DIY replace your blower resistor, fan not working on 1 and 2?

[altong0840]

Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!

is your eg having the fan level 1,2 not working but 3,4?
are you the guy dun want to rip off by the car shop?
do you want to have a nice air flow in your ride?
then diy!

aim:
fans work on all level

tools:
1 screw driver
1 new blower resistor (oem 25 bux)
steps:
1/ Remove your glove box- 2 screw under the glovebox
http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs184.snc1/6140_121624169396_637234396_2409156_2095138_n.jpg
2/ see pic, the finger i point to is the location of the blower resistor is
http://photos-f.ak.fbcdn.net/hphotos-ak-snc1/hs184.snc1/6140_121624274396_637234396_2409157_6911898_n.jpg
http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs164.snc1/6140_121624369396_637234396_2409158_5737379_n.jpg
3/ undo 2 screws replace the new one and plug on it
http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs164.snc1/6140_121624514396_637234396_2409164_5935323_n.jpg
4/ test the blower fan work every level

5/put everything back on

6/ enjoy nice air flow in your ride

[mocchi]

nice one altong! told you shouldve check the locals first instead of getting from me.

[altong0840]

yeah~man!thank you very much!!! hope we can meet up sometimes!!!!