GE OEM Honda (Stanley) LED brake lights

[zwgbenny]

Hi all. Thought i share with you guys my recent part purchase from Singapore. It includes a pair of OEM JDM led rear lights and a 12 LED 3rd brake light.

12 LED 3rd brake light (there's also a 6 LED version)
http://i16.photobucket.com/albums/b2/zwgbenny/Jazz%20LED/IMG_0089A800.jpg

Back view of it
http://i16.photobucket.com/albums/b2/zwgbenny/Jazz%20LED/IMG_0090A800.jpg

OEM Stanley made rear lights
http://i16.photobucket.com/albums/b2/zwgbenny/Jazz%20LED/IMG_0098A800.jpg

LED
http://i16.photobucket.com/albums/b2/zwgbenny/Jazz%20LED/IMG_0099A800.jpg

Without rear foglight
http://i16.photobucket.com/albums/b2/zwgbenny/Jazz%20LED/IMG_0100A800.jpg

Back view
http://i16.photobucket.com/albums/b2/zwgbenny/Jazz%20LED/IMG_0097A800.jpg

Before
http://i16.photobucket.com/albums/b2/zwgbenny/Jazz%20LED/IMG_0103A800.jpg

After
http://i16.photobucket.com/albums/b2/zwgbenny/Jazz%20LED/IMG_0114A800.jpg

Just the position lights switched on
http://i16.photobucket.com/albums/b2/zwgbenny/Jazz%20LED/IMG_0116A800.jpg

The 3rd brake light LED wires have to be cut and joined to opposite polarity in order for it to work. No idea why but glad it works.
http://i16.photobucket.com/albums/b2/zwgbenny/Jazz%20LED/IMG_0109A800.jpg

[FitRS]

Top post! Thanks for sharing. Awesome pictures and descriptions.

This sorta addresses the problem that Tinter was talking about regarding the top rear mount light, that according to UNLS1, Honda Australia don't care about.
The JDM rear mount is slimmer thus allowing higher visability, thus safety.. aparently JDM is not as safety strigent as AUSDM... :o


zwgbenny, I've been thinking about using the LED rear lights, but what are your thoughts one when one or more LED light dies? Does that mean you'll have to replace the whole unit or can individual LEDs be replaced?

[zwgbenny]

zwgbenny, I've been thinking about using the LED rear lights, but what are your thoughts one when one or more LED light dies? Does that mean you'll have to replace the whole unit or can individual LEDs be replaced?

Yea you have to change the whole unit if one of the LED dies. I don't see Honda selling the LED panels in it as a part. But yea, after changing to the LED, the rear view is very much improved.

[dyljoy]

Great post and top result~

[betjai]

Nice..
similar to mine but I got RS tailight instead.. which the red lights glows and are LEDs also

http://i577.photobucket.com/albums/ss215/betjai/IMG_7160-1.jpg

but im now looking for 3rd LED brake light, can you pm me where u got it and price??
Wasn't sure about fitment of OEM 3rd brakelight but now you've done it, thanks for the heads up!

[040501912]

looking good!!

but i reckon the OEM AUDM rear light looks sweeter =p just my 2c

good job mate =)

[Mr BOB]

i got different one from China which is 6 LED 3rd break light & tail light with fog light on the right.

[Mr BOB]

By the way, those parts in China is bloody cheap...

[zwgbenny]

The lights looks like the original! Is it the Depo brand? How do you connect the rear foglight when there's no wire for it?

[dyljoy]

i got different one from China which is 6 LED 3rd break light & tail light with fog light on the right.

thanks for your info, I will head back to China this Nov, hope i can get sth good from there.:thumbsup:

[Mr BOB]

The lights looks like the original! Is it the Depo brand? How do you connect the rear foglight when there's no wire for it?

Yes, it is original one which i bought it from Guangzhou Honda.
I didnt connected the rear foglight anyway...

[Mr BOB]

thanks for your info, I will head back to China this Nov, hope i can get sth good from there.:thumbsup:

No worries man, hope u can get alot....

[dyljoy]

haha, u got it from GZ honda? there is my hometown, can u pm me about the price? cheers

btw, what rim u got? looks very similar to mine, what inch are they?

[Mr BOB]

haha, u got it from GZ honda? there is my hometown, can u pm me about the price? cheers

btw, what rim u got? looks very similar to mine, what inch are they?

rays g-game 77m 18x7.5 pcd 4x100 et +42

[dyljoy]

hoho, same as mine, but mine is 17inch.

[Mr BOB]

i saw u thread...nice work

[dyljoy]

ur bonnet made by Carbon or blk painted?

[Mr BOB]

ur bonnet made by Carbon or blk painted?

by carbon...

[040501912]

competition MR BOB VS DYLJOY go go go make the hottest GE8 =p

[Mr BOB]

DYLJOY is Mugen style...
Me? i don't know what style i have....

[dyljoy]

ha, ya, we are in difference style, BOB is stock vtis look with enhancement.

[FitRS]

competition MR BOB VS DYLJOY go go go make the hottest GE8 =p

We miss your J's Racing Black GE 08 WA!!

[kongfu]

DYLJOY is Mugen style...
Me? i don't know what style i have....

Go Spoon BOB!:thumbsup:

[zwgbenny]

Was looking at other forums and comparing the rear lights. From what i found out is Honda did not have a LED version for the bottom part which betjai has. Mr Bob's version is the Euro version and mine is the Japan version.

Quote from GE Club in Singapore.

Original HONDA RS tail Lamp (Euro/ Japan / thai or maybe Taiwan made) picture right. As long as it is HONDA... made..
- Top Tier, white portion, LED (Red in colour when turn on)
- 02 Tier is the signal Orange Lights & Reverse lights
- Lower tier is a EMPTY red Cluster (Japan / Thai) without bulb or connector.......
However due to the Euro Regulation to have REAR FOG LAMP......there is EURO version (Euro / Taiwan) on 01 of the Tailamp RED CLUSTER, you will find 01 bulb siting inside with a connector, HOWEVER all our local rides (JAZZ / FIT) Does not have a CONNECTOR or wiring for READ FOG LAMP. so therefore it is a UNUSED bulb.....

Euro
http://i16.photobucket.com/albums/b2/zwgbenny/eurrstaillampsr2.jpg

JDM RS
http://i16.photobucket.com/albums/b2/zwgbenny/jdmtaillight.jpg

[FitRS]

Yeah I think the only full LED is the axis style.

[dyljoy]

I like JDM one, hot as!

[040501912]

drooolzz droooollzz...

You can make your self a switch which you can actualy buy from honda.. for given part number. put some wire to the back.. there you ahve it! a nice rear fog light! =D easy easy

MR BOB i saw your car at william st @ Northbridge..

FAWWRRRKKK it makes me wet.. looking at the carboon goodies... ;) time to get lowered again .. =p looks like a 4wd when its sitting so high :(

and you need the wing at the back to complete the look too

[betjai]

thx for that research...
i wanted JDM RS ones...
looks better without the bottom tier on.. i suppose i can unplug them

[Mr BOB]

drooolzz droooollzz...

You can make your self a switch which you can actualy buy from honda.. for given part number. put some wire to the back.. there you ahve it! a nice rear fog light! =D easy easy

MR BOB i saw your car at william st @ Northbridge..

FAWWRRRKKK it makes me wet.. looking at the carboon goodies... ;) time to get lowered again .. =p looks like a 4wd when its sitting so high :(

and you need the wing at the back to complete the look too

I have no money at the moment...
I really really really want to change Tein one, man......
I'm pertty hate my car looks like a 4wd now!!!
The wing will come at next month, probably Mugen one with carboon make...
By the way, when u saw my car?

[dyljoy]

hey,man, not only tein now, u can have many choice from now e.g. Buddyclub,hoho

[Mr BOB]

i dont like the Buddyclub one...
i perfer tein or hks or cusco...

[dyljoy]

Go for tein, then!!

[Mr BOB]

Go for tein, then!!

yeah, i think i will choose tein

[Tinter]

Fabulous guys....so which is the better of the 2 country alternatives?
And in the Singapore one, what is the difference between the 6 LED and the 12 if you know?

Can you advise on a cost and part number?

Most grateful!
Rob.

[ggvfr]

I like the LED high level brake light and am trying to find one - at reasonable cost, of course.... ;)

Tinter and I have been doing a bit of looking, I have found one but it's horribly expensive - being from a Melbourne Wrecker....

Anyway, this is my first post... hopefully will get some pics up of my '09 Jazz - in the right place of course. Meantime, any feedback on sourcing this led light would be much appreciated.

Cheers :wave:
Garry

[zwgbenny]

The difference between the 6 and 12 is probably the intensity. The size of the cover is the same. Just the circuit board inside consist of more LEDs. I got it at around SGD$150. I do not have the part number with me as the sticker on the bubble wrap was peeled off.

I can ask how much is it for a mass order or something. Some fellow members are going to China for part sourcing?

[betjai]

i'm interested too for the brake light.. having hard time to find one as well...
any help would be appreciated

[zwgbenny]

I checked back with the dealer i bought from. They currently have no stock for it and needs to order from Japan and it takes around (6 - 8 weeks by sea) or ( 3 - 4 weeks by air).

If you guys are interested i can ask for cheaper price depending on amount to order.

[frekila]

By the way, those parts in China is bloody cheap...

How much were they selling the rear LED tail lights for Mr BOB. ?

And do they have the rear foglight switch (cant seem to fine a pic for it)?

Thx :)

[Mr BOB]

How much were they selling the rear LED tail lights for Mr BOB. ?

And do they have the rear foglight switch (cant seem to fine a pic for it)?

Thx :)

my one is about 200AUD shipping to here, but it dont have foglight switch......

[frekila]

my one is about 200AUD shipping to here, but it dont have foglight switch......

Can you confirm that the foglight light is only on one side? (Left side)
I recently bought mine from china as well and i thought the rear foglights are on both sides

Does anyone know if the UK version rear fog light is on the right or left side only or both sides?

[Mr BOB]

Can you confirm that the foglight light is only on one side? (Left side)
I recently bought mine from china as well and i thought the rear foglights are on both sides

Does anyone know if the UK version rear fog light is on the right or left side only or both sides?

yes, my one only on left side...

[eurojazz28]

i got different one from China which is 6 LED 3rd break light & tail light with fog light on the right.

hi hope you can help me out i need the part number of the red led 3rd breaklight

[Mr BOB]

hi hope you can help me out i need the part number of the red led 3rd breaklight

HI
here is the no. which i found from chinese dealar, 34270TG5H11

[Tinter]

i got different one from China which is 6 LED 3rd break light & tail light with fog light on the right.

Mr Bob,
Comparing the dimensions to the original 3rd light, how would you sum up the size comparison with the new LED unit?

Does it take the same mounting points as the Aussie OEM light, is it the same width and how much higher does it now seat because it is not as deep?

[Mr BOB]

Mr Bob,
Comparing the dimensions to the original 3rd light, how would you sum up the size comparison with the new LED unit?

Does it take the same mounting points as the Aussie OEM light, is it the same width and how much higher does it now seat because it is not as deep?

hi
the led one thinner than the aus one, i think its 50%..
and it bit wider than aus one
give u some pics~~~

http://fmn028.xnimg.cn/fmn028/pic001/20090327/22/00/large_roga_73565h206093.jpg

http://fmn027.xnimg.cn/fmn027/pic001/20090327/22/00/large_HjDq_73638m206093.jpg

http://fmn028.xnimg.cn/fmn028/pic001/20090327/22/00/large_MrKR_73583h206093.jpg

[Tinter]

I've contacted the main Singapore Honda dealer for this part and they have advised in no uncertain terms that they will not export so bad luck.:thumbdwn: