PDA

View Full Version : RBB manifold porting


vaikis
10-09-2009, 04:42 PM
Hello, need some info on RBB manifold porting. Planing to get Acura TSX +06 TB and port match to RBB manifold, also whant to make light intake manifold porting. RBB intake manifold has 2 parts: 1 - INJECTOR ASSY 2 - MANIFOLD.
Whith part to port injector assy connection with manifold or injector part with head , or both. Any sugesstions ? Thanks.
integral90
10-09-2009, 05:36 PM
http://www.ozhonda.com/forum/showthread.php?t=116034

Good bang for buck :thumbsup:
vaikis
10-09-2009, 05:43 PM
http://www.ozhonda.com/forum/showthread.php?t=116034

Good bang for buck :thumbsup:

checked, but still don't understand which parts better to port in intake manifold ;) How to port match bigger TB with IM understand ;)
integral90
11-09-2009, 01:29 PM
checked, but still don't understand which parts better to port in intake manifold ;) How to port match bigger TB with IM understand ;)

Dremel the inlet on the IM to match the bigger TB. Port match the 2 sections of the RBB together, and if you want, port match the RBB to the block's inlet ports.

The last one isn't as important as the first 2.
vaikis
11-09-2009, 02:40 PM
Dremel the inlet on the IM to match the bigger TB. Port match the 2 sections of the RBB together, and if you want, port match the RBB to the block's inlet ports.

The last one isn't as important as the first 2.


thanks integral90 ;)