View Full Version : Windscreen Washer Jets
WATAJK
22-09-2009, 10:25 PM
Ok today i noticed the passenger washer jet (theres 2 in the one jet, this one being the one on the farrr left) has begun to shoot water way past my windscreen... Like honestly its like theres alot of pressure in it?
The same squirter in the jet next to it is working fine?
Any idea?
Thx
riruiz_88
22-09-2009, 10:32 PM
maybe use a sewing needle and push it in the nozzle to unblock it, if it is partially blocked. but do it to the one that is squirting normal.
or use an air compressor gun, pull one rubber hose off and put the air gun into that hose. pull the trigger and see if debris comes out from the nozzle.
vinnY
23-09-2009, 09:42 AM
you can adjust the little squirter thingo can't you?
SHU-ES1
23-09-2009, 09:44 AM
you probably just need to clear it out, might have got some polish/wax or even dirt in there. i use to have one that shot over the windscreen! just take it off if you can, and dunk it in some hot water and blow through the bottom of it where the hosing connects to, or use the air compressor trick if you have one available.
WATAJK
23-09-2009, 02:11 PM
you probably just need to clear it out, might have got some polish/wax or even dirt in there. i use to have one that shot over the windscreen! just take it off if you can, and dunk it in some hot water and blow through the bottom of it where the hosing connects to, or use the air compressor trick if you have one available.
Yeah well one is shooting over, the other is shooting but with less pressure.. The other jet works absolutely fine
Bludger
23-09-2009, 03:22 PM
you can adjust the little squirter thingo can't you?Vinny is correct, more often than not, the squirters are a little ball in a socket, which rotates around.
WATAJK
23-09-2009, 07:58 PM
Vinny is correct, more often than not, the squirters are a little ball in a socket, which rotates around.
yes i understand what u guys are saying...
One of the washers in there is shooting the water at a much higher pressure then the one next to it.. Therefore it i was to raise them both up so they both miss the windscreen, one would shoot over the top and reach the car behind me while the other doesn't have enuff pressure and will still reach my windscreen...
Get what im saying now?
drsilliez
23-09-2009, 07:59 PM
use it to shoot cars that try to overtake u on the left....! lol
but yeah, prob just blocked or something..
WATAJK
23-09-2009, 08:08 PM
use it to shoot cars that try to overtake u on the left....! lol
but yeah, prob just blocked or something..
Yeah a prick highbeam'd me tontie, i showed him water!!! :D
He went wtf wen i got his windscreen..
I fink there might be blockage in the bit when water gets to the jets..
Ill put a needle in and see how that goes i guess..
Or somethin wire
Bludger
23-09-2009, 08:10 PM
they are blocked, clean them.
end of story.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.