PDA

View Full Version : Will KMAC ek springs fit onto EG/dc2 shocks ?



JDM-EGG
24-09-2009, 02:32 AM
hey guys , just simple question will kmac ek springs fit onto eg shocks ?

cheers

LLS
24-09-2009, 07:52 AM
Pretty sure it can

LAGOOT
24-09-2009, 03:22 PM
yes, they will fit

Dy_
24-09-2009, 04:05 PM
yep!!

integragsi96
01-04-2010, 11:48 AM
sorry to highjack the thread but will ek super low king springs fit onto a dc2/4 kyb excel-g gas shocks?

Limbo
01-04-2010, 12:22 PM
all the eg/dc/ek springs are interchangable.

The height seating will be slightly different though. Learnt the hard way with dc2r shocks on my EK

integragsi96
01-04-2010, 12:29 PM
really? like higher or lower?

Limbo
01-04-2010, 12:37 PM
car sat lower

integragsi96
01-04-2010, 12:45 PM
really? interesting...well it should be a clean fit then

flipfire
02-04-2010, 06:25 PM
I remember the same EK superlows (2.5" drop) was the ultra lows (3.5" drop) for EG.

or could be the other way around. Check the king springs web site

bennjamin
02-04-2010, 06:28 PM
just to help out

EG and DC share the same LENGTH front springs and shocks. There is very slight difference in rates.
The EK however , runs slightly longer springs. Why ? NFI.


So , that means you must compensate this in your spring choice...for example EK front springs on a EG or DC will sit HIGHER than indicated. EG springs on a EK will sit LOWER than indicated.

integragsi96
03-04-2010, 01:47 PM
thanks all......