PDA

View Full Version : changing from 4x100 to 4x114


POPSIKAL
03-09-2009, 12:28 PM
how do i do it? lol,
what do i need
have a dc2 integra
Chi
03-09-2009, 12:36 PM
4x114.3 brake conversion from 96' spec JDM DC2R.

or

4x100 to 4x114.3 bolt on spacer


I would do the first choice if possible.
simonnowis
03-09-2009, 12:43 PM
4.114.3 swaps will set you back about $1k ish, your trying to swap for use of jdm rims right?
if your after actual braking performance getting the 5 stud 98+ itr/ek9 swap is better as they have 282mm rotor fronts, plus easier to find.
vinnY
03-09-2009, 01:32 PM
dc2 brakes = same size as 96spec brakes(unless you want to upgrade calipers and rotors front and rear)

safest way is to get the entire setup, should be bolt on to a dc2
you can even reuse your current calipers so you don't have to rebleed them
otherwise bolt on spacers would be the go
POPSIKAL
03-09-2009, 04:48 PM
say if i use bolt on spacers am i able to take them off to use 4x100 again? also i have a set of rota trak r's sprintheart reps are they able to be redrilled to fit 4x114.3?
vinnY
03-09-2009, 04:56 PM
you can run something like this (http://www.ozhonda.com/forum/showthread.php?t=119214)
SHOGUNOVDDRK
03-09-2009, 05:35 PM
I'm supprised the Rota's aren't multi-stud.
POPSIKAL
03-09-2009, 07:48 PM
my bad, the rota's are, sorry for my noobness lol
SHOGUNOVDDRK
03-09-2009, 07:50 PM
I figure no need for a change in studdage then?
POPSIKAL
04-09-2009, 09:20 AM
I figure no need for a change in studdage then?

yeah no need,
anyone no where i can sus out 96 jdm itr brakes?
riruiz_88
04-09-2009, 10:03 AM
they are exactly the same size you have at the moment man. or do you want to do a 4x114 conversion?
POPSIKAL
04-09-2009, 12:24 PM
i would like too but maybe i should wait and do a 5stud conversion
riruiz_88
04-09-2009, 05:50 PM
yeh if you want a stud conversion, go 5 lug. 90LAN has a package for just over 2grand including complete 5lug swap and DC2R rims.
Mugen_B16B
06-09-2009, 05:28 PM
man u guys got it all wrong, get a welder and weld on more studs and make a wish to the stud fairy, then u will get 4x114.3, how did u think i did this conversion LOL
POPSIKAL
16-09-2009, 08:34 AM
man u guys got it all wrong, get a welder and weld on more studs and make a wish to the stud fairy, then u will get 4x114.3, how did u think i did this conversion lol

i loled