Type R rear spoiler on a GSI

[Tegraww]

i have a 97 GSI and i really want a type-R wing..
is this possible?

if so how and were can i get one?

and just a question about the intake...am i better off taking the cover off or on??

THANKS :)

[m3ntAL_l2]

do u have a spoiler on ur car currently? if so just buy a type R one from ebay and do a stright swap

[Jump]

leaving the cover off = more sound but less power from hotter air

better to get a k&n pod/panel filter and leave the cover on

[Tegraww]

do u have a spoiler on ur car currently? if so just buy a type R one from ebay and do a stright swap

yeh i do!! :D
thx for the help

[Tegraww]

:thumbsup:
leaving the cover off = more sound but less power from hotter air

better to get a k&n pod/panel filter and leave the cover on

thx mate:thumbsup::thumbsup:

[civic_vi]

u can remove the resonator and give this a try

http://www.ozhonda.com/forum/showthread.php?t=73255&highlight=cold+air

[Tegraww]

sounds good

[TheSaint]

dont you already have a thread like this here?

http://www.ozhonda.com/forum/showthread.php?t=119572

personlly i dont like the k+n filters ... try get a branded CAI from the trade section of the website ... other than that ... give this a shot

http://www.ozhonda.com/forum/showthread.php?t=118977

or

http://www.ozhonda.com/forum/showthread.php?t=94709&highlight=blox

[Bludger]

next time, please create a better title than just "help"

it will make searching and reference to the thread a lot more easier.

[VTECMACHINE]

Wait hold on... it's not as simple as removing stock GSi wing, and slapping on a DC2R wing.

We have been thinking about putting a DC2R wing on my mates GSi. The GSi wing has LED lights, as a brake lamp ON THE SPOILER. The DC2R wing does not. AFAIK, GSi's do not come with the rear brake lamp attached to the rear window like DC2R and VTi-R. VTi-R have both the lights on the spolier, and the lamp attached to the window.

This means, that if you wanted to do the swap LEGALLY, you will need to source a Type R Wing, and the rear brake lamp from DC2R or VTi-R and make holes in the rear window to mount the lamp, then wire the lamp up.

Regarding the intake, I would retain the stock airbox, buy a Trust / Spoon (Same shit really, trust is cheaper) foam filter, put that in the stock box. Remove the resinator box in front right guard, and duct some 4 inch air con piping from bottom of air box to front bar. I used to have this setup, and it was awesome!

[Lukey]

my DC4 has a brake light on the back window.

[VTECMACHINE]

my DC4 has a brake light on the back window.

Lucky... my mates doesn't. What year model is yours? My mates is a 2000 model.

[GSi_PSi]

both my dc4's had brake lights. 1996 model and my current 1995.

[wynode]

next time, please create a better title than just "help"

it will make searching and reference to the thread a lot more easier.

Ditto. Thread title updated.

[Lukey]

Lucky... my mates doesn't. What year model is yours? My mates is a 2000 model.

1995. its just a matter of changing the wiring around or something

[Tegraww]

yeh mines got a brake light on the window too!
so i can get a spoiler without a brake light and it would still be legall

[GSi_PSi]

1995. its just a matter of changing the wiring around or something

yup just remove the plug from the spoiler and input it into the rearwindow one. Did it on my mates GSi

[Tegraww]

Sweet!! :D

[koevi]

ew type R spoiler on a gsi.....

[GSi_PSi]

no spoiler looks better, who would wanna look at a type-R anyway :P nuggets

[Tegraww]

ew type R spoiler on a gsi.....

nah man
spoiler :|

[_bORdO_]

*stands and claps @ GSi PSi*

No spoiler FTW!
Spoilers are purely cosmetic, plus its been proven that spoilers basically do nothing preformance wise unless your hitting 200km or 103mph.