best bang for buck header dc2r

[civic_vi]

Having trouble deciding on the last mod for dc2r

currently has cai, and 2.5" cat back with s10 twinloop


tossing up between the following;

replica rmf narrow
replica tri-y big tube
jdm itr 4-1

any reviews or comparison would be appreciated

[sinseven]

The replica rmf's have good reviews.

You should try honda-tech or other sites that would have more info on these particular headers that your after

[RR-04-RR]

i Have replica tri-y on my car.. very good on the dc2r but not the best ground clearance.

do you have a/c or p/s on the car.. if so.. you would be able to fit bigtube.. you'll need to go small tube

[civic_vi]

still have a/c and p/s, would small tube be suitable for a dc2r with i/h/e and tune?

[RR-04-RR]

still have a/c and p/s, would small tube be suitable for a dc2r with i/h/e and tune?

if your dc2r has a/c and p/s.. the big tube headers will not fit.. only the small tube will.. and not too sure with other headers.. but with the tri-y's you'll need to change your flywheel cover to a b16a flywheel cover.. i just got mine from jdmyard.. easiest thing to remove and replace

[zco]

with a little bit of research, you should find your answer

try to use the search function for previous discussions and topics along this nature. dont limit your search to just ozhonda. try www.honda-tech.com aswell. there seems to be some great knowledge there

but in short, your gains would be depending on a combination of parts, and not just anything off the shelf and put together. you need to know what you want from your car and then research and find the relevant parts that would make your car feel the way you want it to.

hope that helps, and remember. search :)