b series convertion eg/ef

[m.o.d.aus]

Hey i know ths question would get asked alot, but what makes changing an old eg or ef carby to efi b series.

What are common issues that ppl run into when swaping engines, wiring, gbox etc....

Looking at getting either a eg or ef, depending on price, condition etc, and im interested in doing a swap later on down the track.


Cheers Mod

[mugenrr]

carby eg is more work to be done

efi fuel pump , fuel lines need to be changed and wired up

bswap for dc2 is basically straight swap into eg with the dc2 engine mounts, and wiring loom

[baeshin]

with ef carby, cause its so old u need a modified wiring harness to your ecu, theres some adapters for it on ebay i last saw.

or u could jus look at that ef in the car for sale section with b swap in it already for sale

[m.o.d.aus]

okay thanks.
So i would be better going with a eg then, as a b18 was the plan.
Would i be able to use the dc2 fuel pump etc?

[baeshin]

if u get the fuel injected eg then u can use the stock fuel pump