PDA

View Full Version : Bypassin an Immoboliser


WATAJK
19-09-2009, 04:12 PM
Asking for a friend..
My mate has a 89 ZX TT wif n aftamarket immoboliser.
He broke the remote for it now if anyone knows a way to bypass or disable an immoboliser it would be grately appreciated if u could say it here.

Yes, i know this is a honda forum but my mates had no luck anywhere
JetSir
19-09-2009, 04:35 PM
if its a cheap aftermarket alarm or old one, you can try rip out the main control unit for the alarm n try.

Its worth a shot.
if it doesnt work its auto electrican time
Diz44zy
19-09-2009, 04:41 PM
Could duck into a Mister Minit and get a new remote. Cost is around $80. I had mine done. The guy programmed the remote came out to the car and checked that it worked. I also had a key cut and programmed for the same price.

Alternatevely there should be a little switch (mines red) wired in somewhere which you will need to press.
WATAJK
19-09-2009, 04:49 PM
Could duck into a Mister Minit and get a new remote. Cost is around $80. I had mine done. The guy programmed the remote came out to the car and checked that it worked. I also had a key cut and programmed for the same price.

Alternatevely there should be a little switch (mines red) wired in somewhere which you will need to press.

Wheres the place in melbourne?
Open today?
Diz44zy
19-09-2009, 04:55 PM
Mister Minit is in pretty much every major shopping centre. He's the guy in the small store that does shoe repairs, engravings, cuts keys etc. I went to Forest Hill Chase shopping centre. I know there are other stores at Eastland (Ringwood), Knox and The Glen. They are open 7 days week.
WATAJK
19-09-2009, 04:56 PM
yeah my mate went, guy told him needs new alarm..
300+ **** off no way lol
Bludger
19-09-2009, 05:02 PM
If you rip out the unit, then you're really ****ed.

an immobilizer is a cut in the wires to either fuel pump, ignition or starter.

Alarm will control when the circuit will join and if its gone, then the circuit is forever broken.
Diz44zy
19-09-2009, 05:06 PM
Damn did they tell him why? Might need to take it to an auto electrician. This might cost a bit of cash tho. Alternatively unplug the alarm module and see if that works (This worked on my Celica awhile back)
SuiJin
19-09-2009, 09:08 PM
bring it to me im in west foots and ill remove it for you. done removals in a fair number of cars.
Diz44zy
20-09-2009, 12:22 AM
Lol hows he gunna move it? Isn't that the point of this thread.
SuiJin
20-09-2009, 12:24 AM
well there is definately a kill switch for it.
Diz44zy
20-09-2009, 12:28 AM
It shouldn't to hard to find either, its probs just hanging around near the module somewhere.
WATAJK
20-09-2009, 01:41 AM
Its been sorted :)
Thanks for all the help though guys :)
Diz44zy
20-09-2009, 11:04 AM
how was it resolved in the end?
WATAJK
20-09-2009, 03:41 PM
His mate from the ZX forums came an did it, havent asked him yet how :S
Bludger
20-09-2009, 03:43 PM
probably just re-wired