PDA

View Full Version : question about the amuse gt1 kit



stndrd
28-09-2009, 03:20 PM
after doing some research i was told by a reputable parts importer that the cat back exhaust that was designed to go with the amuse gt1 kit has been superceeded a couple of years back and that you have to modify the rear bumper if you want to fit a R1000 cat back or similar.

what i am wanting to know is what would be involved in either modifying the bumper (from anyones past experience) or custom fabricating a cat back exhaust that has the tips coming out about half way up the rear bumper to suit the gt1 rear bar?

joek
03-10-2009, 07:40 PM
Hi, mate. According to my understanding, if u are trying to import the genuine amuse kit from japan, they are being made to order. Hence, u can actually place a special request regarding that, at least that is what happened to my friend's s2000 with Amuse kit fitted in Motorware. Hope this info helps u abit
Joe

vyets
04-10-2009, 12:36 PM
If you want to fit the R1000 you have to cut a hole in the rear bar. Or just custom make an exhaust that goes up into the rear bar holes :) so it sits how it's meant to be


http://img123.imageshack.us/img123/7492/dsc00759ie3.jpg (http://imageshack.us)
http://img123.imageshack.us/img123/1085/dsc00760ty1.jpg (http://imageshack.us)
http://img123.imageshack.us/img123/2548/dsc00780rj0.jpg (http://imageshack.us)

stndrd
06-10-2009, 10:38 PM
ah thats good to hear. thanks alot for the help once again =]