need some help EK!! STILL NEED HELP

[sangyz]

Hey guys..

i just did a jdm 98 5 lug conversion and i bought i think either ek or integra handbrake cable as i was told i needed it for the conversion because mine previously was a drum brake SO. i did that and now i have a problem because my handbrake cable is to short. So question is what handbrake cable should i be using? thanks


Also i did a jdm b18cr conversion and the throttle body is to big for my old intake arm from the b16. Could i get the itr intake arm and still use my b16 intake box? or do i need to get the whole thing. THANKS

[mocchi]

Hey guys..

i just did a jdm 98 5 lug conversion and i bought i think either ek or integra handbrake cable as i was told i needed it for the conversion because mine previously was a drum brake SO. i did that and now i have a problem because my handbrake cable is to short. So question is what handbrake cable should i be using? thanks


Also i did a jdm b18cr conversion and the throttle body is to big for my old intake arm from the b16. Could i get the itr intake arm and still use my b16 intake box? or do i need to get the whole thing. THANKS

so what cable are you using right now?

[sangyz]

well the cable i am using right now i believe.. should be ek from what i remember not sure it was supplied by lan90. an i was told it was suitable for all ek/eg/teg

[mocchi]

how short is your too short? maybe didnt route the cable properly through trailing arm?
i got an ek handbrake cable if you want to test.

[bennjamin]

i just did a jdm 98 5 lug conversion and i bought i think either ek or integra handbrake cable as i was told i needed it for the conversion because mine previously was a drum brake SO. i did that and now i have a problem because my handbrake cable is to short. So question is what handbrake cable should i be using? thanks


IF you own a hatch....ANY handbrake cable from 4 discs hatchback/sedans will work.

Check that you havent routed the cable wrong(wrong whole on the trailing arm)


Also i did a jdm b18cr conversion and the throttle body is to big for my old intake arm from the b16. Could i get the itr intake arm and still use my b16 intake box? or do i need to get the whole thing. THANKS

the b16 intake will squeeze on with abit of WD40 or similar lube. But just get a ITR intake to fit perfectly.

[sangyz]

how short is your too short? maybe didnt route the cable properly through trailing arm?
i got an ek handbrake cable if you want to test.

i think it is routed properly as the mount sit perfect



IF you own a hatch....ANY handbrake cable from 4 discs hatchback/sedans will work.

Check that you havent routed the cable wrong(wrong whole on the trailing arm)

What if i used an integra one? will it matter? or are they the same length.



the b16 intake will squeeze on with abit of WD40 or similar lube. But just get a ITR intake to fit perfectly.

will i be able to use my stock b16 box? or i need to whole itr intake assembly

[sangyz]

OKAY UPDATE!! i wasnt sure what handbrake cable it was so i got another ek one and measured them and its the same length. Also the hand brake mounts all lines up properly it just ends up a lil short so cant bolt up inside the car wont reach that long bolt. SO would i need ITR or INTEGRA handbrake cables to suit with the trailing arms? or it maybe longer!? ... help me out guys ><


OR WHO WANTS TO COME HELP ME?!?! =[

[SuiJin]

where abouts are u located btw.

[sangyz]

sunshine

[zco]

check to make sure you havent moutned the right setup on the left. as benjammin said. you probably fed the cables through the wrong hole aswell..

iehter the integra and civic cables can be used on the hatch. you shouldnt have problems.

pics would help