PDA

View Full Version : EG3 breeze radiator



mugenrr
28-08-2009, 02:14 PM
Is an EG3 breeze halfsize radiator ok to use on a b18c conversion in a civic?
thanks guys

FastFwd
28-08-2009, 05:05 PM
I used to use my EG4 halfsize radiator on my b16a2 turbo'd for over a year and it worked fine.

Im sure the b18c will be ok as theres not much difference in the two motors heat wise.

mugenrr
29-08-2009, 12:47 AM
more input guys :)

Chriskoss
29-08-2009, 01:23 AM
Well you see alot of performance cars using 1/2 sized radiators, like those alloy ones. Dont see why it would be an issue and fastfwd mentioned he uses one with no troubles, so just go for it

FastFwd
31-08-2009, 10:46 AM
Mugenrr just run it and then watch your temps after install. You might need to get an aftermarket temp guage of some sort to read it but it if stays below 90 in winter for daily drive you should be fine. Anything higher you will need to worry about it in summer and upgrade to a koyo Fat half size like what i got. Mine runns daily in winter around 80 degree's in summer it runns around 88 daily.

With my old radiator it ran around 2-5 degree's more in winter or summer.