but a faster time.

[na-118]

Car: EG Hatch
Vehicle weight W/O driver: 980 KG
Engine/setup/modifications: B16a turbo.
Driven tyre type: 75$ HI FLY tyres

-------------------------

60ft 2.1
E/T 12.7
MPH 112.71mph

[mocchi]

Car: EG Hatch
Vehicle weight W/O driver: 980 KG
Engine/setup/modifications: B16a turbo.
Driven tyre type: 75$ HI FLY tyres

-------------------------

60ft 2.1
E/T 12.7
MPH 112.71mph

fuark. beast!

[connorling]

Car: EG Civic hatch
Vehicle weight W/O driver: no ideas
Engine/setup/modifications: B18c vtir turbo 8.5 psi (216 fwhp) no LSD
Driven tyre type: street tyres (595)
-------------------------
R/T: 0.462
60ft: 2.23
E/T: 13.259
MPH/KMh: 107.52 mph

http://i1168.photobucket.com/albums/r500/hks071/bestET.png

[na-118]

Car: EG Hatch
Vehicle weight W/O driver: 980 KG
Engine/setup/modifications: B16a turbo.
Driven tyre type: slicks

-------------------------

60ft 2.2
E/T 12.6
MPH 113.12mph


that's the new update, the reason why i didn't really improve much was because i didn't have a laptop to change launch control,
launch control with slicks was set at 5200 which wasn't enough, i kept bogging on take off even riding the clutch heavily.

so next time i'll be out will be trial and error with launch control settings,

definately hit the low 12s with correct driving techniques


fuark. beast!

[na-118]

Car: EG Hatch
Vehicle weight W/O driver: 950 KG
Engine/setup/modifications: B16a turbo.
Driven tyre type: slicks

-------------------------

60ft 1.8
E/T 12.2
MPH 109.82mph

[EKVTIR-T]

congrats bru

you got that low 12

do you feel everything was optimal on that run? or still room to improve

[u mad?]

Car: EG Hatch
Vehicle weight W/O driver: 950 KG
Engine/setup/modifications: B16a turbo.
Driven tyre type: slicks

-------------------------

60ft 1.8
E/T 12.2
MPH 109.82mph
Nice one guvna

What size slucks?

[na-118]

Car: EG Hatch
Vehicle weight W/O driver: 950 KG
Engine/setup/modifications: B16a turbo.
Driven tyre type: slicks

-------------------------

60ft 1.8
E/T 12.2
MPH 109.82mph


congrats bru

you got that low 12

do you feel everything was optimal on that run? or still room to improve

yeah i just need heaps of practise, i tend to mix and match my take offs a lot and a lot of trial and error throughout the runs.


Nice one guvna

What size slucks?


i'm not 100% sure though i do think it's 205 50 15 full slicks


this time i went out and removed passenger seat, stiffen rear suspension, raised the rear end about 3 inches, 10psi tyre pressure up front and 36psi on rear wheels.

next i'd like to try removing the rear sway bar, rear subframe brace, rear reo bar, and front reo bar, with a custom rear bumper

[Denis]

Car: honda civic eh9 vti sedan
Vehicle weight W/O driver: 1050ish
Engine/setup/modifications: stock d16y1 xforce 4-2-1 extractors high flow cat 2 1/4 inch custom exhaust no name brand twin loop simota intake with k&n pod
Driven tyre type: achiles cheapos
-------------------------
R/T .688
60ft 2.3
E/T 15.617
MPH/KMh 87mph/141km/h

[na-118]

is this the black one with work equips ( i think ) on it?

[B18-DC2]

Car: Honda Integra Vti-r dc2
Vehicle weight W/O driver: 1100kg
Engine/setup/modifications: Cai, 4-2-1 header, full 2.5" exhaust + highflow cat
Driven tyre type: cheap low profile tyres
-------------------------
R/T - .488
60ft - 2.463
E/T - 15.623
MPH/KMh - 150.64km

[LSPMotorsports]

LSP Motorsports EK daily driven street car!

Car: Honda Civic 97 EK4
Vehicle weight W/O driver: 1100Kgs
Engine/setup/modifications: Internally Stock B16A2 Turbo'd,
Driven tyre type: M/T 22"x8" R15

R/T: .804
60ft: 1.926
E/T: 11.620
MPH: 122.02

http://i1294.photobucket.com/albums/b615/LSPMotorsports/IMG_0731_zpscfaf7c41.jpg (http://s1294.photobucket.com/user/LSPMotorsports/media/IMG_0731_zpscfaf7c41.jpg.html)

[EKVTIR-T]

^ wow congrats

[LSPMotorsports]

Thanks! We were pretty happy with the result 1st time on slicks

[jayeg]

Thanks! We were pretty happy with the result 1st time on slicks

how much power is this making

[LSPMotorsports]

235kws at V&E's dyno

[RenzokukenJ]

Car: BB5 Prelude
Vehicle weight W/O driver: Not sure, full stock interior with heavy sound system and tools ect
Engine/setup/modifications: Stock F22Z6 with SRI
Driven tyre type: $60 ling long tyres
-------------------------

60ft 2.4sec
E/T 16.673
MPH 80.14MPH

Was 36c on track, dat heat soak was strong

[carayan]

Car: BB5 Prelude
Vehicle weight W/O driver: Not sure, full stock interior with heavy sound system and tools ect
Engine/setup/modifications: Stock F22Z6 with SRI
Driven tyre type: $60 ling long tyres
-------------------------

60ft 2.4sec
E/T 16.673
MPH 80.14MPH

Was 36c on track, dat heat soak was strong

loooooooooooool

[RenzokukenJ]

loooooooooooool

ay ay ay

didnt do burnout at the right spot, decided to do it right at the lights lmao

tyres were so shit they slipped the whole way

[dc2r-0636]

With a 80mph accros the line I doubt u did much spinning

[EKVTIR-T]

hahaha

[nate92]

Car: Honda integra VTi-R 98
Vehicle weight W/O driver: rear seats rear plastics spare tyre etc removed
Engine/setup/modifications: b18c2 stock intake pipe with oem dc2 filter with comptech icebox. OEM 4-1 jdm headers j's racing decat, rm01a catback
Driven tyre type: street tyres
-------------------------

r/t - 0.40
60ft - 2.206
mph 94.26
1/4 14.623


i reckon if i did a better 60ft i could get a slightly lower time like 14.4 or 14.5

[mocchi]

Car: Honda integra VTi-R 98
Vehicle weight W/O driver: rear seats rear plastics spare tyre etc removed
Engine/setup/modifications: b18c2 stock intake pipe with oem dc2 filter with comptech icebox. OEM 4-1 jdm headers j's racing decat, rm01a catback
Driven tyre type: street tyres
-------------------------

r/t - 0.40
60ft - 2.206
mph 94.26
1/4 14.623


i reckon if i did a better 60ft i could get a slightly lower time like 14.4 or 14.5

nice bor

[RenzokukenJ]

With a 80mph accros the line I doubt u did much spinning

I guess you have never experienced ling long tyres m8

[carayan]

I guess you have never experienced ling long tyres m8

http://mb.cision.com/Public/MigratedWpy/102383/9218968/8f3b7e57a3137587_org.jpg

[Lukezen27]

I guess you have never experienced ling long tyres m8

I run a 14 flat in my EP3 with ling longs heheh

[joe.teg]

Car: DC2 VTI-R
Vehicle weight W/O driver: 1075
Engine/setup/modifications: HI COMP B18C2, TODA C2 CAMS, S300 ECU, INJEN CAI, SKUNK IM + 68MM TB, T1R HEADERS, BUDDYCLUB SPEC 2 AND HI FLOW CAT
Driven tyre type: KHUMHO KU31 @ 32PSI
-------------------------

60ft 2.116
E/T 13.738
MPH 103.38

[Benson]

Car: BYP Racing Drag Civic
Vehicle weight W/O driver: 770kg
Engine/setup/modifications: BYP Racing K20/K24 ~320hp at the wheels All Motor
Driven tyre type: MH 24.5x9x13
-------------------------
R/T 0.137
60ft 1.543
E/T 10.375
MPH/KMh 130.9mph/210kph


http://i4.photobucket.com/albums/y138/fatboyz39/DSC_0465_zpsfc09947f.jpg (http://s4.photobucket.com/user/fatboyz39/media/DSC_0465_zpsfc09947f.jpg.html)


http://www.youtube.com/watch?v=eKUYc1KBw6o

[The.Godfather]

Car: Eg civic hatch
Vehicle weight W/O driver: 920kg
Engine/setup/modifications: H22A (jap spec) RMF headers, short ram intake, stand alone ecu(with crap tune lol)
Driven tyre type: mt et streets but only 205's :(

ET 13.6
MPH 101
60 ft 2.0

Wheel spin all of 1st and most of 2nd...

Civic Will be de-rego'd in a week and will get more serious.

[The.Godfather]

Forgot to add has skunk drag Coilovers all round, moroso front traction bar, carbon bonnet, carbon hatch, completely gutted interior and I'm sure a few other things...

[u mad?]

should be able to get 1.80/1.90 60's with those tires on that setup, low 13's capable

[The.Godfather]

should be able to get 1.80/1.90 60's with those tires on that setup, low 13's capable

I gave her all she had champ... :(

I think the tune is letting me down and the 205's are too small, I wanted the 225's but was a 13 week wait at the time.

[u mad?]

I gave her all she had champ... :(

I think the tune is letting me down and the 205's are too small, I wanted the 225's but was a 13 week wait at the time.

what launch technique and what psi did u run them at?

[The.Godfather]

what launch technique and what psi did u run them at?

I've been drag racing for 13 yrs so technique is sorted ;)

Did multiple street meets and tried all different psi settings and rpm launches and shift points and exhausts etc etc etc - 13.6 was the best.

Just going all out H2B now lol

[u mad?]

nice man keep us posted

[IEVAQ8]

Car: DC2R
Vehicle weight W/O driver: 1280kgs
Engine/setup/modifications: Stock engine with Full race manifold and gt3037s turbo @ 7.5psi
Driven tyre type: 205/50/15 toyo r888
-------------------------
R/T 1.94
60ft 2.11
E/T 12.88
MPH/KMh 113.39 (tyre size was way too small, caused me to cross the line on the limiter in 4th for about 50m before finish)

[Killa From Manila]

Car: DC2R K20Z1
Vehicle weight W/O driver: no rear interior, spare tyre, jack etc.
Engine/setup/modifications: K20Z1, Karcepts intake, 70mm TB, RBC mani, ASP header, 3" exhaust, tune. 150kw atw
Driven tyre type: Kumho KU36 215/45/16 @ 40psi hot
-------------------------
R/T: .699
60ft: 2.183
E/T: 13.375
MPH/KMh: 107.49


http://www.youtube.com/watch?v=4Ivu7kd0PeI&feature=youtu.be

[Lonewolf]

nice, should be a 12 in that with a good launch....

Out of interest, where did you get that gauge pod?

[Killa From Manila]

cheers mate, definitely have the MPH to backup a 12. got that gauge pod 2nd hand from a seller on here, i have no idea where to get them new sorry.

[Aaron.k]

Car: DC2R
Vehicle weight W/O driver: 1020 (stripped)
Engine/setup/modifications: k20/k24,DC 2.2 cams, rrc mani/70mtb,aspheader into 3' jdmyard custom catback exhaust -tuned on e85 by Adrian @ SASautomotive (by far best honda tuner in aus)
Driven tyre type:24.5/8/15 mt full slicks

I believe i have the fastest k series ALL MOTOR dc2r in australia?

http://i907.photobucket.com/albums/ac271/Aaron_kovacevic/1471901_693145224052113_811204354_n_zps44db13ea.jp g (http://s907.photobucket.com/user/Aaron_kovacevic/media/1471901_693145224052113_811204354_n_zps44db13ea.jp g.html)

[newpaddy3]

Car: DC2R
Vehicle weight W/O driver: 1020 (stripped)
Engine/setup/modifications: k20/k24,DC 2.2 cams, rrc mani/70mtb,aspheader into 3' jdmyard custom catback exhaust -tuned on e85 by Adrian @ SASautomotive (by far best honda tuner in aus)
Driven tyre type:24.5/8/15 mt full slicks

I believe i have the fastest k series ALL MOTOR dc2r in australia?

http://i907.photobucket.com/albums/ac271/Aaron_kovacevic/1471901_693145224052113_811204354_n_zps44db13ea.jp g (http://s907.photobucket.com/user/Aaron_kovacevic/media/1471901_693145224052113_811204354_n_zps44db13ea.jp g.html)

Do you have a time slip?

[Aaron.k]

http://i907.photobucket.com/albums/ac271/Aaron_kovacevic/969288_337883446351445_1220103549_n_zps8e28406a.jp g (http://s907.photobucket.com/user/Aaron_kovacevic/media/969288_337883446351445_1220103549_n_zps8e28406a.jp g.html)

[Aaron.k]

theres videos and other time slips all over Facebook if anyone thinks I'm lying lol..

[lsvtec]

seen this at the drags the other week, what a beast :)

[grifty]

JRSC SOHC ZC (smokey), 6.5 PSI running stock ecu.

5k rpm launch

http://i41.tinypic.com/ztggfk.jpg

[destrukshn]

Car: DC2
Vehicle weight W/O driver: 1380kg
Engine/setup/modifications: b18c2 + boost
Driven tyre type: 215/45/r16 kuhmo ku36
-------------------------
R/T .712
60ft 2.148
E/T 12.653
MPH/KMh 118.40 mph

[IEVAQ8]

Car: DC2
Vehicle weight W/O driver: 1380kg
Engine/setup/modifications: b18c2 + boost
Driven tyre type: 215/45/r16 kuhmo ku36
-------------------------
R/T .712
60ft 2.148
E/T 12.653
MPH/KMh 118.40 mph

How much power???

[destrukshn]

How much power???

320kw ish lol

[Lukezen27]

320kw ish lol

destrukshn man WTF

I'm EG5 B16 turbo at 180kw run 12.2

[destrukshn]

look at the weight.
lol
1380kg + driver, so about 1450kg.
traction is the problem here.
lol
mph is there to go well into the 11's.

[IEVAQ8]

320kw ish lol


look at the weight.
lol
1380kg + driver, so about 1450kg.
traction is the problem here.
lol
mph is there to go well into the 11's.

very nice power figures...
built engine?? specs?? pm if u don't mint...

the mph is slightly low for that sort of power (in my opinion), but very impressive...

[destrukshn]

built motor.
9:1 comp
forged motor
itr cams
adjustable cam gears
supertech valve train
custom manifold
gtx3071r 0.82 tial vband rear housing
on pump fuel
that's the main part of it i guess, without giving out too much
well like i said, you gotta remember, that it's a heavy car, vtir,
sunroof, dynamat throughout the whol car, i mean the whole car. lol.
with sub, spare, full interior, full tank of fuel, tool kit, still retaining a/c too.
it's a heffa of a dc2 lol.

[IEVAQ8]

built motor.
9:1 comp
forged motor
itr cams
adjustable cam gears
supertech valve train
custom manifold
gtx3071r 0.82 tial vband rear housing
on pump fuel
that's the main part of it i guess, without giving out too much
well like i said, you gotta remember, that it's a heavy car, vtir,
sunroof, dynamat throughout the whol car, i mean the whole car. lol.
with sub, spare, full interior, full tank of fuel, tool kit, still retaining a/c too.
it's a heffa of a dc2 lol.

nice work...
psi???

[destrukshn]

20psi.

[Stevil]

14.574, 98mph at WSID last month
148kw atw 1350kg ( heavy duty towbar & a full tank of juice didnt help )
Sohc R18a T25 E85
Advan AD08 R

4k rpm launch

[curtis265]

Not bad Stevil - How much boost is that runnning?

[Stevil]

curtis265 Im still running 7 psi, got a few tracksdays coming up in the next 2 months then Im gunna up the boost to 10 or 12psi., will definetly be hitting the 1/4 mile again, Keen to see 13s on street tyres. Not sure whether its the tyres / stiffish coilovers or whether Im crap at launching. I had 5 runs and wheel spin in 1st was ridiculous, couldnt get it to stop even I dropped revs on the launch ??

[destrukshn]

high reponse turbos will do that to you.
a baby t25 will spool in no time.

[Stevil]

Yeah tell me about it destrukshn, boost comes on from about 1700rpm, by 2000rpm its putting around 200nm to the ground, at 3000rpm its pretty much putting done 140kw's and 260nm. Gunna adjust launch control to around 2500rpm next time or Ill just try and launch with almost no revs.

[connorling]

that power number should be low 14sec.

not sure what happen there.

[u mad?]

nah sounds about right, 98mph with 1350 kg car with 150 atw.

[Killa From Manila]

launch higher rpm, ride the clutch more

[lil_foy]

Car: EG Civic
Vehicle weight W/O driver: 1000kg~
Engine/setup/modifications: 11:1 1.8L B16b + toda b cams + i/h/e/s300
Driven tyre type: 205/50/15 federal RSR with circuit alignment (-4 camber)
-------------------------
60ft 2.09
E/T 13.6
MPH 103.74

Will be heading out in winter with less fuel for a lower time, this was done with full tank in mid summer.

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/1454573_10153492987920580_1297111142_n.jpg

[dCn]

Any H2B civic setup times? anyone??

[Jerry92]

Car: EK1
Vehicle weight W/O driver: 977Kg, half tank fuel
Engine/setup/modifications: Stocko K20a, Hondata
Driven tyre type: 80% worn Potenza RE002 @ 36 psi (didn't change pressures)
-------------------------
R/T = .704
60ft = 2.119
E/T = 13.318
MPH/KMh = 107.10

[Lonewolf]

Car: EG
Vehicle weight W/O driver: 1020kg minus driver
Engine/setup/modifications: B18CR with exhaust, header and pod filter
Driven tyre type: Yoko ad08r 205/15
-------------------------
60ft = 2.3-2.4
E/T = 14.8
MPH = 94mph

Fair bit slower than I expected (even with the shitty 60 times).
I guess the car is a bit down on power from where i expected, maybe due to restrictive exhaust and/or factory tune

[cbauto]

What's minus driver, is thatcwith our without driver?

[Lukezen27]

Car: EG
Vehicle weight W/O driver: 1020kg minus driver
Engine/setup/modifications: B18CR with exhaust, header and pod filter
Driven tyre type: Yoko ad08r 205/15
-------------------------
60ft = 2.3-2.4
E/T = 14.8
MPH = 94mph

Fair bit slower than I expected (even with the shitty 60 times).
I guess the car is a bit down on power from where i expected, maybe due to restrictive exhaust and/or factory tune

maybe an air flow issue?

Benny with the same setup used to run 13.8s no problems

[Lonewolf]

What's minus driver, is thatcwith our without driver?

without driver


maybe an air flow issue?

Benny with the same setup used to run 13.8s no problems

theres maybe 0.5sec to be gained with a better launch, but MPH is a bit down based on others with similar mods (though most seem to have a tune - could account for the difference)

[Lukezen27]

without driver



theres maybe 0.5sec to be gained with a better launch, but MPH is a bit down based on others with similar mods (though most seem to have a tune - could account for the difference)

No tune for Benny stock B16C7 ECu :)

[lil_foy]

Car: EG
Vehicle weight W/O driver: 1020kg minus driver
Engine/setup/modifications: B18CR with exhaust, header and pod filter
Driven tyre type: Yoko ad08r 205/15
-------------------------
60ft = 2.3-2.4
E/T = 14.8
MPH = 94mph

Fair bit slower than I expected (even with the shitty 60 times).
I guess the car is a bit down on power from where i expected, maybe due to restrictive exhaust and/or factory tune

Mph is defs down a fair bit, you'd usually expect around 98~mph for standard with bolt ons. What gearbox are you using?

[Lonewolf]

s80, 4.7 FD i believe
passed the line @ around 7000rpm in 4th i think

unsure of the condition/type of cat, and the twinloop may be restrictive vs straight through muffler

[munster42]

with the 4.7 I would assume it would be faster than that.

Maybe its just the driver

[Lonewolf]

with the 4.7 I would assume it would be faster than that.

Maybe its just the driver

Driver accounts for the shit 60' and about 0.5s of the ET, but not the MPH :)

[munster42]

Driver accounts for the shit 60' and about 0.5s of the ET, but not the MPH :)

Haha that is true.

Get that double loop off there and let it breathe man. It was far too quiet when I saw it at No Limits.

[IEVAQ8]

Car: EK cxi
Vehicle weight W/O driver: 1120kgs without driver
Engine/setup/modifications: b18 dart block with gt35r & DC2R box
Driven tyre type: 195/45/16 Minerva's
-------------------------
R/T: 0.776
60ft: 2.317
E/T: 12.893
MPH: 117.81

http://youtu.be/2hQUnnkilqM

CAR NO. 137
http://i287.photobucket.com/albums/ll147/ievaq8/ek%20civic%20build/20140623_202955_zpsaie4et9u.jpg

[bennjamin]

s80, 4.7 FD i believe
passed the line @ around 7000rpm in 4th i think

unsure of the condition/type of cat, and the twinloop may be restrictive vs straight through muffler

get your launches better. Drop the PSI of the front tyres more (and equally). Im not a pro driver in any way , but i got my EG vti with b18c7 (standard ecu , standard header and equivilent intake and exhaust ) around 1080kg without driver to 13.6 @103mph. Ran constant 2.1s on the 60ft.
Just keep going , and keep practicing and you will find a nice sweet spot.

[Lonewolf]

its quite the disparity in MPH though which doesnt account for the crappy launch, just the ET.
Anyway, have changed the exhaust, and engine mounts and probably get a tune before i hit the strip again in the warmer weather

[MIKO_OL]

its quite the disparity in MPH though which doesnt account for the crappy launch, just the ET.
Anyway, have changed the exhaust, and engine mounts and probably get a tune before i hit the strip again in the warmer weather

Funnily enough were very similar aswell and i've just changed those feel things minus the tune. My run definitely is abit similar so i don't think it's the car bro just need better on the 60" launch.


Car: EG
Body: Full Interior
Engine/setup/modifications: B18CR with I/H/E
Driven tyre type: Bridgestone PlaYz 205/45/16
-------------------------
60ft = 2.38
E/T = 14.4
MPH = 99.62mph

defos not happy but i guess this is okay for my first time. Since have changed engine mounts, wheels & tyres.

[Lukezen27]

Funnily enough were very similar aswell and i've just changed those feel things minus the tune. My run definitely is abit similar so i don't think it's the car bro just need better on the 60" launch.


Car: EG
Body: Full Interior
Engine/setup/modifications: B18CR with I/H/E
Driven tyre type: Bridgestone PlaYz 205/45/16
-------------------------
60ft = 2.38
E/T = 14.4
MPH = 99.62mph

defos not happy but i guess this is okay for my first time. Since have changed engine mounts, wheels & tyres.

Good stuff for a first man :) Nerves kill ya first outing for sure lol

bennjamin used to hit 13.8 most times out but we used to go a lot and practice is key and helps with nerves
R/T .527
60ft 2.180
E/T 13.851
MPH/KMh 102.08mph / 164.29kmh

Crazy fun yeah?

Can't to get out again

[IEVAQ8]

ok guys,
I ended up changing out my dc2r box for a freshly rebuilt vtir integra box (4.4fd) with oem itr LSD and gsi 5th gear
I was able to run a 12.95 @ 124mph on 195/45/16 track max tyres...lol and again 2.1 60ft
I also tried my semis again 225/50/15 advan ad040 which are beyond the wear indicators...
and run 12.7 @120mph as I bogged second really bad and again 2.2 60ft

next time out (hopefully soon), will be on full MT slicks (24.5x8x15) and boost per gear tune...

[Lonewolf]

Funnily enough were very similar aswell and i've just changed those feel things minus the tune. My run definitely is abit similar so i don't think it's the car bro just need better on the 60" launch.


Car: EG
Body: Full Interior
Engine/setup/modifications: B18CR with I/H/E
Driven tyre type: Bridgestone PlaYz 205/45/16
-------------------------
60ft = 2.38
E/T = 14.4
MPH = 99.62mph

defos not happy but i guess this is okay for my first time. Since have changed engine mounts, wheels & tyres.

5mph is a pretty big difference considering the same mods...
could have been my engine mounts too, and the restrictive exhaust but will see in the next few months when i make it to the strip.

Yours is good for a mid-high 13 with that mph, just need to get the 60' down

[MIKO_OL]

5mph is a pretty big difference considering the same mods...
could have been my engine mounts too, and the restrictive exhaust but will see in the next few months when i make it to the strip.

Yours is good for a mid-high 13 with that mph, just need to get the 60' down

Yeah doing better than you. *YES* ahha. Went again tonight ay. STill... not a great improvement.

Car: EG
Body: Full Interior
Engine/setup/modifications: B18CR with I/H/E
Driven tyre type: Yokohama S-drives 205/50/16
Weigh in : 1190 W/Driver. W/O = 1120kg +-
-------------------------
60ft = 2.23
E/T = 14.3
MPH = 97.2mph

Did abit better than my original run. So many factors to consider too. Wasn't running right damper/psi, shift extender and had 3/4 of a tank. Rookie mistake. :thumbdwn: Defos getting better at my 60" on average though. Feels good with less bog.

[IEVAQ8]

Hey guys,
Headed out again 2weeks ago....this time on only 8psi boost and full slicks MT 24.5X8X15
managed to run 12.84@ 110mph with a pretty happy 1.94 > 60ft
Nearly stalled it off the line with the slicks from the amou t of massive grip...
I recently went bak to the dyno to retune boost per gear....
And just for giggles...
On 8psi the civic makes 240kw

Next outing will b 314kw 15psi and my slicks

[dc2r-0636]

Hey guys,
Headed out again 2weeks ago....this time on only 8psi boost and full slicks MT 24.5X8X15
managed to run 12.84@ 110mph with a pretty happy 1.94 > 60ft
Nearly stalled it off the line with the slicks from the amou t of massive grip...
I recently went bak to the dyno to retune boost per gear....
And just for giggles...
On 8psi the civic makes 240kw

Next outing will b 314kw 15psi and my slicks

Yeh saw you out at Calder couple Fridays ago. My mate was racing his white 35 Gtr. Was wondering why your mph was down from last time. 8psi explains that!

[IEVAQ8]

Yeh saw you out at Calder couple Fridays ago. My mate was racing his white 35 Gtr. Was wondering why your mph was down from last time. 8psi explains that!

ahh nice, u should of came and said hi...
I don't bite, knowing there are enthusiasts in the crowed is always awesome, compared to the laughs and comments I get from randoms behind the fence...

hopefully i'll race again on Dec 7th
otherwise come see me a HONDA NETWORK ;)

[curtis265]

Had a go last night, my best run:

Car: AP1
Vehicle weight W/O driver: NFI. probably 1250-1300
Engine/setup/modifications: F20C + C38-81
Driven tyre type: Achilles ATR Sport 245/45/17
-------------------------
60ft = 2.232
E/T = 13.618
MPH = 106.6mph

I think i can't drive for shit hahaha

[cbauto]

nice tires

[RenzokukenJ]

nice tires
Where's your slip

[RenzokukenJ]

Car: VW Polo GTI 9N3 2006
Vehicle weight W/O driver: 1050KG
Engine/setup/modifications: Stock engine + bilstein shocks and H+R Springs, sway bar, APR tune, APR d/v, forge TIP, Audi R8 coil packs, ECS flywheel, stage 2 clutch, more can't remember
Driven tyre type: sunray Chinese edition 215/40/17
-------------------------
60ft = 2.222
E/T = 13.812
MPH = 104.1mph

Hello pop

[cbauto]

Where's your slip

I'm waiting.

[curtis265]

Thanks m8

They did a lot of hopping

[IEVAQ8]

update: 7th March 2015

eastern creek drag track (Jamboree)
turbo ek b18c (most of u know my setup)

on M\T slicks 24.5x8x15 (9psi)

11.88 @120mph
60ft was 1.85

backed it up with
11.89 @123mph
60ft was 1.86

[IEVAQ8]

update:

Heathcote park raceway (test n tune)
turbo ek b18c (most of u know my setup)

on M\T slicks 24.5x8x15 (9psi)

11.69 @127mph
60ft was 1.86

backed it up with
11.70 @127mph
60ft was 1.89

double backed it up with
11.69 @127mph
60ft was 1.87

[bennjamin]

Strong MPH

i mean I did 13.6@103mph last time I went to the drags

[cbauto]

waiting for 2 tone tank slip.

[RenzokukenJ]

Yh mun das it

[RenzokukenJ]

Worst thing I hate about the one here, dunno if it's standard, but they don't indicate when you've past the 1/4 part lol

[u mad?]

Worst thing I hate about the one here, dunno if it's standard, but they don't indicate when you've past the 1/4 part lol

lmao yh our old 1/4 was same, just fukin hammer it until you get to the dirt bra

[RenzokukenJ]

Lmfao fuk that, sand trap isn't long here buz, bit scare

[IEVAQ8]

Strong MPH

i mean I did 13.6@103mph last time I went to the drags

yeh MPH is good, my driving and 60foot and launch is rubbish, I dnt have enuf seat time or time to race it and get betta, but we will try...

especially now that our local track calder park is resurfaced and bak open....

fingers crossed by the end of the year we have setup the suspension and happy with how the car drives so we can put some more power into it ;)